Used Brother Cnc Milling for sale (63)

Condition: excellent (used), New 2006 Brother CNC-B00 Control Ncedjrfxr Uopfx Ad Ejn Pallet Change time 3.4 seconds Pallet Size 600 x 425mm X axis 550mm Y axis 400mm Z axis 415mm Spindle speed 12000rpm 40 Station ATC BT30

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Njdoym Naxjpfx Ad Ejcn Year of construction: 2016 Type of control: CNC Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, controller manufacturer: BROTHER, total height: 2,360 mm, table load: 200 kg, overall weight: 4,600 kg, spindle speed (max.): 12,000 rpm, This Brother TC 32B Vertical Machining Center was built in Japan in 2007. Equipped with a Brother control unit, this machine incorporates 3 + 1 axis and a rotary table. Its BT30 spindle can operate with a speed up to 12000 rpm. Additional equipment • chip conveyor • remote flyer • Kitagawa rotary plate Machine Benefits Technical Machine Benefits • 3 + 1 axis • Toolholders: random 26 positions • Fast forwards: 70-70-70 m/min • Pallets: 2 / 600 x 425 Dimensions Machine Depth 3700 mm Nodpfx Asyi Ehked Eocn

Condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FOR SALE Brother TC-22A Vertical CNC Machining Center: Manufacturer: Brother Model: TC-22A Type: 3-axis vertical CNC machining center (including optional 4th axis / rotary table) Travels: - X axis: approx. 500 mm - Y axis: approx. 400–410 mm - Z axis: approx. 410–610 mm (depending on version) Table: - Dimensions: approx. 650 mm x 400 mm Ncedpjydpymefx Ad Ejn - Max. table load: approx. 150–200 kg Spindle: - Taper: BT-30 or HSK40 (depending on configuration) - Max. speed: approx. 10,000–12,000 rpm - Motor power: up to approx. 11 kW Tool magazine (ATC): - 10 to 26 positions (depending on configuration) CNC Control: - Brother A00 or proprietary Brother CNC version Additional equipment: - Rotary table / 4th axis

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 112745, travel distance X-axis: 700 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 560 mm, controller model: BROTHER, spindle speed (max.): 16,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 08/04/26 and 16/04/26! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 360 mm Travel Z-axis: 560 mm Spindle speed: 16,000 rpm Number of tool changer positions: 14 Tool holder: BT 30 MACHINE DETAILS Ncsdpfxeyk Hqvs Ad Ejn Control: BROTHER Operating voltage: 380 V Connection: 21.5 kVA Frequency: 50/60 Hz Dimensions & Weight L x W x H: 2200 x 1800 x 2400 mm Machine weight: 3 t EQUIPMENT Air monitoring Tool breakage control 4th axis (rotary and indexing table)

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 112097, travel distance X-axis: 700 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 560 mm, spindle speed (min.): 16,000 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item on schedule between 08.04.26 and 16.04.26! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 360 mm Travel Z-axis: 560 mm Spindle speed: 16,000 rpm Tool changer positions: 14 Ncsdpjyk Hbzsfx Ad Eon Tool holder: BT 30 MACHINE DETAILS Control: BROTHER Operating voltage: 380 V Connection: 21.5 kVA Frequency: 50/60 Hz Dimensions & Weight L x W x H: 2200 x 1800 x 2400 mm Machine weight: 3 t EQUIPMENT Air monitoring Tool breakage detection 4th axis (indexing and rotary table)

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Brother C00, _____ Description: Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpm Movement X/Y/Z : 700/400/300 mm Tool holder : BBT 30 Mainspindle: Technology:Directdrive Speed:10.000 rpm Power (max.):26,2 kW Torque (max.):92 Nm Taper:BBT 30 Workingtable: Clampingsurface:800 x 400 mm Nodpjylrn Aofx Ad Escn Tableloading (max.):250 kg In general: Toolmagazine:21 Stations Rapid travers in X/Y/Z:50/50/56 m/min Equipment/Accessory: Chipmanagement:Chip coveyor Coolingmanagement:Minimumlubrication (IKZ), Company Lubrix V5 4.-Axis:Lehmann EA-510 with Counterbearing Workpiececlamping:Hydrulic, 80-210 bar Contactcontrol:Pneumatic Automationinterface I:Automatic Door (electrical) Automationinterface I:Robotinterface Oilmistseparation:Mechanical extraction, company Sara UC1 SD Columnextention:150 mm Setup operations:Electronic Handwheel Further Equipment:Trafo

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 22,000 rpm, This Brother TC 31AN was manufactured in 2007. It features a robust Fanuc machining center control, a high-speed spindle up to 22,000 rpm, and a BT30 spindle taper. The work table measures 500 x 270 mm, complemented by a 26-slot tool magazine. Specialized with a rotary changer table for efficient fixture loading. Contact us for further details regarding this machine. • Quantity: 2 similar machines available • Work table size: 500 x 270 mm • Tool magazine: 26 slots • Special features: • Table designed as a rotary changer • Loading of clamping fixtures via magazine Ncjdpfx Adex D Nk De Esn Additional equipment • ABB robot

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, spindle speed (max.): 20,000 rpm, number of axes: 4, This 4-axis Brother TC-32BN QT was manufactured in 2008, featuring a Brother B00 control system, X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 415 mm. It boasts rapid traverse rates of 70 m/min, a spindle speed up to 20,000 rpm, and a tool magazine with 40 positions. Consider the opportunity to buy this Brother TC-32BN QT vertical machining centre. Contact us for more information about this machine. Ncjdpfxsx D Rdrj Ad Ejn • Table-to-spindle nose distance: 645 mm • Table size: 425 × 600 mm • Tool magazine capacity: 40 positions • Spindle override Additional equipment • 2 × Lehmann 4th-axis tables with tail support • Chip conveyor

Year of construction: 1996, condition: used, Control unbekannt weight 1,8 t Ncodpfx Adjyacptj Esn capacity 7,0 kVA

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 410 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 170 mm, total height: 1,962 mm, overall weight: 1,500 kg, controller manufacturer: BROTHER, controller model: CNC-A50, number of axes: 5, This 5-axis Brother HS-70A wire EDM machine was manufactured in 2003. It features a CNC-A50 control, working strokes of 410 x 260 x 170 mm, and can handle workpieces up to 350 kg. The wire diameter ranges from 0.1 to 0.3 mm, supporting precise cutting. If you are looking to get high-quality EDM capabilities, consider the Brother HS-70A machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Nodjyarx Repfx Ad Ejcn • Additional axes (u/v): ±35 mm • Maximum workpiece dimensions: 580 x 390 x 170 mm • Wire diameter: 0. 1 to 0. 3 mm • Excellent, regularly maintained condition • Ready for immediate use Extra Information Machine still under power Dimensions Machine Depth 1685 mm

Condition: used, Year of construction: 2021, operating hours: 4,360 h, functionality: fully functional, machine/vehicle number: JPN120193, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 435 mm, rapid traverse X-axis: 50 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Brother CNC C00, spindle speed (max.): 16,000 rpm, number of spindles: 1, Equipment: chip conveyor, Brother Speedio R650X2 – High-Speed CNC Drilling & Tapping Center, 40-Position ATC, Through-Spindle, RTT – 3 Machines Available Highly efficient 3-axis CNC machine in a compact design, ideal for series production in the automotive, aerospace, and medical technology industries. Excellent balance of performance, quality, and footprint. Technical Data: Njdex S Nlaepfx Ad Ejcn Model: Brother Speedio R650X2 Control: Brother CNC-C00 Travel: X 650 mm · Y 425 mm · Z 435 mm Spindle: BT-30, up to 16,000 rpm, 17 kW Tool magazine: 40-position, ultra-fast tool change Cooling: Through-spindle, 70 bar, including emulsion mist extraction Chip conveyor: Twin-system with filtration Special Equipment: CNC rotary table (EA510) Hydraulic clamping technology (80–210 bar) Robot interface Tool breakage monitoring & workpiece presence check Tool presetting device, spindle probe Electronic handwheel, lighting package, etc. Condition & Functionality: Fully operational, thoroughly reconditioned. Test reports and backup of control system data available. Machine is ready for demonstration at our premises. Location: 92353 Postbauer-Heng, Bavaria Scope of delivery: All technical documentation, maintenance logs, and spindle probe. All machines are in very good condition, regularly maintained, and immediately available. Machine 1 Model: Brother Speedio R650X2 Year of manufacture: 2020 Serial number: JPN116055 Operating hours: approx. 9,600 Power-on hours: approx. 20,708 Machine 2 Model: Brother Speedio R650X2 Year of manufacture: 2021 Serial number: JPN119597 Operating hours: approx. 7,800 Power-on hours: approx. 20,000 Machine 3 Model: Brother Speedio R650X2 Year of manufacture: 2021 Serial number: JPN120193 Operating hours: approx. 4,500 Power-on hours: approx. 16,500

Condition: ready for operation (used), A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment. Ncedsx Ecu Ejpfx Ad Een

Condition: good (used), Brother Exedra E-100 Mark II sewing machine, Foot Lifter FB II, MD-816B; Ncedpfx Adju Nyulo Esn You are purchasing an industrial sewing machine from Brother. Brother Exedra E-100 Mark II sewing machine, Foot Lifter FB II, MD-816B, DB2-B737-413 380V Find more items in our shop!

Condition: excellent (used), Year of construction: 2019, operating hours: 15,034 h, functionality: fully functional, travel distance X-axis: 200 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 300 mm, feed length X-axis: 200 mm, feed length Y-axis: 440 mm, feed length Z-axis: 300 mm, controller manufacturer: Fanuc, rotational speed (max.): 16,000 rpm, spindle speed (max.): 16,000 rpm, spindle nose: BT30, Equipment: chip conveyor, documentation/manual, 5-Axis CNC Machining Center Brother Speedio M140X2 with Loading Robot Zerobot 100P 2.0 Price: €142,000 plus VAT Location: 83134 Prutting Sale exclusively as a complete system _____ Description For sale is a high-quality, automated turnkey system comprising a 5-axis CNC machining center Brother Speedio M140X2 and a Zerobot 100P 2.0 loading robot. The system is in very good, well-maintained condition, fully operational, and was in productive use until recently. The robot is currently adapted to the Brother machine, allowing for rapid recommissioning. Ideal for series production, unmanned operation, and flexible automation. _____ CNC Machine Brother Speedio M140X2 • Year of manufacture: 2019 • Control: Fanuc • Condition: very good, thoroughly cleaned o No coolant residue in the tank o Fully functional • Travel axes: o X: 200 mm o Y: 440 mm o Z: 300 mm • Spindle: o BT30 o 16,000 rpm o Through-spindle coolant o C-axis rotary function with simultaneous operation o Spindle replaced NEW in April 2024 • Total operating hours: 15,034 h • Accessories: various accessories (see photos) _____ Loading Robot Zerobot 100P 2.0 • Year of manufacture: 2021 • Model: 4-axis loading robot • Max. payload: 100 kg Ncsdpfxeyhwuuo Ad Esn • Control: browser-based (web-enabled) • Material handling: o 3 racks o incl. 300 brackets for raw material • Accessories & Equipment: o CE declaration of conformity available o Grip jaw set: 6 pairs, clamping range 10–130 mm o various accessories (see photos) _____ Inspection & Handover • Inspection under power: possible by arrangement • Dismantling & collection: by purchaser • Sale to commercial customers, without target group restrictions _____ Summary • Sale price €142,000 plus VAT • Fully automated, ready-to-use manufacturing solution • Ideal for companies looking to automate quickly & cost-effectively If you are interested or have any questions, we look forward to hearing from you.

Condition: ready for operation (used), Brother B521127-5 Board from Brother TC-321 , serial no. according to photo, used, good condition, 100% functional Nsdpfxsi D Ulco Ad Eocn

Condition: ready for operation (used), Brother B521127-3 Board from Brother TC-321 , used, good condition, 100% functional Ncodpei D Uk Usfx Ad Eon

Condition: refurbished (used), Year of construction: 2021, Brother GTX PRO DTG Printer Year 2021 Very good condition used machine, checked by professional Print: Approximately 100 000 Support table included Printer overhauled, cleaned and tested Included : Ink around 40% (2+) Nodpfx Ask Rkpnod Escn Cleaning liquid full. Included with the used Brother GTX PRO Bulk : 5L Premium Dark Cotton Pre-Treatment, SK Color Dark Cotton; 1L of Premium Light Cotton Pre-Treatment, LIGHT Cotton by SK Color; 1L cleaning fluid for Brother GTX and GTX Pro CXS from SK Color; 100 DTF A3 sheets; 1 Kg of Premium DTF powder. Shipping not included We have various GTX Pro Bulk to sell and prices varies depending on print counts : Less than 40K prints : 13500€ between 40K et 60K prints : 12000€ between 60K et 80K prints : 11000€ between 80K et 100K prints : 10250€ More than 100K prints : 9500€

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 480 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 270 mm, table width: 300 mm, table length: 600 mm, table load: 300 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 6,000 rpm, overall weight: 2,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 1,381 h, spindle motor power: 7 W, input voltage: 440 V, type of input current: three-phase, Equipment: documentation/manual, x-travel 480 mm y-travel 360 mm z-travel 270 mm Control system: Brother Spindle speed range: 6 - 6,000 rpm Main spindle drive power: 5 / 7 kW Tool holder: SK 30 Nsdoxrpahepfx Ad Ejcn Table clamping surface: 600 x 300 mm Rapid traverse (x / y / z): 36 / 36 / 30 m/min Number of tool stations: 14 positions The machine is fully functional. Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical data and specifications are subject to change and are provided without guarantee. Intermediate sale reserved! The machine is sold without any warranty.

Condition: ready for operation (used), Brother B521104-2 Board from Brother TC-321 , used, good condition, 100% functional Ncodji D Uk Hspfx Ad Een

Condition: ready for operation (used), Brother B521169-3 Circuit Board from Brother TC-321, serial no. according to photo, used, good condition, 100% functional Njdpji D Ulkefx Ad Eocn

Condition: used, Year of construction: 2001, machine/vehicle number: 111855/111856/111640, functionality: fully functional, overall weight: 2,250 kg, Offer package: Brother Machining Centers Two fully operational machines and one defective machine included as a free addition with complete package purchase. From first owner and for own use. Machines under power and ready for demonstration. Machine No. 1 Brother TC-22A – Year of manufacture: 03/2001 – Serial number: 111855 Equipment: - Travel distances: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration system: 20 µm - Through-spindle coolant: 70 bar - Interface for Kitagawa rotary table connection - Machine weight: 2250 kg Machine No. 2 Brother TC-22A – Year of manufacture: 03/2001 – Serial number: 111856 Equipment: - Travel distances: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration system: 20 µm Nsdpfxoxp N Dbs Ad Eocn - Through-spindle coolant: 70 bar - Interface for Kitagawa rotary table connection - Machine weight: 2250 kg Machine No. 3 Brother TC-22A – Year of manufacture: 03/2000 – Serial number: 111640 – defective Included free of charge with purchase of the full package Spindle drive PE9A300UXXXC03H defective Axis drives 2x PE9A50UXXXC01 defective Y-axis motor P10B10120JXSB1 defective Equipment: - Travel distances: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration system: 20 µm - Through-spindle coolant: 70 bar - Interface for Kitagawa rotary table connection - Machine weight: 2250 kg Accessories included: Through-spindle coolant pump IKZ 70 bar PKCE570-12 UA3 - Pump pressure: 210 bar - Capacity: 20 l/min - New and unused Total price for all three items. Ex works, Luckenwalde (Germany), not loaded and without transport. Individual sale of the machines may be possible.

Condition: excellent (used), Year of construction: 2012, 4-Head Embroidery Machine with 12 Needles per Head Sewing speed: 1000 stitches per minute (spm) Distance between heads: 360 mm Embroidery area: 450 × 360 mm Stitch length: 0.1 ~ 12.7 mm (minimum increment 0.1 mm) Automatic thread trimming and thread break detection Power supply: 220 V; 1.1 kVA Machine dimensions: 2320 × 1360 × 1750 mm Weight: 600 kg Ncsdox Swxzjpfx Ad Ejn OPERATION MANUAL AVAILABLE

Condition: ready for operation (used), Year of construction: 2014, operating hours: 6,500 h, General Data Measurements width 1800 mm Measurements depth 2200 mm Njdex D Nziepfx Ad Ejcn Measurements height 2200 mm Machine weight 5000 kg Control Unit Brand BROTHER Main Drive Spindle speed range 10000 Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 400 mm Z-Axis Movement 350 mm Table Table load 250 kg This 4-axis Brother Speedio S700X1 was manufactured in 2014. It features a robust table size of 700 x 400 mm and a maximum table load of 250 kg. Equipped with a high-speed spindle up to 10,000 rpm and a 15 kW motor, it supports a tool magazine with 24 tools. Ideal for precise and efficient machining. Contact us for more information about this machine. Application Types Milling

Condition: like new (used), Year of construction: 2023, The machine is almost new, it has only 600 prints on the clock. It was turned off for more than a year and now it has both print heads clogged, so they must be replaced (around 3400€), maybe you can recover the color one. The set of inks must be renewed too. So for around 9.000€ you would have a brand new printer, factory new is 16.000€. Nodpfx Adex Sax Ro Ejcn