Used Cable Drum Wood for sale (12,940)

Condition: good (used), Grecon notching system Infeed with cross buffer for packet formation 2 milling machines connected, 600 mm table width each milling machine with glue rollers Godjh I Dufjpfx Abiobw - automatic transfer - continuous press feed - crosscut saw - outfeed roller conveyor with cross transfer Input widths 500 - 4000 mm The system has been dismantled and is available for immediate delivery. The control system is defective; a new control system with program is included. It has not been installed, and the program has not been tested.

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: GER, Technical data: 1 Abus VS column-mounted slewing crane, nominal load 500 KG Maximum load at full outreach: 500 KG / 0.5 tons Gbedpfx Absy Hgnnoiow Height: approx. 3.8 m, under jib: approx. 3.4 m Outreach: approx. 4 m, hook height: approx. 3 m Base plate approx. 60x60 cm Total weight approx. 700 kg Including Abus GM4 chain hoist (year of manufacture 2018) with pendant control (2 lifting speeds) Connection: 400V 16A, slewing range 360° Crane is disassembled and immediately available Article location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping via forwarding agent or collection by appointment

Condition: used, Year of construction: 2006, Bruks drum chipper Model 820CM Year of manufacture: 2006 Gedpfx Aboxr Trnoiobw

Condition: ready for operation (used), functionality: fully functional, power: 78 kW (106.05 HP), fuel type: diesel, Year of construction: 1992, operating hours: 10,027 h, Equipment: cabin, Tire size: 10.00-20 Lifting speed: 66 m/min Operating weight: 22000 kg Load hook: 20000 kg Boom design: upper section 3500 mm / lower section 3500 mm / intermediate section / 3000 mm / intermediate section 1500 mm Basic equipment: with 4-point sliding beam support Engine manufacturer / type / power: Deutz / F6L 912 / 78 kW Max. Load capacity: 25000 kg Extension length: 11500 mm Gsdpfx Aborvgyxjiebw

Condition: used, Year of construction: 1978, machine/vehicle number: NBGMAN 2, Technical data: 1 Abus VS column slewing crane NL 1000 KG Gsdpfxsr Igtke Abiobw Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: used, Year of construction: 2024, New demonstration machine! Particularly heavy-duty design with high dead weight for maximum smooth running • Exceptionally quiet and precise operation thanks to torsion-resistant machine housing • Large cast parallel fence with round bar guide, easy to move • Cast flywheels with rubber coating and cleaning brush • Large grey cast iron saw table, tiltable with ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Door safety switches Gedpfxewggaks Abisbw • Self-braking motor • Two extraction ports Technical data: Table dimensions (L x W x H): 720 x 520 x 860 mm Cutting speed: 1,650 m/min Weight approx. 240 kg Max. cutting height: 350 mm Max. cutting width: 520 mm Max. saw blade length: 4,260 mm Saw blade thickness min./max.: 0.5 / 0.6 mm Precision guides top/bottom Saw table tilt: 0 - 20° Machine dimensions (L x W x H): 870 x 620 x 1970 mm Location in stock:

Condition: excellent (used), mileage: 142,744 km, first registration: 06/2019, fuel type: diesel, axle configuration: 8x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Roof spoiler - Low noise - Speed limiter - Refrigerator - Air suspension - Air horn - Particulate filter - Reversing camera - Sleeper cab - Sun visor - Stability control - Toolbox - PTO (power take-off) - Towing jaw = Further Information = Technical Details Number of cylinders: 6 Gbjdjuxuthspfx Abiew Engine capacity: 12,742 cc Unladen weight: 18,043 kg Transmission Gearbox: OPTICRUISE, automatic Axle Configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Twin wheels Rear axle 2: Lift axle; steering Functional Lifting capacity: 10,000 kg Lifting height: 1,750 cm Crane: HIAB X-HIPRO 362 EP-5, mounted behind the cab Body manufacturer: SAWO CABLE LIFT 326 3W 20 TON Condition Technical condition: very good Visual condition: very good Financial Information Price: On request SCANIA G500 NGS 8X2 + SAWO 3-SIDED CABLE SYSTEM + HIAB X-HIPRO 362 EP-5 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X2 WITH LIFTABLE AND STEERABLE LAST AXLE AIR SUSPENSION WHEELBASE 560 CM CG20N SLEEPER CABIN WITH AIR CONDITIONING, NAVIGATION, FRIDGE, CAMERA AUTOMATIC GEARBOX WITH ENGINE BRAKE TRAILER COUPLING WITH HYDRAULIC CONNECTIONS SAWO 3-SIDED CABLE SYSTEM 20 TONNES NUMEROUS TOOLBOXES HIAB X-HIPRO 362 EP-5 CRANE 5X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5+6 FUNCTIONS ON THE CRANE ROTATOR OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 10,000 KG MAX LIFTING CAPACITY AT 1500 CM: 1,860 KG MAX WORKING HEIGHT: 1,750 CM ONLY 711 OPERATING HOURS!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: new, M&S Gruseck GmbH NEW Screen Drums from the Market Leader – 100% MADE IN GERMANY! Screen drum suitable for a Doppstadt SM620 Gbodpfx Aexnyyksbiow Square staggered perforation (QV) 80mm Sheet thickness = 10mm !!! Over 500 screen drums manufactured per year speak for themselves !!! - High-quality construction! - Always tested! True running in operation! - Best price-performance ratio - Short delivery times! - Stamped perforations for perfect screening results! - Various perforations (square, round, honeycomb, etc.)! - Narrow bridges for optimal screening area! - Various sheet thicknesses available! - Different materials possible (min. S355)! - Special customer requirements are no problem for us – they are our specialty! - All drums are painted! - Large stock selection available! - Suitable for all common screening machines!

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader - 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM718 Square offset perforation (RV) 80mm Sheet thickness = 10mm !!! More than 500 screening drums manufactured per year speak for themselves !!! - Premium quality! - Thoroughly tested! True running in operation! - Best price-performance ratio - Short delivery times! - Precision-punched perforations for perfect screening results! - Various perforation types (square, round, honeycomb, etc.)! - Narrow webs for optimal screening surface! - Different sheet thicknesses! - Various materials available (min. S355)! - Special customer requirements are not a problem for us, but our speciality! - All drums are painted! - Large stock selection! Gbedpfx Abjxnyzuoiew - For all common screening machines!

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GAZ 62 with G-Rotor Factory overhauled, new wear parts Feeding opening: 620 x 820 mm Hopper volume: 0.65 m³ Rotor diameter: 248 mm Rotor working width: 600 mm Rotor speed: 80 rpm Cutting system: spiral rotor; 26 knives, 30 x 30 mm Screen perforation: 10 mm or as required Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Hydraulic motor: 0.75 kW Connection power: 400 V +/- 5% / 50 Hz Suction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Gbjdpox Eb Tmjfx Abiew Including: - Automatic star-delta start - Automatic shut-off in idle mode - Vibration-damping machine feet

Condition: used, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 / Multifire – 99 kW biomass boiler Used Austrian boiler with KWB Comfort 3 controls, output modulation, lambda and negative-pressure control, automatic heat exchanger cleaning and ash extraction. Technical data: - Nominal heat output: 99 kW - Minimum output: 27.6 kW - Fuel input: 113.9 kW - Water capacity: 167 litres - Maximum operating pressure: 3.5 bar - Maximum temperature: 90 degrees C - Weight: approximately 997 kg - Flue connection: 200 mm - Operating hours: 30374 h Gbodezhh Iispfx Abiow Data plate specifies 6 mm wood pellets. Wood chip operation depends on the installed extraction and conveying equipment. Exact equipment and scope of delivery by arrangement. Located in Mosonmagyaróvár, Hungary. Inspection by appointment. Transport, installation and commissioning by the buyer.

Condition: used, Color: Gray Model number: CONTAINER / CABLE - HOOK ATTACHMENT = Company Information = Godpfx Aezz N Ausbiebw ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: good (used), 1 x Coating Drum 4m long. Gbjdpfx Abszz It Sjiow Infeed diameter 750mm. Outfeed 1m

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW Gbodpehwwpzofx Abijw ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x14 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 1446 x 1342 mm ✔ Dimensions L/W/H: 1,92/1,55/1,79 m ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Godpfx Abegw Sxzsijbw Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), 2 double-flap winding units with shaft Diameter 500 mm, length 1650 mm Gbodpfxjgzpbwj Abiow Hydraulic expansion, 150 bar Load capacity 15,000 kg Band width 1500 mm Price 12,000.00 EUR / unit

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm Gbedpfjiq U A Sjx Abiow ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) ✔ Filling opening: 939 x 567 mm ✔ Dimensions L/W/H: 1,88/1,12/1,67 m ✔ Weight: 1250 kg 2 years warranty or 2000 working hours

Condition: good (used), Earth cable for inert gas device, electrode device, stud welding device -Welding cable: Extension / connecting cable for stud welding device -Length: 24 m -Plug: 4-pin Gbjdokx Srxopfx Abisw -Transport dimension: 600/600/H100 mm -Weight: 18 kg

Condition: good (used), The scope of delivery includes: 02x Shelf uprights, used Material color: Sendzimir galvanized Upright profile: 85 x 75 x 2.00 mm Upright height: 1,455 / 1,300 mm Upright depth: 1,100 mm 04x Shelf crossbeams, used Material color: orange Beam profile: 120 x 50 mm Clear span: 2,700 mm 08x Locking pins, used Design: fully galvanized 03x Wire mesh grating, new Material color: Sendzimir galvanized Design: laid-on shelf grating, beveled on both sides Gbedjdvgxijpfx Abiew Depth: (direction of supporting bar) approx. 1,125 mm for upright depth: approx. 1,100 mm Clear span: approx. 965 mm Width: approx. 885 mm Crossbeam support: approx. 65 mm Mesh size: approx. 95 x 45 mm Wire thickness: approx. 4.5 mm Maximum load capacity: up to 800 kg with evenly distributed load 03x Trapezoidal sheet metal, 2nd choice Exterior color: RAL 8012 reddish brown Interior color: similar grey-white Sheet length: 1,500 mm Sheet width: 1,075 mm Cover width: 1,035 mm Profile: 35 / 207 01x Verge angle, new Length: 3,000 mm Material color: RAL 8012 reddish brown Size: 100 x 100 mm Thickness: 0.75 mm Design: 90° bent 25x Screws 5.5 x 40 mm A2 Max. drilling capacity: 13 mm with 16 mm sealing washer, drill tip and ETA-13/0183 approval 06x Screws, 4.8 x 20 mm galvanized, self-tapping for wooden substructure Technical data for the firewood storage: Total width: approx. 2,900 mm Total depth: approx. 1,515 mm Total height: approx. 1,535 mm Storage volume: approx. 3.15 m³ Information: The images are example images to illustrate the construction. The material color of the shown uprights and crossbeams may differ. General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Spotlight drilling machine, drilling fixture Gbsdpfx Aovdc T Nsbiow For drilling holes for lighting fixtures, cable passage holes, and spotlight holes in suspended cabinets, display cases, and carcasses. You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2000, condition: used, Year of manufacture: 2000 Gbedpfxjt Ag Udj Abiew ROTOFLOW 170-N rotary blasting machine from OMSG, featuring an automatic feed tower, manufactured in 2000. Used rotary blasting machine. Continuous belt blasting machine for shot blasting/sandblasting of aluminum die castings, brass or steel forgings, screws, and bolts. Automatic feed tower. Turbine inverter. Special two-position valves. Filter.

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm swing diameter: 800 - 320 mm grinding depth: 380 mm dimensions of grinding wheel: Ø 65 x 25mm (Topfscheibe) mm feed:: 0,05 - 0,40 U/min / 8 step U/min total power requirement: ca. 1,1 kW weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel Gbedpfx Abeu Ngauoijw *

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Gjdeyyzv Topfx Abiobw

Condition: ready for operation (used), Year of construction: 2011, Compact cable recycling machine, specifically designed for processing telecommunications, automotive, electronic, and other cables with small cross-sections. The unit consists of a granulator and a separator for use with copper or aluminum cables. The machine dry-separates the insulation from the metal using an air-vibration table. Manufacturer: I.R.S. ITALIA RECYCLING SYSTEM S.R.L. Gsdps Afpc Tjfx Abiobw Name/Model: KOMBI Type: PLANT Supply voltage: 400 V Year of manufacture: 2011 Power: 22 kW Capacity: 180-220 kg/h Dimensions: 2835x1570x2310 mm Technical condition: used machine, very good condition.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 4,664 h, functionality: fully functional, overall weight: 17,000 kg, total width: 2,550 mm, total length: 11,500 mm, total height: 3,900 mm, transport width: 2,550 mm, transport length: 11,500 mm, transport height: 3,900 mm, year of last overhaul: 2026, rotor diameter: 2,000 mm, Doppstadt SM620 Profi - Year of manufacture: 2012 - Operating hours: 4,664 - Engine: Mercedes-Benz OM904LA – 75 kW / 102 hp - Feed hopper volume: 5 m³ - Drum diameter: 2 m - Drum length: 5.5 m - Screening area: 30.2 m² - Compatible with all screen types - Main discharge conveyor: width 1 m, length 5.5 m - Side discharge conveyor: width 1 m, length 5.5 m - Discharge height: approx. 3.5 m The machine has undergone a complete overhaul; its technical condition is “as new.” Gbedpfs Aarhnjx Abisw AVAILABLE IMMEDIATELY