Used Briquetting Machine for sale (91,451)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roll material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Hfjdpfx Aaexdiyfjcsn Diameter: max. 240 mm Maximum print speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & Weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg Note: The machine heads must be replaced. The seller can offer full service in this regard. The machine will be available from 02.12.2025!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original machine price was approximately GBP 767,000! Hodpfx Aaoxlcz Eecjfn TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thickness (Cutting) Steel: 30 mm Stainless steel: 30 mm Aluminium: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y parallel): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral axis repeatability (R): 0.025 mm Mean bilateral axis positioning deviation (M): 0.05 mm Edge detection accuracy: ±0.5 mm Workpiece Weight Maximum workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Table Change Time Shuttle table changeover time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: Fiber Consumption Total power consumption (incl. exhaust, cooler): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan 2nd high-pressure cutting gas channel Prepared for N2 generator Internal dust extraction system Electrical cabinet position: top (mezzanine structure not included) Note: The machine has already been dismantled, is in storage, and is no longer connected to power.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 15135, grinding length: 800 mm, grinding width: 600 mm, grinding height: 500 mm, grinding wheel diameter: 400 mm, control type: NC control, TECHNICAL DETAILS Control: NC Ergomatic Grinding length: 800 mm Grinding width: 600 mm Grinding height: 500 mm Grinding wheel diameter: 400 mm EQUIPMENT Electromagnetic chuck Coolant purification system Hedpfxoxl Sifs Aacefn

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 12C2221, TECHNICAL DETAILS Width of the worktable: 3,380 mm Note: The digital nesting tableau is not included. Hsdpfx Asxlcguoacsfn

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, workpiece weight (max.): 400 kg, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel Paths Travel X: 550 mm Travel Y: 410 mm Travel Z: 460 mm Max. Spindle Speed: 15,000 rpm Workpiece Table Size Length: 860 mm Table Size Width: 400 mm Max. Workpiece Weight: 400 kg MACHINE DETAILS Control Model: Matsuura G-Tech 30i Motor Power: 22 kW Hjdpfxjxmgz Eo Aacjfn Dimensions & Weight Dimensions (L x W x H): 2,200 mm x 2,700 mm x 2,500 mm (L x W x H) Weight: 10,000 kg Interface: BT40 EQUIPMENT Probe 3 Clamps CE Marking

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 15360599, spindle speed (max.): 2,800 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 383 mm, disc diameter: 300 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 350 mm Z-axis travel: 383 mm Maximum grinding area: 600 x 350 mm Standard magnetic table size: 600 x 350 mm Grinding wheel diameter: 300 mm Spindle speed: 2,800 rpm Hodpfx Aajxnwm Uscjfn Clamping surface: 820 × 350 mm Maximum table load: 400 kg Table speed: 0.005–35 m/min Rapid traverse (cross and vertical movement): 4,000 mm/min MACHINE DETAILS Control system: Siemens Electrical Data Operating voltage: 400 V, 3-phase Mains frequency: 50 Hz Machine weight: 2,200 kg EQUIPMENT - Coolant system - Automatic grinding wheel dresser

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 50300315, product height (max.): 15 mm, product width (max.): 305 mm, product length (max.): 210 mm, paper weight (min.): 50 g/m², paper weight (max.): 200 g/m², TECHNICAL DETAILS Insert Length: min. 100 mm – max. 210 mm Width: min. 150 mm – max. 305 mm Hjdpfx Aasxdii Hecefn Weight: min. 50 g/m² – max. 200 g/m² Product height: max. 15 mm Envelope Length: min. 105 mm – max. 230 mm Width: min. 162 mm – max. 341 mm Flap width: min. 25 mm – max. 70 mm Speed: max. 15,000 envelopes/h MACHINE DETAILS Printed labels: 798,538 pcs Note: The machine will be available from 02.12.2025!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel X: 2,900 mm Travel Y: 1,000 mm Travel Z: 700 mm Tool holder: SK40 MACHINE DETAILS Hfedpsxltfhjfx Aacon Control manufacturer: Heidenhain

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11036928, air demand: 0.1 m³/h, Equipment: CE marking, Checkweigher up to 3000g D=1g With air blast reject into locked bin. Hsdpew Rp Ukjfx Aacefn

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0263, type of input current: three-phase, Equipment: rotational speed infinitely variable, FOR SALE: 2015 INTEC Fully Automated Robotic Linish and Polish Cell – 3 x ABB IRB 2600 Robots – Medical Device Spec Available now from Used Machine Tools Ireland Ltd – this 2015 INTEC Robotic Linishing and Polishing System offers a fully automated, high-precision surface finishing solution, ideal for manufacturers in medical devices, aerospace, automotive, and precision engineering. Now Dismantled and Available for Immediate Delivery Includes 3 x ABB Robots 3 x Polishing Stations 2 x Transfer Stations 3 x Control Stations Full Enclosure Fire Suppression System 🔧 Technical Specifications: Robots: 3 x ABB IRB 2600 M2004 Industrial Robots (20kg payload, 1.65m reach – versatile, high-speed, proven performers) Stations: Station 1: Rough Linishing Station 2: Intermediate Polishing Station 3: Final Finishing Transfer System: Includes 2 x integrated robotic transfer stations for seamless part handover Enclosure: Full safety enclosure with external part loading and removal hatch Control System: Allen Bradley PLC controls with user-friendly interface Hodpfjw Amntox Aacjfn Cycle Process: Operator loads part externally Robot 1 picks and linishes at Station 1 Transferred to Robot 2 for intermediate polish Then passed to Robot 3 for final finish Finished part exits via removal hatch ✅ Condition: Very Good Used Condition Service History: In operation within a clean medical device facility until July 2025 Fully maintained and operational at time of decommission 🌍 Key Features: High throughput and repeatability Ideal for aluminium, stainless steel, titanium and other precision parts Reduces manual handling and variability Complete end-to-end automated surface finishing Perfect upgrade for companies moving to Industry 4.0 and robotic automation 📦 Location: Ireland – Available for immediate inspection Used robotic polishing cell, automated linish machine for sale, ABB IRB 2600 robot polishing line, medical device finishing machine, robotic finishing system, automated surface treatment robot, used polishing machine with enclosure, robotic polishing cell Ireland, ABB polishing robot system for sale

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems Hfsdjwm Nq Ejpfx Aacsn • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Year of construction: 2024, operating hours: 15 h, condition: like new (used), functionality: fully functional, Imported from china to the uk 2025. Upgraded power, control and control panel wiring to UK/Eu specifications. Brand new and comissioned. fully automated and fully adjustable output to a maximum of 15meters per minute. Saftey pull cord and E stop system installed Hsdpexl U Scofx Aacsfn

Condition: excellent (used), Year of construction: 2001, Ref: 11019 . 2001 MBO Z2 Mobile Knife Can rotate 180° Left or right delivery Hfodpexnzrbsfx Aacon Specification: Infeed width 15 - 48 cm Infeed length 8 - 32 cm Infeed height 45 - 95 cm Max speed: 160 cycles/h

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Hjdpfx Aaoh U Rznjcjfn Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: excellent (used), Year of construction: 1982, Model D.I. + M.I.A Hfsdpfx Aew Svrroacen Max width of wheel 250mm/10" Min width of wheel 30mm / 1 1/4" Wheel diameter 508mm Horsepower 30 HP Weight 5900kg Year 1982 Manuals & electrical diagrams included

Condition: used, Used PRODUKT CZ model PS-LINE automatic filling and closing machine suitable for liquid or paste products. The device is suitable for filling into glass bottles and works in this working strokes: Hfedpfxexm T Hno Aacsn - Manual placing of bottles on the conveyor. - Automatic locking of bottles under the filling nozzles - Automatic loading of the nozzles into the neck of the bottles - Automatic filling of bottles with product (PRODFILL PS-1500/IV/L linear filling machine) - Automatic nozzle removal from packaging - Release of the stoppers and removal of the bottles from the filling position - Capping (automatic/manual) - Automatic locking of bottles in the closing position - Automatic cap closure (PRODSCREW ZS-1500/L/S screw cap closure device) - Release of stops and removal of bottles from the closing position - Automatic application of self-adhesive label (PRODLABEL ES-1500/L/R self-adhesive label applicator) - Moving from the labelling position Line has been dismantled, attached photos are from previous installation.

Condition: excellent (used), Year of construction: 1999, Ref:11017 . 1999 Polar 92 E Guillotine. 92cm guillotine Equipped with: Frequency controlled drive motor Variable speed back gauge Microprocessor control Colour display with operator guidance graphics Variable pressure clamp for various stocks Air table with blower Hfjdpfjxnzqqox Aacjn Steel side tables left & right 2 x HSS knives Knife changing device Rear Table Guard I.R. light barrier guard Including tools & manual. Specification: Cutting Width, Max: 92 cm Clamp Opening, Max: 11 cm Feed Depth, Max: 92 cm Power Required : 3kW

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Hfjdju Dahnspfx Aacjn Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, USED KIHEUNG POINT U6 WITH HEIDENHAIN TNC POINT TO POINT CONTROL SERIAL NUMBER 3190597 YEAR 1999 MACHINE DELIVERY / AVAILABILITY - Ex Stock - Subject to Prior Sale. MACHINE CONSTRUCTION & FEATURES  TRAVELLING TABLE CNC MILLING MACHINE WITH UNIVERSAL MANUAL INDEXING HEAD  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY CAST IRON CONTRUCTION WITH SOLID SLIDEWAYS  LINEAR SCALES. ADDITIONAL INCLUDED ACCESSORIES, OPTIONS & TOOLHOLDERS  COOLANT EQUIPMENT  MACHINE TABLE GUARDING INCLUDED. FIXED TABLE Working Surface 2,200 x 550 MM Tee Slot Configuration 5 T-SLOTS X 20H12 TRAVELS Longitudinal Column Travel (X-Axis) 1,600 MM Vertical Head Travel (Y-Axis) 900 MM Cross Travel (Z-Axis) 700 MM SPINDLE HEAD Spindle Nose Taper ISO 50 Spindle Speeds - 2 Ranges 40-1600 RPM Spindle Motor Power 11.0 KW SLIDE FEEDS Cutting Feedrate 2000 (LONG AND CROSS), 1000 (VERT) MM / MIN Rapid Traverse (X, Y-Axis) 5 M/MIN Rapid Traverse (Z-Axis) 2.5 M/MIN Rapid Traverse (Z-Axis) 15 M/MIN POWER SUPPLY Voltage 415V / 50HZ / 3PH Hfedpsvrzv Eefx Aacjn MACHINE Floor Space 4,750 x 2,720 MM Height 3,050 MM Weight 8,000 KGS

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM Hjdpfxeh U Nvko Aacefn WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 6011, Used Soraluce FP-8000 Travelling Column Floor Type milling machine with HEIDENHAIN TNC430CA control and 60ATC Year of manufacture 2001 MACHINE CONSTRUCTION, FEATURES & FITTED OPTIONS • Travelling Column Floor Type Design. • High Performance Linear Guideways. • Orthogonal Auto Indexing Milling Head - 2.5° x 2.5° • X / Y / Z Linear Scales. • 2 off 800mm dimeter indexing tables without any top T slotted platens • Full Length Swarf Conveyor. • Operator’s Platform. TRAVELS – MAIN MACHINE Longitudinal Travel (X-Axis) - 8,000 MM Vertical Travel (Y-Axis) - 2,000 MM Ram Travel (Z-Axis) - 1,200 MM SPINDLE HEAD Spindle Nose Taper - BT-50 Pull Stud - MAS BT50 Type 2 Spindle Speeds - 2 Ranges - 11.4 ~ 230 & 923 ~ 3,000 RPM Spindle Power - 30.0 KW FEEDS Cutting Feedrate - 5 ~ 5,000 MM / MIN Rapid Traverse (X-Axis) - 15 M / MIN Rapid Traverse (Y-Axis) - 15 M / MIN Rapid Traverse (Z-Axis) - 15 M / MIN Feed Motor (X-Axis) - 57 NM Feed Motor (Y-Axis) - 27 NM Feed Motor (Z-Axis) - 27 NM ATC Tool Storage Capacity - 60 Station Chain Type Hfedeuv Hn Sspfx Aacon Tool Shank - ISO-50 MOTOR Spindle Drive Motor - 30.0 KW POWER SUPPLY Voltage - 415V / 50HZ / 3PH SIZE AND WEIGHT Floor Space - 14500 X 6,500 MM Height - 5,250 MM Weight - 25,000 KGS

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Hfedpor Hr Arjfx Aacon Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 6011, Used Soraluce FP-8000 Travelling Column Floor Type milling machine with HEIDENHAIN TNC430CA control and 60ATC Year of manufacture 2001 MACHINE CONSTRUCTION, FEATURES & FITTED OPTIONS • Travelling Column Floor Type Design. • High Performance Linear Guideways. • Orthogonal Auto Indexing Milling Head - 2.5° x 2.5° • X / Y / Z Linear Scales. • 2 off 800mm dimeter indexing tables without any top T slotted platens • Full Length Swarf Conveyor. • Operator’s Platform. TRAVELS – MAIN MACHINE Longitudinal Travel (X-Axis) - 8,000 MM Vertical Travel (Y-Axis) - 2,000 MM Ram Travel (Z-Axis) - 1,200 MM SPINDLE HEAD Spindle Nose Taper - BT-50 Pull Stud - MAS BT50 Type 2 Spindle Speeds - 2 Ranges - 11.4 ~ 230 & 923 ~ 3,000 RPM Spindle Power - 30.0 KW Hfsdpfx Ajuqytvjacon FEEDS Cutting Feedrate - 5 ~ 5,000 MM / MIN Rapid Traverse (X-Axis) - 15 M / MIN Rapid Traverse (Y-Axis) - 15 M / MIN Rapid Traverse (Z-Axis) - 15 M / MIN Feed Motor (X-Axis) - 57 NM Feed Motor (Y-Axis) - 27 NM Feed Motor (Z-Axis) - 27 NM ATC Tool Storage Capacity - 60 Station Chain Type Tool Shank - ISO-50 MOTOR Spindle Drive Motor - 30.0 KW POWER SUPPLY Voltage - 415V / 50HZ / 3PH SIZE AND WEIGHT Floor Space - 14500 X 6,500 MM Height - 5,250 MM Weight - 25,000 KGS

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hfedpsuv Hrdofx Aacen Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Ermak Model EKM80/150MTB universal ironworking machine., Serial number 51273-B690FC. Year 2014. PUNCHING 80-Ton punching pressure Max diameter 40mm at 14mm thickness Max thickness 24mm at 24mm diameter. Throat depth 510mm Stroke length 70mm Cycles/min at 15mm stroke 35 pieces Table size 625 x 550mm Working height to die 1200mm FLAT SHEARING Flat Bar (Max. thickness) 300 x 20mm Flat Bar (Max width) 450 x 15mm Blade Length 475mm Angle Flange Trim 80mm Working Height 1020mm ANGLE SHEARING At 90 Degree shearing 130 x 130 x 13mm At 45 Degree miter shearing 70 x 70 x 7mm Working height 1225mm BAR SHEARING Round Bar Shearing 45mm Square Bar Shearing 45mm Working height 1355mm Hsdpfevmzlcex Aacofn NOTCHING Material thickness 12mm Rectangular notching width 52mm Rectangular notching depth 52mm V notcher ( side x side x T) 52 x 52 x 12 Working height 1015mm