Used Business Form Machine for sale (110,104)

Condition: new, Year of construction: 2025, MDPE-02 SPOT WELDER 20 kVA High-performance transformer 5 levels of power regulation Cjdpfof Eyu Asx Adxohd Electronic current and time control Possibility to work with 2 x 230V (380V) power supply Bottom sliding handle The range of welded sheets: to 3 + 3 mm Width: 620mm Length: 1100mm Height: 1200mm Weight: 230kg Power supply: 380V / 3phase

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 4138, grinding length: 4,500 mm, grinding width: 400 mm, total height: 2,700 mm, total length: 10,000 mm, total width: 1,800 mm, grinding height: 255 mm, overall weight: 17,500 kg, power: 55 kW (74.78 HP), input voltage: 380 V, Reform AR 45 Type 8 C4138/93 used machine, tested Cjdpjr Izqyofx Adxohd - operating voltage: 380V - frequency: 50 Hz - nominal current: 165 A - max. grinding lenght: 4500 mm - max. grinding width: 400mm - with fixed magnets - clamping surface length: 4500mm - clamping width: 400mm - height over floor: min./max. 787mm - grinding spindle segments: 90x35x200mm - segment head: 560mm dia. - spindle diameter at front bearing: 170mm - feed rate of grinding spindle: 30000 mm/min - the machine consists of 3 clamping magnets - magnet dimensions: 1500x400mm - S5 SPS control - Baumüller servo drives - Marposs measuring system - OP: Lauer PCS 100 - Grinding motor: 55kW

Condition: good (used), operating hours: 21,000 h, functionality: fully functional, FORMCOOK Teflon fryer/cooker. Chodoudk Ucepfx Adxed

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Codpfswud Tkjx Adxshd Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: good (used), Year of construction: 1971, with magnetic table max. grinding length 2500 mm a frequency converter was retrofitted for infinitely variable speed of the grinding motor Chedpfxsmccvae Adxed also a paper filter was retrofitted for filtering the cooling water

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, FORMCOOK CC 418 0833 E ID.NO. 2822 Formcook mod CC 418 0833 E Teflon grill year mod 2008. Can set separate temperatures on all heating plates. Roast length 190 cm. Track width 43 cm. Chedpfeumbqhsx Adxsd Dimensions 330 x 110 cm Height 185 cm.

Condition: new, Year of construction: 2025, MDPE-1 SPOT WELDER portable 1 kVA High-performance transformer 2 levels of power regulation Electronic current and time control Possibility to work with 230V power supply The range of welded sheets: to 1 + 1 mm Chedpfx Aef Eyvvsdxed Width: 110mm Length: 460mm Height: 300mm Weight: 12,5kg Power supply: 230V

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 4653, grinding length: 4,500 mm, grinding width: 400 mm, total height: 2,700 mm, total length: 10,000 mm, total width: 1,800 mm, grinding height: 255 mm, grinding spindle motor power: 55,000 W, input voltage: 380 V, fabrication no.: 4653/91 - operating voltage: 380 V - frequency: 50 Hz - nominal current: 165 A - Max. grinding length: 4500 mm - Max. grinding width: 400 mm - Max. working height: 255 mm - with fixed magnets - clamping surface length: 4500 mm - clamping width: 400 mm - height over floor: min./max. 787 mm - grinding spindle segments: 90 x 35 x 200 mm - segment head: 560 mm diameter - spindle diameter at front bearing: 170 mm - feed rate of grinding spindle: 30000 mm/min - the machine consists of 3 clamping magnets - magnet dimensions: 1500 x 400 mm Technical attributes dimensions (l x w x h) approx. Chjdpfx Adjr Izqcexsd 10000 x 1800 x 2700 mm weight approx. 17500 kg year of construction 1991

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: F.24442.03.03, Unique opportunity for serial manufacturers We are offering you here an immediately available, top thermoforming linear system with automatic tool change, rotary table, powerful lower table with spindle drive, tool change station, maintenance platform, hotmelt extraction, heating enclosure, and many other special functions directly from the manufacturer FRIMO. The system was most recently used for the production of automotive door panels. The film itself was coated with hotmelt. The system can also be used for dispersion adhesives (adhesive on the carrier parts). Very large components are possible, forming area up to 800 x 2,000 mm. The maximum forming part height is 250 mm. Very fast cycle times of under 60 seconds are easily possible. The system was regularly maintained and was in operation up to its dismantling. Currently, the system is properly stored at our facility in Hungary. We have locations worldwide and can assist you directly at your site. Cedpowpd Rrsfx Adxjhd We can deliver this system worldwide as needed, install it at your factory, train your personnel, and advise you in all technical matters. Any modifications and modernization are also possible. Just ask us with your individual project request!

Condition: good (used), Year of construction: 2019, Throughfeed CNC machine FELDER GROUP FORMAT4 CREATOR 950 (year 2019) with glue and dowel insertion, 12 kW HSK-F63 milling unit, integrated Ø 120 mm saw, dowel unit, and feed speeds up to 90 m/min represents a compact solution for precise milling, drilling, and panel sizing of wood. Key Technical Advantages - Occupies only 5 m² of space Ideal for workshops with limited space. - Easy clamping and programming Fast and intuitive operation, even for less experienced users. - Compact, powerful, and fast Perfect for smaller workshops seeking professional results. Advanced Features - Glue and dowel insertion unit - 12 kW milling unit (up to 24,000 rpm) - Automatic workpiece length measurement - Automatic tool changer (linear tool magazine with 4 positions) - Drilling from all five sides - Groove cutting with integrated saw blade - Processing from all four sides of the workpiece - Door panel machining Drive Unit - Spindle: HSK F63 - Number of axes: 3 Travel Distances - X-axis travel: 3000 mm - Y-axis travel: 950 mm - Z-axis travel: 80 mm Tools - Maximum tool weight: 7.5 kg Worktable - Table load capacity: 130 kg Additional Equipment - Online remote service support package - Automatic central lubrication Csdpfx Adjwyvgaoxehd PRICE EXCLUDES VAT.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 200.12.010.13, year of last overhaul: 2024, Machine can be collected from April. Machine is still in operation and can be inspected during operation. Technical data: Chedpfx Astvfihodxsd Control unit with 10.4" touch color screen Extendable workpiece support motorized positioning-controlled pressure beam chain feed with 12m/min feed speed roller support plate d=760mm 2 motorized joint trimming unit Edge feed for roll and strip material 0.4 - 5mm 2 replacement gluing units for EVA 1 replacement gluing unit for PU Motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit 2 motorized multifunctional units for radius, flush and chamfer trimming Corner processing unit Radius scraper 2 motorized polishing unit (buffing) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit

Condition: new, Year of construction: 2025, FORMA Z folding machine is the most flexible and diverse sheet metal folding machine in our portfolio. Folding both up and down, FORMA Z folding machine eliminates the need to flip material, providing time-efficient folding of complex parts using one operator. The Combi beam rotation between two tooling set ups and the unique geometry gives you unrivalled working space. The automatic tool locking is fast and has features making tool changing very ergonomical. The folding beam has automatic crowning, automatic folding center adjustment and automatic sheet thickness adjustment, which provides superior folding quality in all thicknesses and across the folding length. The large number of vacuum grippers holds the part steadily, anywhere on the back gauge. Large blanks as well as small, one as well as several. The back gauge comes in many designs, which gives you great freedom of choice in how you would like to operate the machine and manage the flow of blanks and parts to/from the machine. Last, but not least – FORMA Z is fast: more production in less time for you! - CNC controlled crowning of folding beam - CNC folder that folds upward and downward, no need to flip the material. - 150 mm movement of folding beam, to move outside of material on folding side. - The Combi beam comes equipped with 203 mm (8”) High Divided Tools and straight rail. Chedpfxemhhn Ee Adxed - Comes as standard with multifold tooling, CNC controlled sheet thickness and folding center adjustment. - The folding beam can be used as front gauge up to 150 mm. - Add vacuum grippers to make work lighter, more precise, and automated!

Year of construction: 2025, condition: new, KDT-03 Trimming Machine 380V Chodpfx Aefwmvhjdxod Grooving machine – 380V powered electric grooving machine, equipped with a foot pedal with an emergency switch, has a retractable lower shaft. Includes 6 sets stones shown in the picture. Easy and convenient machine operation. Technical specifications Range of processed sheet metal: 1.2 mm Roller diameter: 62mm Dimensions length height: 900x450x1350 (mm) Weight: 135kg

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4655, grinding length: 5,000 mm, grinding width: 500 mm, Sanding length: 5000 mm Sanding width: 500 mm Workpiece height: 250 mm spindle diameter in front bearing: 190.5 mm Chsdsq U Ihvspfx Adxed pivotable 0.7° Max. Torque: 1771 Nm Max. speed: 593 min/-1 Feed: infinitely variable 20-35,000 mm/min Trapezoidal segment head diameter 800 mm with Trapezsegmenten: 94/103x38x200mm Marposs measuring device Hydraulic upper part clamping and swiveling Sanding mist extraction system: Hydrocyclone cleaning system Machine weight approx. 27.6 tons Space requirement approx.: 11.2 x 4.3 x 3 m

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 1008, Equipment: documentation/manual, type plate available, device for gluing cardboard trays using hot melt glue from a Nordson glue applicator, suitable for gluing and folding trays of various sizes Csdew Ekl Iopfx Adxjhd

Condition: good (used), Year of construction: 1995, In good technical condition and fully functional. A special machine for grinding involute splines on shafts and hubs. Built in 1995. SIEMENS Sinumerik control system. Maximum workpiece diameter: 1200 mm Chsdpfxjwcxd Ts Adxjd Maximum workpiece length: 1000 mm Maximum workpiece weight: 300 kg Spindle speed range: 100 – 1000 rpm Motor power: 7.5 kW Machine dimensions: length 2500 mm, width 1500 mm, height 1800 mm Weight approx. 4 tons.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 9440029, measuring range X-axis: 6,000 mm, measuring range Y-axis: 6,000 mm, measuring range Z-axis: 6,000 mm, workpiece weight (max.): 10,000 kg, type of input current: AC, Package for 3d Measurements: Chedpfoq U Ag Isx Adxod - HandyPROBE Next™| Elite ( CTrack w/ serial no.: 9420125, HandyProbe w/ serial no.: 9440029) - MAXSHOT Next Elite - VxInspect (full) - Accuracy(1) - 0.025 mm (0.0009 in) Volumetric accuracy(1) : - 9.1 m3 (320 ft3) - 0.064 mm (0.0025 in) - 16.6 m3 (586 ft3) - 0.078 mm (0.0031 in) Volumetric accuracy (with MaxSHOT Next™| Elite) - 0.044 mm + 0.015 mm/m (0.0017 in + 0.00018 in/ft) Part size range (recommended) - 0.2–6 m (0.7–20 ft) Weight - Probe: 0.5 kg (1.1 lb) - C-Track: 5.7 kg (12.5 lb) Dimensions (LxWxH) - Probe: 68 x 157 x 340 mm (2.7 x 6.2 x 13.4 in) - C-Track: 1031 x 181 x 148 mm (40.6 x 7.1 x 5.8 in)

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: SRS CW 2000 2025/1, control type: manual, degree of automation: semi-automatic, actuation type: electric, laser source manufacturer: Raycus / JPT, laser power: 2,000 W, laser wavelength: 1,080 nm, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: AC, type of cooling: water, compressed air connection: 5 bar, overall weight: 175 kg, warranty duration: 36 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer equipment for cleaning and processing the surfaces of metal, wood, and stone. Delivery is available within Germany and Austria. As a service provider in the field of surface processing, we can supply you with machines that meet your requirements! Transport costs: dependent on your location and delivery terms Delivery: 4 working weeks after receipt of payment via air freight - Air freight approx. 2 weeks The machine is NEW and will be configured and adjusted according to customer specifications! Configuration and price depend on the customer’s requirements and application area. We offer professional training in the operation of the equipment in accordance with UAVA / UVV regulations in Austria and Germany. As we use these systems ourselves as a service provider, we can also guarantee that they function properly. We offer comprehensive instruction on-site or at our workshops, as well as customer-oriented demonstrations. Payment options: RENT / LEASE / PURCHASE Technical Specifications: Model: RST-FLC-2000W 2025 Laser: Fiber Laser (Raycus & Raytools) Laser power: 1000W / 2000W / 3000W (or Pulse Laser: 100W to 1000W) Laser wavelength: 1064 nm or 1080 nm ±5 Frequency: 10-50 kHz Cooling: Air or water cooling Net weight: approx. 170 kg Dimensions: 98 × 122 × 143 cm Scan width: 5–50 cm Functions: Hand-held or automatic Operating temperature: 0–40°C Operating mode: CW (continuous wave) Wavelength: 1025–1070 nm Standard output power: 15 kW Laser beam quality: 4 mm*mrad Adjustable frequency: 400–50000 Hz Transmission fiber diameter: 50/100 Output power stability: ±2% Power supply: 250 V / 16 A Operating temperature: 5–35°C GUARANTEED at the lowest PRICE!!! – RENT / LEASE / PURCHASE All machines are assembled and delivered exclusively tailored to your requirements and based on our expertise. - Demonstration - 24-hour support - Including maintenance, service, and repairs We additionally offer: Chsdotxlyrjpfx Adxjd INDIVIDUAL training in accordance with the UAVA / UVA safety regulations for commissioning laser machines for surface processing. Safety consulting support in accordance with workplace and laser equipment safety requirements. Regular inspections of safety regulations in compliance with current standards.

Year of construction: 2025, condition: new, The Round Elbow Machine is designed for quick assembly of air ducts, namely segments of bends, transitions, and plugs. High quality hydraulic components have been used. Flanging and assembly operations are carried out at 2 independent workstations, and it allows two people work at the same time. T wisting and printing balls high abrasion resistance and toughness with high durability and compressive strength is 2379 cold work tool steel. Technical Data: Diameter Range-125-1250mm Sheet Metal Thickness-0,5-1,5mm Roll forming Options-5-7,5-10mm 3 Set Power-4 kw Electricity-380V/3PH/50 HZ & 240V/3PH/60 HZ Air Pressure-6-8 bar Hydraulic Oil Level-90 lt Processed Sheet Metal Thickness (Coated)-0,5-1,5 Codpfx Adjg S N Nisxshd Machine Dimensions-750(width)x900(height)x2800(length) Machine Weight-850 kg

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Surface grinding machine Year of manufacture: 1990 Grinding length: 5100mm Grinding width: 250mm Workpiece height: 220mm Total power requirement: 36kW Used water system Lifting station, magnetic roller, pump Chjdstqtk Aopfx Adxed

Year of construction: 2025, condition: new, SPIRAL PIPE MACHINE Metformer MTR1500 is intended for the production of round ducts of the SPIRO type. The produced channel complies with the DIN EN 12237, BS and Eurovent standards. Cedpfx Adop T Smloxehd Device for uncoiling a sheet of metal strip with a vertically adjustable brake Forming strips for the production of pipes Fast, burr-free cutting thanks to circular cutting knives Control from the LCD touch screen Essential Automatic Lubrication System Automatic angle control automatic shear during pipe production Remote access and control Reporting system (production quantity daily-weekly-monthly) Automatic error detection, Engine power 10.5 kW (smooth regulation) ELECTRICITY 380V / 3PH 50 / 60HZ AIR PRESSURE 6-8 BAR HYDRAULIC OIL AMOUNT 10L + 6L CALCULATED SHEET THICKNESS (GALVANIZED) 0.5-1.2 CALCULATED SHEET THICKNESS (CHROME) 0.4-0.7 DIAMETER RANGE 100-1250 MM PLATE WIDTH TO USE 137MM PRODUCT SIZE 250MM-3000MM (option 6000MM) MACHINE DIMENSIONS 1600 (W) 2400 (HEIGHT) X3050 (Length) COFFEE TABLE 3Mx 1 pcs. (OPTION 3Mx2 pcs.) MACHINE WEIGHT 1950kg STANDARD DIMENSIONS: Ø125, Ø150, Ø160, Ø180, Ø200, Ø224, Ø250, Ø280, Ø300, Ø315, Ø350, Ø400, Ø450, Ø500, Ø560, Ø600, Ø630, Ø700, Ø710, Ø1125.1000, Ø900 Ø1250

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4656, grinding length: 4,100 mm, grinding width: 200 mm, Reform AR41 Type 7 C4656/91 Year of manufacture: 1991 Grinding length: 4100mm Grinding width: 200mm Workpiece height: 190mm Table clamping area: 4169x202mm Segment head diameter: 250mm Spindle diameter in the front. Bearing: 45mm Swivelling: 2° Max. torque: 2x45.8Nm 2x grinding motor 7.5kW Feed: 2000-35000 mm/min Chedpfx Astqtppsdxed Max. speed: 1460 min/-1 Total power requirement: 30 kW Heidenhain digital display Additional grinding device ZS 7.5kW Swivelling clamping table via swivel gear Paper belt filter cleaning including pumps Central lubrication system Machine weight approx. 8.2t Space requirement approx. 9.5x2.6x2m

Condition: new, Year of construction: 2025, SPIRAL DUCT PRODUCTION MACHINE Metformer MTF 1602 TUBEFORMER Designed for the production of round SPIRO-type ducts. The produced duct complies with DIN EN 12237, BS, and Eurovent standards. Features: Chjdpswa Skhsfx Adxed Coil decoiler with vertically adjustable brake Forming strips for duct production Burr-free high-speed cutting with circular cutting blades LCD touchscreen control Automatic lubrication system Automatic cutting during duct production Production reporting system (daily-weekly-monthly output) Automatic error detection Technical Data: Diameter range: 80–1600 mm Thickness range: Galvanized steel: 0.4–1.2 mm Stainless steel: 0.4–0.7 mm Aluminum: 0.4–1.3 mm Strip width: For 0.4–1.0 mm thickness: 137 mm For 1.1–1.3 mm thickness: 140 mm Production speed: 60 m/min Motor power: 11.25 kW Beading: Smooth, single or double Lock: External lock Cutting system: Circular cutting system Weight: 2900 kg Machine dimensions: 1900 × 2050 × 1500 mm Decoiler dimensions: 1780 × 1130 × 1250 mm Table dimensions: up to 2700 × 950 × 1200 mm Operating Environment: Power supply: 3-phase, 380V, 50Hz Clean surroundings Maximum ambient temperature: 40°C Minimum ambient temperature: -5°C Humidity: 55–85% Altitude:

Condition: new, Year of construction: 2025, working width: 2,500 mm, bending angle (max.): 125 °, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 1,600 kg, total length: 30,000 mm, power: 4 kW (5.44 HP), height adjustment type: hydraulic, stroke length: 270 mm, features Chodsq Apduspfx Adxed Bending capacity of 2500 mm x 2 mm NC-89 digital programmable single angle control for angles from 0-125º Automatic cycle: after clamping, the lower bar bends to the set angle and returns, the head releases to the set position Szybka akcja szybka regulacja głowicy w celu zoptymalizowania promienia gięcia na grubości materiału 0,5-2 mm Durable construction made of steel Convertible foot pedal includes control panel for maximum flexibility High-quality components ensure reliable performance for years of continuous operation NC-89 opening height adjustment NC-89 stop clock control ensures constant bending angle Extended fingers allow bending pans or boxes to a depth of 205 mm Includes adjustable rear hand bumper, also adjustable for tapered material Mild steel performance is evaluated on hot rolled material with 250 MPA MODEL HZM 2×2500 Type of controller NC-89 Single program (mm) Bending length 2500 (mm) Mild steel bending 2 (mm) Stainless steel bending 1) Type of material attachment Hydraulic clamp Type of material bending hydrauliczne Bend angle indicator 0-125º (mm) Bumper stroke 1000 (kW / hp) Engine 2,2 / 3 (V) Voltage 230 (cm) Shipping dimensions (L x W x H) 300 x 81 x 150 (kg) Net weight 1600

Condition: new, Year of construction: 2025, PLA-65A PLASMA CUTTER The machine, which is able to make fast, precise and high-quality cuts up to 25 mm, was specially developed for manufacturers of ventilation ducts, advertisers and customers using thin sheets. Together with the economic price, this machine CNC plasma cutting machines equipped with ergonomic functions have become an indispensable helper for customers in this matter industry. Technical data: Hypertherm Powermax plasma source Power: 65A Max power consumption 11 kw Speed m / min 20 X / Y / Z 1500 3000 150 working area Weight: 1000 kg Loudness: 69 dB (A) Dimensions: Length: 3700 mm Cjdpfx Aofwmrpsdxshd Width: 2200 mm Height: 1300 mm Equipment: Source - power hypertherm max 65A Controler CNC +THC PC computer