Used Calibrate for sale (902)

Condition: used, functionality: fully functional, grinding width: 630 mm, grinding height: 150 mm, height adjustment type: electric, - Italian-made - Used sander, in very good condition TECHNICAL SPECIFICATIONS: - Maximum working width: 630mm - Maximum working height: 150mm 1 unit: + - Grooved rubber calibrating roller + pad + 1 metal roller: + *from above: - Rubber feed-in slip roller: + - Processing unit: + - Rubber feed-out slip roller: + Gedpsw Ip Ekofx Abbekd *from below: - Rubber slip roller: + - Feed belt: + - Pneumatic belt oscillation with photocells: + - 2 feed speeds: 0.28kW - Motor: 6kW - Electric brake: + - Electric table elevation: + - Working pressure: 6-8 bar - Extraction nozzle diameter: 150mm - Overall dimensions (L/W/H): 1070x1320x1900mm - Weight: 722kg

Condition: excellent (used), Poly-Clip DFC 8162 Automatic Double-Clipper. can fit most vacuum fillers. Suitable for large calibres up to 180mm, Gjdpfxsxbxxrs Abbokd

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 litres Performance for temperature testing: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance for climate testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) Gkodpfxexgd Rdo Abbed Feel free to contact us by phone for any further questions.

Condition: reconditioned (used), The JUKI MB-1800B is an automatic button sewing machine designed to deliver high speed, precision, and reliability. Manufactured by the Japanese brand JUKI, a benchmark of excellence in industrial sewing machinery, this model meets the needs of workshops, garment factories, and tailoring shops requiring productivity and consistent results. The machine is used but has been fully overhauled by our specialized technicians. Every component has been inspected, cleaned, and tested to ensure performance equal to a new machine. It is reliable, ready for immediate use, and guaranteed to provide long lifespan and impeccable stitch quality. Brand / Model: JUKI MB-1800B Type: Automatic button sewing machine Godpfxoxrb Nhj Abbskd Condition: Used – fully serviced and tested Sewing system: Double-needle movement for even and durable stitches Sewing speed: Up to 1,500 stitches/minute (depending on fabric and button type) Applications: 2- or 4-hole buttons on light, medium, and heavy fabrics Quick adjustments for stitch length, thread tension, and stitch count Automatic lubrication to minimize wear and ensure low maintenance Quiet, high-performance motor—ideal for intensive production environments Advantages The JUKI MB-1800B is engineered for high performance and practical, reliable operation: • Fast and accurate button sewing with perfect centring and secure attachment. • Wide versatility—compatible with various button types and sizes. • Easy adjustments to accommodate different materials and thicknesses. • Robust build and reliable mechanics, characteristic of JUKI quality. • Low noise and minimal vibration for a comfortable working environment. • Simplified maintenance, thanks to automatic lubrication and easy access to key components. Overhauled This machine has been fully reconditioned by our specialized technical department: • Replacement of all wear parts with original or certified compatible spares. • Comprehensive cleaning and calibration of the motor, mechanisms, and sewing systems. • Functional sewing tests and final quality inspection. Delivered ready for immediate operation, the JUKI MB-1800B ensures reliability, precision, and consistent performance, backed by the assurance of a professionally refurbished product. Application Fields The JUKI MB-1800B is suitable for tailoring workshops and industrial garment production. It is ideal for manufacturing men’s, women’s, and children’s apparel (shirts, jackets, trousers, coats). Widely used in the textile and fashion industries where speed and uniform sewing are essential. JUKI is synonymous with Japanese quality and precision. The JUKI MB-1800B – Used and overhauled – is the perfect choice for those seeking professional performance, durability, and value. Thanks to meticulous reconditioning and JUKI’s renowned build quality, it delivers high accuracy and productivity, reducing processing times and enhancing the finish of each garment. Reliable, durable, and ready to use, this machine is a sound investment for tailoring workshops, garment manufacturers, and companies that prioritize efficiency and quality.

Condition: ready for operation (used), Year of construction: 2016, Main Drive Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 1500 mm Z-Axis Movement 700 mm Additional Equipment Gkodpfexllpljx Abbsd Renishaw PH10M Plus head Air Supply: Clean compressed air required Ambient Temperature: Stable temperature (20 °C ±1 °C) required This 5-axis LEADER Miracle NC8157 was manufactured in 2016. It features a Renishaw PH10M Plus head and a range of 1500x800x700 mm, fully calibrated for precise measurements. Consider the opportunity to buy this LEADER Miracle NC8157 CMM machine. Contact us for more information. Application Types Measuring

Condition: used, Year of construction: 2014, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Gksdoxpxfbopfx Abbsd Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (7x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: used, Power: 1 kW (1 HP) Manufacturer: Erweka Model: AR400 Type : Oscillating powder granulator Power : 0,5 KW Coupling for quick and easy attachment of various devices. Gkjdpfowwmmrjx Abbjd Available tools: FGS calibrator (Mesh size: 1.40 (x3); 1.25; 0.80 (x2); 3.15 (x2); 0.1) Materials in contact with product: stainless steel Variable speed

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT ROLLER, 2ND BELT COMBINATION UNIT ROLLER/SHOE FOR SOLID WOOD, VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING SHOE WIDTH mm: 50 - MAIN BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER hp: 0.75 - Infinitely variable feed belt gearbox, speed adjustable m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR hp: 0.33 Gedpfx Asw Tfwtjbbjkd - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed Availability: short notice Location: Flörsheim

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 1438016140010, Checkweigher Mettler Toledo / Garvens Model C3570 Year built: 2020 Weighing capacity: 360–1400g Calibration still valid Software included Godpoxnmy Rofx Abbekd

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info Gkodpog N Nlvefx Abbjd iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: used, Year of construction: 2016, functionality: fully functional, total width: 2,470 mm, total length: 1,690 mm, total height: 2,050 mm, overall weight: 1,650 kg, type of input current: AC, input voltage: 230 V, power: 3.5 kW (4.76 HP), control voltage: 230 V, Equipment: documentation/manual, - Optical color sorting system for sorting copper, aluminum, and brass - 7 trichromatic, high-resolution cameras on the front and rear provide perfect detection of even the smallest differences - Sorting of material up to a size of 30 mm possible - Feeding via 7 individually adjustable vibrating chutes - Material ejection by compressed air (4 bar) Godpfx Abjxrt Hrobokd - The system features 7 outlets (3+2+2), allowing simultaneous separation of two different material streams - Material feed via dual-chamber hopper - Program settings and adjustments can be made via user-friendly software - Creation of custom programs for sorting materials is possible - Automatic diagnostics and calibrations ensure functional stability of the machine - Service via internet and remote access possible - Weight: 1,650 kg - Dimensions in mm (W x D x H): 2470 x 1690 x 2050 - System was in operation until recently (2025) - User manual available

Condition: used, Year of construction: 2017, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (8x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station Gkjdpfoxpxc Tox Abbed FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: used, Kündig ENORM PRIMO - TOP FIXED TABLE MACHINE / automatic head positioning Wide-belt calibrating and fine sanding machine Combination unit with contact roller and sanding pad unit featuring electronically controlled segmented sanding shoe Enormatic Digital thickness display for workpiece height Belt drive motor power approx. 9 kW Contact roller level steplessly adjustable according to grit scale Infeed and outfeed tables with roller support Gkodoxu Dqmepfx Abbed Working width 1100 mm Feed speed 2.5 – 15 m/min Machine will be WORKSHOP-REFURBISHED Available ex-stock Lieboch

Condition: used, Year of construction: 1990, Used machine Year of construction 1990 Sanding width 1350 mm Sanding thickness max. 150 mm 2 belt machine 1st unit grooved steel calibrating roller 2nd unit KOMBIAGGREGAT - with rubber sanding drum 65 SH (newly rubberized) - Pneumatic sanding shoe Belt cleaning device (rear only) Insert control for sanding pad (synchronized with feed speed) Brush roller for cleaning Infinitely variable feed speed 4-20 m/min (Vario gearbox) Gksdpfx Aow I Uttebbjd Automatic table positioning (workpiece thickness) Digital display for workpiece thickness Motorized height adjustment of work table Machine is completely overhauled Pictures show machine in not yet overhauled condition Availability: by arrangement Storage location: Hochheim

Condition: good (used), Year of construction: 2018, Xerox Versant 3100 - 06/2018 🌟 We're excited to present a fantastic deal for this high-performance, pre-owned Xerox Versant 3100 digital printing machine! 🎉 Perfect for professional print environments, this machine is packed with essential features for efficiency and top-quality output. 📈✨ Technical Specifications and Included Features: - 🌡 Cooling/Decurling Module: Keeps prints smooth and flat for a polished finish. - 🎯 Full-Width Array: Achieves automatic, precise color calibration and image alignment. - 🚀 EFI Fiery NX Controller (External): Delivers high-speed processing and enhanced color accuracy. - 🎨 EFI ES 2000 Spectrophotometer: Ensures consistent, professional color matching. - 📄 Dual High-Capacity Paper Trays: (2 x 2,000 sheets) for extended print runs and efficiency. Godpfx Absu Ik Ugobskd - 📏 Extended Output for XLS Format: Handles sheets up to 660 mm in length, ideal for a variety of formats. - ✉️ Envelope Kit for Paper Trays: Versatile paper handling, including envelope printing. - 📚 Production Ready Finisher with Booklet Maker: Includes booklet-making and 2/4-hole punching. - 🔥 Fiery FS200 Pro System: High-powered processing for demanding print jobs. - 🎨 Graphics Art Package: Equipped with Image Viewer, Compose, and Impose tools. - 🎛 Color Profiler Suite: For advanced color profiling and management.

Condition: used, mileage: 32,274 km, power: 355 kW (482.67 HP), first registration: 02/2024, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, next inspection (TÜV): 02/2025, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, navigation system, soot filter, STANDARD SPECIFICATION Mechanical cab suspension Adaptive Cruise Control with FCW and AEBS-3 Lane Departure Warning System Goodyear RR, not applicable Euro 6 emission class TraXon automated transmission, 12 gears Standard component layout Left-hand fuel tank DAF Connect Powertrain Plus Warranty - 3 years - 300,000 km Options Rear power take-off switch, version 2 Sleeper High Cab Front chassis version: no floor plate Exterior sun visor Signal horns, 1 set LED headlights and fog lights LED skylights Two LED headlights for rear cab wall Rear window: double-glazed No front mirror DAF Corner View Rear view camera, prepared Central locking, 3 keys, 2 remote controls Adjustable Short roof spoiler, Sleeper High Cab Roof spoiler color: Crystal White Leather steering wheel Dashboard finish: Plateau Cab interior trim: Argenta Door trim: Loosely woven fabric Driver's seat: Super Air Armrests on both sides of the driver's seat Passenger seat: Cinema andamp, table, fabric cover Refrigerator and drawer Extra Comfort mattress for lower bunk Upper bunk Protective net on both bunks Curtains with divider Automatic cab climate control Roof hatch with electric operation Accessory power supply: Standard 2x 40 A ECAS remote control with extended functions FMS connector, extended and prepared Toll preparation Digital tachograph, VDO 1C, version G2V2 Speed limit setting: 90 km/h Tachograph calibration DAF Infot. Exclusive pre-installed, luxury speakers Antennas: DAB-prepared, radio, 2x mobile antennas. GNSS Extra: CB Wireless Charger Rear View Alarm Turn Assist Ready Front: 8.00 t, Parabolic, 165 N Rear Axle 2, 8000 kg, Load Index 156 Axle Load Monitoring Leaf Spring Suspension, Front: Medium Front Axle(s): 385/65R22.5 Driven Rear Axle(s): 315/80 R22.5 2nd Driven Rear/Trailing Axle: 385/65R22.5 F1,385/65R22.5GO KMAXS2 160/000 K Steering BBA R1,315/80R22.5GO KMAXD2 156/150 L Traction DCA R2,385/65R22.5GO KMAXS2 160/000 K Steering BBA Gkedpfeui Dycox Abbed MX-13 engine, 355 kW/483 hp Cab emblem: 480 ECO performance No automatic idle shutdown Traction assist 15.0 t Rear axle ratio 2.64 Mechanical differential lock ZF Intarder Wheelbase 4.80 m / rear overhang 2.70 m Longitudinal member 310/7.0 mm, with internal adjustment front/rear Exhaust pipe right EAS unit right, horizontal 75 l exhaust tank left 620 l aluminum fuel tank left, height 620 mm Prepared for rear work lights Cross member D137 Rockinger coupling D130 Electrical connection for trailers, 24 V/15-pin Analog body signals and warnings Chassis with analog connection for engine speed control ECAS control CAN J1939 functions in the body connector Application connector product-market combination Application connector for the BB remote control Side marker lights Body mounting method BAM 1, console type B PTO engine rear, 1 o'clock, control without clutch, pump drive 130 A generator, 2 x 210 Ah AGM batteries Battery energy monitoring Dust shield Construction: S 21 with 210 mm frame, 50 mm support blocks (always specify when ordering) Additional container centering in the rear area, without support Hole pattern in the subframe for screw mounting (50 x 50 x 15) Screw-on underrun protection R58.03, hydraulically folds out 850 mm to the rear, final paint finish RAL 7021, including sensor and safety circuit, additional hydraulic section, 2 x 12 mm hydraulic lines to the rear

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Godpfx Absxhg Disbskd Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 47040940, measuring range X-axis: 3,500 mm, measuring range Y-axis: 6,000 mm, measuring range Z-axis: 2,000 mm, type of input current: three-phase, Equipment: documentation/manual, lighting, type plate available, Portal measuring machine Manufacturer: Mora Type: U204-20-35-60 Measuring software: Manufacturer Gemodek, type MS10 Mobile control panel Gksdpfx Aswyag Robbed Measuring and evaluation unit 2 PCs, manufacturer HP, type XW4300/Z220 2 monitors, 19/24" Roller shutter cabinet, telescopic drawer cabinet, Manufacturer Lista, width 1,000 mm, 7 drawers Contents: Infrared measuring probe manufacturer Renishaw type PH10M, calibration mandrel, accessories

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 1,950 mm, type of input current: AC, total width: 1,900 mm, total length: 2,020 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 5,800 kg, input voltage: 230 V, compressed air connection: 6 bar, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Reference Measuring Device Mahr OMS 1000 Multisensor The all-round measuring device for the broadest range of components or pallet measurements Factory-refurbished premium multisensor measuring center with warranty, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or freight forwarding, worldwide. Online or on-site demonstrations with customer parts available, application-specific consultation by accredited Profitech metrology laboratories during project planning. Full service possible: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Customized training and education programs also available as online courses. Rental, hire-purchase, or financing possible directly through Profitech and without a financial institution. Measuring device can be configured individually to customer requirements. Measurement accuracy: E1 = 1.3 + L / 400µm E2 = 0.9 + L / 600µm E3 = 2.2 + L / 300µm Measuring range: approx. 1000 x 1000 x 350 mm Includes optical sensor (camera & laser) Renishaw TP200 probe system incl. Standard Force Module Gedoxbpgtepfx Abbskd CNC control incl. hand control panel 27-inch flatscreen monitor Evaluation station incl. Windows 10 operating system (Windows 11 available on request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) suitable for production-related measurements Optical sensor: • Pure grayscale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled video image storage • Multifunctional multi-window technology • White telecentric transmitted light • Coaxial reflected light • 3D multi-sensor head Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity regulation for adaptation to different materials. Software: • Full version WITHOUT subscription model or maintenance contract • User-friendly, interactive programming • Symbolic representation of the program structure • Multitasking enables parallel measuring and evaluation • Powerful basic editor for customer-specific programs • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit and circumscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness run-out, total flatness run-out • Maximum material condition (MMC) • Up-to-date tolerance tables according to common DIN standards • Software module for creating any factory-specific tolerance tables

Condition: new, Year of construction: 2015, functionality: fully functional, For sale are 2 Renishaw TP20 probe modules. These were purchased new in 2015 as spares, but have never been used. Original packaging and calibration certificates are available, see pictures. Gkjdpexr S E Hsfx Abbsd

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Condition: Used, very good. Technical specifications: Camera system: 2 x 8,000,000 Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Includes computer equipment and USB dongle Software version: 2023 Includes Tritop System (camera, 2x 1m reference scales, license) Gkodjxr Umgjpfx Abbsd All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 950 mm Gsdpfx Abjxn Amaebskd z-travel 1020 mm Control TNC640 B - axis 360 x 0,001 ° feed B-axis max. 50,00 U/min A - axis -185 / +45 x 0,001 ° feed A-axis max. 25,00 U/min feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. size of pallet Ø 770 mm workpiece weight 800 kg interference diameter 900 mm total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, measuring probe Heidenhain TS640, electromechanical tool length check, Swivel axis calibration GSC, collision monitoring "DCM Collision", BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set.

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 350 mm, compressed air connection: 5 bar, Equipment: documentation/manual, lighting, type plate available, Factory-refurbished MAHR Multisensor OMS 600 CNC Including acceptance certificate prior to delivery Technical specifications: Dimensions: 1700x1420x1800mm Weight: approx. 3300kg Measuring range: approx. 600x600x350mm Optical sensor: camera and laser Tactile probe: preconfigured for Renishaw touch probe systems Maximum workpiece weight on glass plate: max. 50kg Maximum traverse speed: 200mm/s Measuring accuracy: E1 (E2) =1.3 + L / 400 µm, E3 = 2.2 + L / 300 µm (L in mm) Compressed air supply: min. supply pressure 6 bar ± 0.1 bar Compressed air consumption: approx. 120Nl/min Power supply: Voltage 230V ± 10% Gjdsdz Szvspfx Abbjkd Included: • CNC control unit • Calibration standard • Full version of OptiCheck3D 2025 software The measuring system was comprehensively refurbished by Profitech (Mahr Competence Center) in 2025 and is being used as a demonstration unit. Additional services: assembly, commissioning, calibration, acceptance, training, hotline support, and after-sales service, as well as complete application support from our service center. Furthermore, the measuring system can be customized directly to your parts spectrum upon request and delivered with ready-to-use measurement programs for immediate access by your operators.

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 20 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, table load: 20 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, High-precision optical measuring device with active vibration damping for use close to production. Complete acceptance before delivery including calibration certificate! Optionally available services: delivery, commissioning, on-site calibration, training, program creation for immediate start of measurements! Factory-refurbished premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agent, worldwide. Online - optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: - delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training programs can also be booked as online courses. Rent-hire purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements Measuring range of individual sensor: 250x200x200mm Measuring range of all sensors: 250x200x200mm Factory overhaul (Mahr Competence Center): 2024 New Windows 10 evaluation station Software: OptiCheck3D Version 4.5 Ultimate Maximum workpiece weight (glass plate): 15kg Scale resolution: 0.1μm Maximum speed: 150mm/s Dimensions: 800x700x1980mm Weight of measuring device: 450kg Weight of control: 90kg High-precision CMOS camera for digital measurements Renishaw TP20 touch probe system with SF insert module Accuracy according to VDI/VDE 2617 Sheet6, ISO 10360-2: U1=1.9 + L/200; U2=2.4 + L/150 Gksdpfjdzzqwox Abbed ####Symbolic image of the manufacturer####

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 2,000 mm, type of input current: AC, total width: 1,000 mm, total length: 800 mm, overall weight: 800 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 400 Multisensor Measuring Device equipped with camera and Renishaw touch probe system Fully functional with factory acceptance before delivery! Comprehensive maintenance history Measuring range: 400x200x200 mm Maximum workpiece weight (glass plate): 15 kg Instrument weight: 800 kg Control cabinet weight: 90 kg External dimensions: 800x1000x2000 mm Maximum traverse speed: 150 mm/s Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measurement length in mm) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt 2025. Includes the latest software update for Windows 10 (Windows 11 upgrade and OptiCheck3D 2025 available as options), including free lifetime software hotline and user support. Optional: Delivery via factory service or forwarding agent, worldwide. Gjdpjw Slafjfx Abbokd Optional: On-site commissioning & calibration Optional: Training service Online and on-site demos available with customer parts, application consulting by accredited Profitech metrology laboratories during project planning. Available complete service: – Delivery, installation, commissioning, acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and education programs also bookable as online courses. Creation of your measuring programs for direct operation with the device is also possible. Rental, lease-purchase, or financing possible directly via Profitech without any financial institution. The measuring device can be individually configured to customer requirements (within the EU). Reference number: 01814-1-ms400 (Please always include this with inquiries)