Used Camlock for sale (151)

Condition: as good as new (ex-display), Year of construction: 2025, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swivel diameter over cross slide 270 mm Swivel diameter in the bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle face CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kg Machine dimensions 2700 x 1080 x 1370 mm Accessories - 3 axis DRO - 3 jaw chuck - 4 jaw chuck - Faceplate - Tailstock Iedjxbzqqjpfx Ag Uotb - Cooling unit - 4-.fold toolholder - Splash guard - Chuck protection - Manual The lathe is in factory brand new condition. Showroom model. It is with 12 months of warranty in Hungary.

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates Itsdpfxsdu Ufvj Ag Usb -Outer diameter: 270 -Cone: Ø 139.7 mm -Camlock recording -Weight: 13 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange Iedpfx Agoduacqe Ustb -Chuck flange: with driving pin -Outside: Ø 192 mm -Camlock cone size: 6 (106 mm) -Bolt circle: 2 x 160 mm bolt diameter 18 mm -Weight: 6 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm Itodpfx Agst Sz Evs Ujb -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm Iedjxuflfopfx Ag Uotb -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck type DURO-S chuck size Ø 160 mm Ijdpfov Tlryex Ag Ujtb -Passage: Ø 42 mm -Bolt circle: Ø 83 mm -Mounting: Short taper 4 / cone 56 - 62 mm short taper flange with Camlock fastening -Dimensions: Ø160 x 115 mm -Total weight: 9.6 kg

Condition: good (used), Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Röhm, four-jaw chuck Ø 200 mm Ijdpfx Agjtxklyo Ujtb -Passage: Ø 55 mm -Bolt circle: Ø 133 mm -Mounting: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Accessories: incl. 2 sets of interchangeable jaws and clamping tool -Dimensions: Ø200 x 185 mm -Weight: 24 kg

Condition: new, Year of construction: 2026, faceplate diameter 1000 mm faceplate with 4 clamps: inkl. boring diameter 280 mm weight 419 kg 4-jaw faceplate K72 – Ø 1000 mm Our high-precision 4-jaw faceplate K72 1000 mm was specially developed for the secure and reliable clamping of a wide variety of workpieces on lathes – ideal for asymmetrical, rectangular or difficult-to-position components. Technical features - Diameter: 1000 mm - Design: 4-jaw faceplate, independently adjustable jaws - Material: High-quality cast body for maximum stability and vibration damping - Clamping jaws: Standard with hard clamping jaws Optional clamping claws according to customer requirements (soft, special shape, special size) - T-slot design: for flexible additional clamping forces - High concentricity with heavy workpieces - Suitable for large turning diameters and high clamping forces Mounting & standardisation The K72 faceplate is not standardised as a complete faceplate (no uniform DIN or ISO standard for diameter, jaw geometry or hole patterns). However, the machine mounting is based on common standards, e.g.: - DIN 6350 (centring mount) - DIN 55029 (camlock mount, e.g. D11 / D15) Iodpjx S Ry Sefx Ag Uotb = This allows adaptation to almost any machine, either directly or via adapter solutions. Other sizes & designs available on request In addition to the K72 1000 mm, we also offer other large faceplates for heavy-duty and special applications: K72 1250 mm K72 1800 mm K78 1800 mm K78 2000 mm ? Delivery to order ? Customised mounting design ? Clamping claws na Translated with (free version)

Condition: new, Year of construction: 2026, faceplate diameter 1000 mm faceplate with 4 clamps: inkl. boring diameter 280 mm weight 419 kg 4-jaw faceplate K72 – Ø 1250 mm Our high-precision 4-jaw faceplate K72 1250 mm was specially developed for the secure and reliable clamping of a wide variety of workpieces on lathes – ideal for asymmetrical, rectangular or difficult-to-position components. Technical features - Diameter: 1250 mm - Design: 4-jaw faceplate, independently adjustable jaws - Material: High-quality cast body for maximum stability and vibration damping - Clamping jaws: Standard with hard clamping jaws Optional clamping claws according to customer requirements (soft, special shape, special size) - T-slot design: for flexible additional clamping forces - High concentricity with heavy workpieces - Suitable for large turning diameters and high clamping forces Mounting & standardisation The K72 faceplate is not standardised as a complete faceplate (no uniform DIN or ISO standard for diameter, jaw geometry or hole patterns). However, the machine mounting is based on common standards, e.g.: - DIN 6350 (centring mount) - DIN 55029 (camlock mount, e.g. D11 / D15) = This allows adaptation to almost any machine, either directly or via adapter solutions. Other sizes & designs available on request In addition to the K72 1000 mm, we also offer other large faceplates for heavy-duty and special applications: K72 1250 mm K72 1800 mm Itjdpfx Agsx S Rzce Ueb K78 1800 mm K78 2000 mm ? Delivery to order ? Customised mounting design ? Clamping claws na

Condition: good (used), Year of construction: 1994, Diameter: 500mm 3 Chuck: yes Itedpfxsx Ttc Eo Ag Uob Spindle bore:160mm Connector: CAMLOCK D-8" Max. speed: 1900Rpm Length: 0mm Width: 0mm Height: 0mm Weight: 60kg

Condition: used, Coordinate grid Diameter 180 mm Clamping surface 100 x 110 mm Itodpebipxwefx Ag Ueb short taper 63 mm Camlock system mounting flange interchangeable

Condition: new, The Basic Plus is a versatile Conventional Horizontal Lathe within the Metal Lathes product group, designed for single part production. Its robust construction ensures precision, making it an ideal choice for repair shops, training institutions, and various workshops. The Basic Plus features hardened and ground headstock gears, a Camlock D1-4" mount with a bore diameter of 38 mm, and adjustable tapered roller bearings for improved functionality. With a compact design and a small footprint, this lathe offers an array of standard equipment including a quick change tool holder and a 3-axis position indicator. Taper turning is facilitated with a movable tailstock, and the robust cast-iron bed provides stability during operation. Explore the extensive selection of optional accessories to fully customize your lathe experience. Order online to elevate your workshop capabilities with KNUTH's high-quality machinery. Itodpfxeu Rc Hts Ag Ueb

Condition: good (used), functionality: fully functional, spindle bore: 37 mm, turning diameter: 250 mm, turning diameter over bed slide: 250 mm, center height: 125 mm, turning length: 1,000 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,200 mm, spindle speed (max.): 2,000 rpm, rotational speed (max.): 2,000 rpm, Manufacturer: Harrison Model: M-250 Condition: Used Maximum turning diameter over bed: 250 mm Maximum turning length between centers: 1000 mm Spindle bore: 37 mm Maximum spindle speed: 2000 rpm Spindle mount: Camlock Toolholder type: Drehblitz Itsdpfxex Rrpfe Ag Ujb Machine dimensions (L x W x H): 150x80x120 Connection voltage: 400 V Cooling system: Yes Digital readout: Yes, 2 axes

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Itedsh Hvk Aopfx Ag Uob Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Isdpfek Egrpox Ag Uotb Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° Iedpjucgr Iofx Ag Uetb - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, L + Z Lathe TONGIL- SAEILO Type TIPL-4SP Machine No. 00570319 Year of manufacture: 1985 Centre distance: 1000 mm Swing over bed: 400 mm Swing over cross slide: 210 mm Centre height over bed: 200 mm Centre height over cross slide: 105 mm Spindle bore: 58 mm Spindle speed: 55 - 1600 rpm, 16 steps Feed: Longitudinal and cross Tailstock taper: MT4 Chuck flange: Camlock, taper size 6 Motor power: 4 / 6 kW Isdpfxex Urbve Ag Uotb Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear stages - 3-jaw scroll chuck RÖHM Ø 200 mm with stepped jaws - Multifix quick-change tool post size B with 2 exchangeable tool holders - Spindle brake via mechanical foot pedal - Coolant system - Emergency stop - Machine lamp Space required (L x W x H): 2250 x 1050 x 1220 mm Weight: 1500 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 320 mm -Take: Camlock short taper 6 -Hole circle: Ø 133 mm -Through hole: Ø 95 mm Iodogqylxspfx Ag Uetb -Weight: 40 kg

Condition: good (used), Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck, faceplate, faceplate chuck, facing lathe chuck -Manufacturer: SAN OU, K72 series four-jaw faceplate chuck type D Ø 300 mm -Passage: Ø 95 mm -Bolt circle: Ø 135 mm -Mounting: Mounting: Short taper 6 / cone 103 - 106 mm short taper flange with Camlock fastening -Dimensions: Ø300 x 190 mm -Weight: 40 kg Iodpfxjt Sz Ide Ag Ustb

Condition: good (used), Faceplate, faceplate chuck -Mouth size: Ø 500 mm -Camlock: Short taper flange, taper size 11, bolt circle Ø 235 mm -Weight: 67 kg Iodpfx Agodu Ufme Ustb

Condition: good (used), Chuck adapter, three-jaw chuck, three-jaw lathe chuck -Outer diameter: Ø 300 mm -Camlock cone mount: Ø 139 mm, size 8 Ijdpfsb A Sziex Ag Uetb -Bolt circle: Ø 172x6 mm -Receiving thread: Ø 80x5 mm -Weight: 46 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck Iedpfsduiwvox Ag Ujtb -Chuck size: Ø 240 mm -Camlock: 3-bolt mount, hole circle Ø 140 mm, short taper Ø 102 mm -Throughout: Ø 77 mm -Weight: 29 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange with: driving pin -Outer diameter: 190 mm -Camlock fastening: DIN 55029 -Cone size: 5 -Hole circle: Ø 104.8 mm Itsdjd Hcqyjpfx Ag Ueb -Weight: 8 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driver flange -Chuck flange: for three-jaw chuck, four-jaw chuck, face plate -External: O 270 x 110 mm -Inside: O 240 x 81 mm -Mount: Camlock short taper 8 (139 mm) Itjdpeb Hd Ucofx Ag Ueb -Bolt circle: O 171 mm -Number: 1x disks available -Price per piece -Weight: 16.6 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange Isdpfxed Hcrhs Ag Uetb -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 230 mm -Camlock mount: DIN 55029 -Cone size: 6 -Hole circle: Ø 6 x 133.4 mm -Weight: 10 kg