Used Bupi Cleaner for sale (791)

Condition: excellent (used), Year of construction: 2012, operating hours: 838 h, functionality: fully functional, overall weight: 268 kg, load capacity: 3 kg, arm reach: 1,434 mm, controller manufacturer: Yaskawa, controller model: DX100, teach pendant manufacturer: Yaskawa, repeat accuracy: 0.08 mm, Equipment: documentation/manual, Yaskawa MA1400 + HP20D robot system – only 838 servo operating hours Two robots, coordinated operation, flexible welding capabilities. For sale: a Yaskawa robot system in very good condition, tested and fully operational, for arc welding and material handling applications. The system includes a DX100 controller, a Fronius TransSteel 5000 welding power source, an automatic torch cleaner, and a well-equipped Siegmund welding table with a plasma-nitrided surface. Master-Slave control – Jigless welding Dksdpfsz Rn Igox Acyew The two robots can work synchronously: the HP20D, with a payload capacity of 20 kg, holds and rotates the workpiece in front of the MA1400 welding robot. For small parts, a pneumatic gripper allows complex welding operations without a separate workpiece positioner. The robot has exceptionally low operating hours: only 838 hours of servo operation time. Main components of the system: • 1 x Yaskawa MA1400 arc welding robot arm • 1 x Yaskawa HP20D material handling robot arm, with a 20 kg payload capacity • Yaskawa DX100 controller with Master-Slave function • 1 x Fronius TransSteel 5000 arc welding power source • 1 x Yaskawa TCS-C automatic torch cleaning unit • 1 x Siegmund S16 welding table, 1500 × 1000 mm, with aluminum frame, height-adjustable legs, and plasma-nitrided steel tabletop. Accessories: 4 screw clamps, 8 quick-release bolts, 4 aluminum stops, and 4 aluminum squares. Part number: 2-WS161510.1 • 1 x Siegmund S16 Basic #2 clamping kit: 10 stops, 10 squares, 16 fastening bolts, 8 clamps, and a 6-piece accessory and maintenance kit. Part number: 4-161300 The equipment can be viewed by prior arrangement. Price: net 55,000 EUR.

Condition: used, Bosch Scara SR 800 Swivel-Arm Robot Manufacturer: Bosch Order No. 384291811 Serial No. 54400094 Maximum load at the gripper flange: 5 kg Stroke of the 3rd axis: 480 mm Pneumatic pressure: 4-8 bar Weight: 100 kg Swivel range: see diagram Mounted on an aluminum profile base frame. Djdpfx Acohtyznjyskw Item condition: used These robots were all used as backup machines in the warehouse of a large automotive supplier and are therefore in very good condition. In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, tool carts, tools, and forklifts are plentiful. In total, 24,000 m² of production space will be dismantled and sold. Please also note our other offers. After purchase, the amount is due within 7 working days. You can find more items – new and used – in our shop! International shipping costs upon request!

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 821301-10002, Equipment / Additional information: Hardware • OptiPrint™ media cleaner • Powered roll feed system with media flanges • Powered roll up system with media flanges • Baskets • Rear and Front Media sensor • Hard-Disk (2 GB job storage space) Interface • 8-key control panel. • 4x20-character liquid crystal display. • English Display language. • Metric or English units. Functionality • 16 user configurations. • Auto Alignment system. • Up to eight colors/job • OptiTrac Ribbon save • Right side of band • OptiTrac colors : Mirror silver and Gold Cutting: • Concatenation and curve smoothing to obtain better cut quality. Dksdpfx Aehu Sawjcysw • OptiCut drag-movement optimization. • Overcut for easy weeding. • Multiple reprint feature (up to 999). • Flash Eproms With 5 cassettes and various color ribbons Operation manual

Condition: good (used), Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from Gansow scrubber-dryer -Voltage: 24 V Dededwdrgopfx Acyokw -Quantity: 29x available -Price: per piece -Dimensions: Ø 145/H175 mm -Weight: 2.3 kg/pc.

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: Dodpfxjvuw R Rj Acyskw - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: used, TECHNICAL DETAILS - number of discs : 3 - discs rotation speed : 300 - 3000 [Rpm] - number of clearance per disc : 1 - 24 - slide orientation : 0-90 [°] Djdpfeug U Ekox Acyekw - disc feed (Micrometric adjustment) : about 3 [mm] - slow feed : 3 [mm] (adjustable) - power supply : 3 x 380 [V] / 50 [Hz] - size (cover closed WxLxH) : 1200 x 840 x 1930 [mm] - weight : 500 [kg] EQUIPMENT - air cleaner ELBARON RON/60 SV (2004)

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, ITEC & Bobet Hygiene Gateways – Components – Custom Configurations Available from Stock. Dodpfsy N T Rhox Acyekw Complete solutions without the costs and long lead times of new equipment. HUVANTIS exclusively offers premium, tested hygiene infrastructure from stock clearance by industry leaders ITEC and Bobet Matériel. Why HUVANTIS? Significant Savings: A single ITEC turnstile with disinfection system currently sells for over €8,000 (new price). We offer complete systems at a fraction of this price. Immediately Available: No months-long delivery times. Available directly from stock in Büllingen (BE) / Auw (DE). Planning Included: We don’t just supply hardware. We also offer CAD-based planning for your hygiene passage (personnel flow analysis, black/white zone separation). CURRENTLY AVAILABLE CONFIGURATIONS: 1. Modular ITEC System (Configuration 1): ITEC continuous sole cleaner with turnstile Separate ITEC hand disinfection station with rotary gate ITEC touchless hand wash basin, soap dispenser & hand dryer Stainless steel guidance system (barriers & guides) Price: €3,150 net (plus VAT) 2. Compact Bobet Combo System (Configuration 2): Bobet continuous sole cleaner with integrated disinfection & turnstile ITEC hand wash basin (2 touchless taps) ITEC soap dispenser & hand dryer Stainless steel guidance system Price: €2,850 net (plus VAT) ADDITIONAL SERVICE: Custom CAD planning & consultation for your site: €800 flat fee. LOGISTICS & TERMS: Location: B-4760 Büllingen (BE) / D-54597 Auw (DE) Shipping: Europe-wide delivery by freight forwarding available on request Invoice: Official invoice with separate VAT (BE-VAT) Condition: Used, technically inspected, sold “as is” A detailed 4-page dossier with technical drawings and a list of individual components is immediately available as a PDF upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC1500 Cyclone Dust Collector – Professional Dust and Wood Chip Extraction System The CORMAK DC1500 cyclone dust collector is a high-performance extraction system designed for efficient removal of wood chips, sawdust, and fine dust generated during woodworking and industrial production. Featuring a cyclone separator combined with a dual-stage filtration system, the DC1500 effectively separates coarse and fine particles, ensuring cleaner air, improved workplace safety, and extended filter life. It is suitable for both dry and damp materials, making it a versatile solution for demanding workshop environments. Key advantages Dual-stage filtration system – efficiently separates coarse chips and fine dust particles. Cyclone separator – provides highly effective pre-separation of sawdust and debris before filtration. High-performance centrifugal fan – delivers strong suction with quiet operation. Remote control operation – convenient wireless control for improved operator comfort. Compact design – fits easily into workshops with limited floor space. Heavy-duty steel collection container – durable construction for long service life. Mobile design – four heavy-duty caster wheels allow easy transport around the workshop. Construction and technology The CORMAK DC1500 is equipped with an advanced cyclone separator and an integrated dust filter, significantly improving filtration efficiency while reducing filter maintenance. High-quality seals in critical areas minimize pressure losses and maximize suction performance. An integrated vacuum pressure gauge allows continuous monitoring of system performance, while the dynamically balanced centrifugal fan ensures reliable, uninterrupted operation. Precision and performance With an extraction capacity of up to 3,200 m³/h, the DC1500 ranks among the most efficient dust collection systems in its class. Its 1.5 kW motor provides powerful suction while maintaining low energy consumption, making it an economical solution for continuous industrial use. Applications The CORMAK DC1500 cyclone dust collector is ideal for: woodworking workshops furniture manufacturing facilities wood, plastic, and metal processing plants central dust extraction systems professional craft and production workshops It efficiently removes both dry and damp sawdust, wood chips, and fine production dust, helping maintain a clean and safe working environment. Standard equipment Remote control Cyclone separator High-efficiency dust filter Heavy-duty steel collection container Mobile base with four caster wheels Vacuum pressure gauge Optional equipment Flexible suction hoses Hose diameter reducers and adapters Additional HEPA filter kits Technical specifications Parameter Value Airflow capacity 3,200 m³/h Maximum vacuum 2,040 Pa Djdpfxevuzvke Acyekw Noise level 70 dB Motor speed 2,850 rpm Suction inlet 3 × 100 mm / 1 × 150 mm Collection containers 2 Motor power 1.5 kW / 230 V Overall dimensions 1250 × 650 × 1720 mm Weight 100 kg

Condition: excellent (used), CNC Flexible FULL Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Dodpjzxc Ncsfx Acyekw Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1000042371, functionality: fully functional, Biesse Akron 1130 J Machine Number 1000042371 Year of Construction 2020 Panel height mm 8 - 50 PVC/ABS mm 0.4 - 3 Multi-Velocity Kit 9 m/min Adjustable working height Variable inlet guide Side roller with idle wheels for panel support RT01 grinding group Coiling plate Infrared lamp to heat the edge SP01 hot-melt adhesive bonding group Edge pressure group on straight profiles with pressure rollers IT01 tilting adjustment unit Dkjdps Ahuqpjfx Acyow RF01 2-axis tilting motor group AR01 multifunction rounded-edge group (edge trimmer + deburrer) RB01 edge scraper group RC01 glue scraper group SZ01 brush group ADZ01 anti-adhesive spray group Electrical and mechanical predisposition for PUR adhesive system Pro-Nesting Kit LPT01 cleaner liquid nozzle spray group

Condition: excellent (used), functionality: fully functional, Complete machinery set for sale, consisting of: Holzher machinery in new condition (in operation since 06/2024), including: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12x18m) Nextec 7705 nesting machining center Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009) including waste conveyor belt (new, in operation since 06/2024) Nestro dust extraction system (in operation since 06/2024), including: filter tower 11 kW + 7.5 kW (15,000 m³/h) briquette press shredder piping for all machines, various pipe diameters Mobile dust extraction unit Holzkraft RLA160 2x mobile dust extraction units ASA2553 or similar 2x Renner compressors, 7.5 kW each (1 of which is new and has been in operation since 06/2024) 1x Ayen multi-spindle drilling machine, special design with 2.5m stop gauge Dkjdpfx Aezh Hw Ascyow 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014) 2x electric high-lift pallet trucks Toyota/BT (year of manufacture) 3x electric high-lift pallet trucks Cesab including initial lift (year of manufacture 2025) Various workbenches, templates, pallet racking, material carts, etc. BeA various nailers and staplers Various electric power tools, vacuum cleaners from Festool, Bosch Prof., etc. Bench drill Stürmer Festool table saw Bosch large panel miter saw on stand EUR 460,000,- net (Total price EXW (ex works) for self-dismantling/collection) If you are seriously interested, we would be happy to provide pictures and details of the individual items.

Year of construction: 2026, condition: new, functionality: fully functional, Double head sawing machine with 5 controlled axes for compound angles FOM INDUSTRIE KEOPE E5 6,6m Year: 2026 Condition: new (showroom machine) Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices Dsdpfoztr Rrsx Acyskw ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, empty load weight: 168 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 10/20-4M HOT WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400V ~ 3-phase Flow rate (l/h): 500 – 1000 Dkodpfx Ao Ah Siqjcyow Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Cleaning agent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H, mm): 1330 x 750 x 1060 EQUIPMENT: NEW heavy-duty high-pressure spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA-style quick-connect couplings – INCLUDED (FREE) KEY FEATURES: Open oil system – no operating time restrictions Two built-in chemical tanks allow for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for water-softening agent (RM110) prevents corrosion and limescale buildup within the heating coil and other internal plumbing. An exhaust gas temperature sensor shuts off the engine if the temperature exceeds 300°C. When the eco!efficiency mode is activated, the unit heats the water to 60°C, which allows for effective cleaning—even of heavy soiling—while simultaneously reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 200 bar, empty load weight: 195 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 13/20-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 200 bar and 1300 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 13/20-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1300 Working pressure (bar) 30 - 200 Max. Water heating temperature (°C) 80-155 Connection power (kW) 9.3 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 195 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Dksdpfxszc Emmo Acyow Open oil system - no operating time limit Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 695 M Eco HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 800 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the pictures. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 800 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 85–155 Connected load [kW]: 5.9 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced, steel-braided high-pressure hose (10 m) Dkedpe Ah R Ukefx Acysw NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and easy to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal lines.

Year of construction: 2025, condition: new, We manufacture new row cleaners according to customer requirements. Dksdpfx Aoxrcyhocyew

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, empty load weight: 49 kg, input voltage: 230 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 6/16-4M COLD WATER PRESSURE WASHER This device features new accessories, including a pressure gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient single-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 600 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. Dedpey S S Nzefx Acyjkw TECHNICAL DATA: Model: HD 6/16-4M Power supply voltage [V]: 230 Discharge capacity [l/h]: 600 Operating pressure [bar]: 160 Connection power [kW]: 3.4 Weight [kg]: 49 Dimensions [mm]: 467 x 407 x 1010 Hose [m]: 10 EQUIPMENT: NEW durable pressure gun NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, Year of construction: 1997, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: 96108, total length: 3,000 mm, total width: 2,500 mm, total height: 2,800 mm, overall weight: 3,000 kg, water consumption per time unit: 10 l/min, inner diameter: 1,400 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 5 bar, compressed air connection: 5 bar, reception height: 1,000 mm, input current: 50 A, injection pressure: 4 bar, temperature: 50 °C, heating capacity: 30 kW (40.79 HP), power: 37 kW (50.31 HP), load capacity: 80 kg, operating pressure: 4 bar, empty load weight: 2,000 kg, Equipment: documentation/manual, Offered for sale is a spray cleaning system with an aqueous cleaner, featuring a two-stage spray cleaning process with a spray pressure of 4 bar. The basket is rotated or pivoted. Basket dimensions: L x W x H 815 x 565 x 525 mm. Throughput: approximately 4 baskets/hour. Fluid capacities: Washing 350 liters / Rinsing 250 liters. Heating capacity: Washing 18 kW, Rinsing 12 kW. Djdps Ah Hl Uefx Acyekw Program sequence controlled by a PLC. Exhaust air for fume extraction: approximately 500 m3/h. Accessories: 240 liters of liquid cleaner + 30 liters of rust protection.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 308S5052, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 28 m/min, feed rate Y-axis: 28 m/min, feed rate Z-axis: 28 m/min, controller model: Siemens Sinumerik 840 D, workpiece height (max.): 1,750 mm, workpiece diameter (max.): 2,550 mm, table load: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 237, Equipment: chip conveyor, documentation/manual, For sale: Mandelli Storn 2500 horizontal machining center. Year of manufacture: 2007 Serial number: 308S5052 Technical condition: The machine is in working order; used. Table dimensions: 1000 x 1250 [mm], travels in X/Y/Z axes: 2600/1500/1800 [mm] Table load capacity: 4500 kg Control system type: Siemens – Sinumerik 840 D Spindle: HSK 100; spindle power: 30 kW; spindle speed: 8000 rpm Axis positioning accuracy: 0.01 [mm] – axis measuring system: optical scales Axis travel speed (rapid traverse): 28,000 mm/min Cooling type: tool cooling – none; spindle cooling – yes Cutting fluid – yes – external/internal through the spindle (25 bar) Number of axes: 4-axis Drive type: servo drives Machining range: diameter: 2550 mm; height: 1750 mm Additional equipment Tool magazine: number of positions: 237 Maximum tool length: L = 600 mm; Maximum tool weight: 35 kg Material feeding system: loading station at the pallet magazine Palletizing system – 4 pallets and 1 pallet loading station and 1 machine table – a total of 6 pallets Chip conveyor system – yes Cooling system – control cabinet air conditioning: yes; spindle cooling: yes Part measuring probe – none; tool breakage detection system – yes Centralized extraction system (vacuum cleaner) for cleaning parts from chips and cutting fluid residue – yes Operating manual – paper version in German, digital version in German. Dksdpfs Ahpmfex Acysw The buyer is responsible for arranging the container, packaging, and transportation company.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, USED SANDBLASTING SYSTEM consisting of: 1 blasting hose with blasting nozzle and manual operation (approx. 6-8m long) Part 1 Serial number: none 1 protective suit with protective helmet and fresh air connection Part 2 Serial number: none 1 electrical control panel (control for dust extraction and blasting media cleaning) Part 3 Serial number: Manufacturer SBE-Schrader Bergbau Elektrik 1 dust extraction unit 5,700 m³/h - 7.5 kW with suction hose Part 4 Serial number: 3472810011001 Year of manufacture: 07.2006 1 blasting media cartridge filter 1,800 m³/h - 2.2 kW with suction hose Part 5 Dksdpfx Ae Ah Tcfocyew Serial number: 973010 Year of manufacture: 07.2006 1 blasting media container (cyclone cleaner) with various suction hoses Part 6 Serial number: 45695 Year: 2007 1 fresh air filter for protective suit and protective helmet Part 7 Serial number: none 1 screw compressor Kaeser ASD37 1 pressure vessel for blasting compressed air - 3000 liters 1 compressed air dryer - Kaeser TD61

Condition: new, operating pressure: 210 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, overall weight: 160 kg, warranty duration: 24 months, temperature: 155 °C, TECHNICAL DATA OF THE KARCHER HDS 10/21-4MXA eB WASHER: Model: HDS 10/21-4MXA eB Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Power cable (m): 5 Weight (kg): 173 Dimensions (L x W x H) (mm): 1330 x 750 x 1210 EQUIPMENT OF THE KARCHER HDS 10/21-4 MXA eB WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 315BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 20m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock ECO!BOOSTER TR 033 wide-stream nozzle. !EasyLock Dsdpfx Acsy E Nployskw Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) The set is equipped with an integrated, automatic pressure hose reel that significantly improves work comfort Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. A standard EASY!Force Advance high-pressure gun with a rotating lance, a 20m high-pressure hose on the reel, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: SIEMENS, controller model: 840D - Powerline, total height: 3,000 mm, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, swivel angle A-axis (min.): -109 °, swivel angle A-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis CHIRON FZ 15K S FA vertical machining centre was manufactured in 2009. It features a HSK-A63 taper, complemented by a swivel-roundtable with dual 280 mm clamping surfaces. The machine includes a 48-station chain magazine and an internal cooling unit with a 70 bar filter. Ideal for complex machining tasks, the CHIRON FZ 15K S FA represents a robust addition to any production line. Reach out for more information. Additional equipment • Position sensor: Direct Scales in all Axis Djdpfxs Aifupe Acyjkw • Chip management: Chip flushing and chip conveyor • Cooling management: Internal cooling unit with filter, 70 bar • Workpiece measurement: Preparation Touchprobe, Renishaw • Oil mist separation: Electrostatic extraction, LTA • Fire-extinguishing system: Kraft + Bauer • Automation: Automatic door • Further Accessory: Rinsing pistol Machine Benefits Technical Machine Benefits • Clamping surface: 2x roundtable ø280 mm • Comprehensive cooling management with internal cooling unit and 70 bar filter • Advanced chip management with chip flushing and chip conveyor • Direct scales in all axes for precise positioning • Electrostatic oil mist extraction for a cleaner working environment • Fire-extinguishing system for enhanced safety • Automation features including an automatic door • Chain magazine: 48 stations • Spindle technology: motorspindle • Nc-swivel-roundtable technology: swinging bridge with 2 roundtables Extra Information Machine still under power Dimensions Machine Depth 4000 mm Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 1984, The DERITEND ROTADIE 15 is a versatile and robust machine designed for high-quality flexographic printing. Manufactured in 1984, this machine remains in production and is located in Germany. It is equipped with a vacuum feeder and a vacuum dust cleaner to ensure efficient and clean operation. The ROTADIE 15 features four flexo-printing units, allowing for precise and detailed printing capabilities. It supports bottom printing and is enhanced with ceramic rolls and a chamber doctor blade for superior print quality. The machine also includes side track printing units, an electric running register for precise alignment, and an automatic stacker for efficient handling of printed materials. With a maximum sheet size of 1.700 x 1.150 mm and a minimum sheet size of 520 x 600 mm, the ROTADIE 15 can handle a wide range of printing jobs. Its impressive maximum speed of 9,000 sheets per hour makes it a reliable choice for high-volume printing tasks. Format: Max: 1.700 x 1.150 mm min: 520 x 600 mm Equipment: Dkodpfxjxizdms Acysw Vacuum Feeder Vacuum Dust Cleaner No 4 Flexo-Printing Units Bottom Printing With Ceramic Rolls & Chamber Doctor Blade Side track printing Units Electric Running Register Automatic Stacker Max. Sheet Size 1.700 x 1.150 mm Min. Sheet Size 520 x 600 mm Max. Speed 9.000 Sheets per Hour

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500, similar to but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water up to approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in version 16/350 PS with POWERSTEAM / high-pressure steam) and chemical-free weed control function with approx. 99°C (only in version 23/350). The following models are available: - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and dry weight without water tank: 1205x1250x1330 mm, approx. 280 kg - Dimensions and dry weight with 300 l water tank: 1250x1900x1330 mm, approx. 350 kg - Dimensions and dry weight with 500 l water tank: 1250x1900x1330 mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots Djdedqkrwepfx Acyjkw - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Other accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotary nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: used, 8 pneumatic cylinders, 3 heating elements, working width 2600 x 1900 mm. Location: Nattheim. Dsdpfx Acjzd Hnmeyskw