Used Brian Beckum 315 Meat Saw for sale (12,572)

Condition: used, Year of construction: 1998, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Credpfx Aey Hqdajqvsi Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Weight: 490 kg

Condition: used, Year of construction: 1990, Wheel diameter: 440 mm Throat (frame opening): 390 mm Crsdpfxsy Hqdmj Aqvoi Cutting depth: 280 mm Tilting table: yes, 0 to +20° Table size: 500 mm x 450 mm Blade speed: 18 m/min Motor power: 1.5 kW / 400V Motor brake: yes / automatic Extraction connection: 2 x 100 mm Machine length: 780 mm Machine width: 585 mm Machine height: 1735 mm Weight: 190 kg

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting • Ball-bearing swivel table • Hydraulic brake cylinder • Large, robust material support • Cooling system • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Crsdpfer Ik Sqox Aqvoi Saw band dimensions: 2765x27x0.9mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Delivery time: from stock in Waiblingen, Beinstein.

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter cut - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Air blow gun Cedporh Dkyefx Aqvsri - Protective cover - Documentation - 400V

Condition: used, Year of construction: 1995, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 25 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. Cedezp Iu Sopfx Aqveri *

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Crodezp Nt Aepfx Aqvsi Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. The machine is particularly suitable for cutting and resawing logs and boards and features a continuously variable feed rate and a cutting depth control. Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Codpfezxrtqsx Aqvjri Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Continuously variable feed rate Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm in length × 600 mm in diameter Equipment: Resawing device for cutting logs and boards Programmable cutting depth control ELGO Electric Type 87P Pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm Heavy-duty industrial design Condition and scope of delivery as per photos Important note regarding the control system: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Additional information: The lower band saw wheel protrudes approx. 300 mm below floor level. Therefore, a corresponding floor recess is required for the installation of the machine. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site but would be available in the short term! Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: ready for operation (used), functionality: fully functional, Fatosa Frozen Meat Slicer, Frozen Blok Cutter Codszmp Rpjpfx Aqvori Sold on behalf of a customer – functioning machine, sold as is, without warranty, no returns.

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Credpfozhm Dpsx Aqvei Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Year of construction: 2013, condition: good (used), Robust and compact bridge saw with a fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Special design of the carriage for maximum cutting precision; Water collection tray with integrated water circulation system for cooling the blade; Robust and compact construction. Roller conveyor at the front Roller conveyor at the rear Crodpfx Aezu A N Isqvoi Saw blade size: 350 mm Motor power: 2 kW Voltage: 230 volts Weight: 173 kg Mobile Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Panhans bandsaw BSB 500 Upper and lower APA II bandsaw guides Tilting table top up to 45° Door locking system via limit switch Wheel diameter 500 mm Drive motor 1.5 kW / 2.0 hp 400 Volt motor with motor brake Band speed 1,290 m/min Maximum cutting height 320 mm Maximum cutting width 485 mm Maximum blade length 4,145 mm Table size 500x680 mm Table height 890 mm Dust extraction port 2x100mm Space requirement: 900x525x1925 mm Cedpfxodq D I Hj Aqveri Weight 220 kg CE compliant, GS tested Available in stock at 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 2500 mm Cutting width at the width stop: 1200 mm Cutting width at the cross-cut fence: 2500 mm Cutting depth: 100 mm Scorer: yes Height and tilt adjustment of saw blade: handwheel Width stop adjustment: manual Saw blade angle display: Scale Cutting height display: Scale Width stop display: Scala Cutting ruler display: Scala Crjdpfx Aqstpivksvji Saw blade diameter: 300mm Speeds: 4000 rpm Motor power / saw: 4.4 kW Motor brake: yes / automatic Tiltable cutter arbor: yes 0 - 45° Milling arbor height and tilt adjustment: handwheel Milling arbor height and tilt indicator: Scale Milling arbor: 30mm Milling arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. Tool diameter: 180 mm Motor power / cutter: 4.4kW Suction connection: 100 mm, 100 mm, 80 mm Machine length: 2500mm Machine width: 1500mm weight: 530kg

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t Crjdeu Nigwepfx Aqvsi dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg Crodpfx Asu Niuzeqvoi dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: used, Year of construction: 1979, Technical details: Crsdpeu Niu Usfx Aqvei throat: 410 mm dimension machine xH: 1,15m x 0,8m x 2,0m m Vertical band saw with saw band welding device. The table is tiltable. *

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Crjdpsvxi Ddjfx Aqvei Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Cedpfx Aev Erkaeqveri Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: used, Year of construction: 2001, turning speeds 15/30 U/min saw blade diameter max. Ø 370 mm Vice opening 180 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100x100 mm capacity 90 degrees: flat 180x100 mm 105 mm Csdpfx As Agpgxjqvsri 100x100 mm 130x100 mm 120 mm 100x100 mm 130x100 mm weight of the machine ca. 400 kg dimensions of the machine ca. 1100x900x1850 mm

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Cjdpfx Aqeu Ndf Iovsri Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: used, Year of construction: 2023, Max. cutting width: 4600 mm Max. cutting height, horizontal: 1958 mm Max. cutting height, vertical: 2070 mm Max. processing thickness: 60 mm Saw blade diameter: 250 mm Motor power: 4 kW Saw blade arbor: 30 mm Bottom support: fixed rollers Material support: aluminum lath grid with plastic pads Codpfxs Agw H Ts Aqvori Small parts support: yes Measuring system: scale Saw head swivel: manual Mounting: free-standing Extraction: external extraction required Weight approx.: 910 kg Extraction diameter: 2x100 mm Storage location:

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Crsdpfjzzfr Eex Aqvei Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1999, STRIEBIG III TRK scoring unit In wooden box Can be retrofitted to a Striebig Standard TRK Location: from stock 54634 Bitburg Credevluwvopfx Aqvei - available immediately -

Condition: excellent (used), mileage: 47,994 km, power: 125 kW (169.95 HP), first registration: 12/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,250 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 7, emission class: euro6, loading space length: 2,810 mm, loading space width: 1,900 mm, loading space height: 1,930 mm, Equipment: AdBlue, Bluetooth, USB port, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, = Additional Options and Accessories = - 7-inch touchscreen - Outside temperature display - Heated side mirrors - Hill start assist system - Car kit - Stability class 1 - DAB radio - Electric windows, front - EURO 6 - Driver airbag - Cup holders - Height-adjustable steering wheel - Keyless start/go Credpfxsz Ipzhj Aqvji - Air conditioning - Front center armrest - Emergency call system - Rain sensor - Rearview camera - Voice control - Immobilizer - Steering wheel shift paddles - Thermal glass - Partition without window = Notes = ❄️ MERCEDES-BENZ SPRINTER 315 CDI REFRIGERATED VAN ❄️ Professional refrigerated van, ideal for food, catering, fresh produce, and temperature-controlled transport. ✅ 315 CDI – 170 hp ✅ 9G-TRONIC automatic transmission ✅ 3,500 kg permissible total weight ✅ Euro VI ✅ Cruise control ✅ MBUX multimedia system with 7-inch touchscreen ✅ Rearview camera ✅ Tempmatic air conditioning ✅ Heated windshield & side mirrors ✅ Comfort seats A professional and versatile refrigerated vehicle, ready for daily use. Contact Auto Viger for further information or to schedule a viewing. = Additional Information = General Information Year of construction: 2022 Technical Information Number of cylinders: 4 Engine displacement: 1,950 cc Front axle: Steered Weights Unladen weight: 2,785 kg Payload: 715 kg GVW: 3,500 kg Functional Tail lift: Dhollandia DHLM.10, tailgate, 750 kg Body manufacturer: Thermo King Refrigeration engine: Diesel and electric Maintenance APK (Technical Inspection): New MOT upon delivery Condition Technical condition: very good Optical condition: very good Damage: none Warranty Warranty: 12 months Further Information Please contact Lorenz Schoutteet for further information.

Condition: new, Year of construction: 2026, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: Crjdpfx Aqew D T Dkevji T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2024, ZENZ ECOLINE – not operational in 2024 7m cutting length 100x130 cm throat capacity 95cm cutting width 22 kW electric motor 6000x100x1.1mm blade 850mm saw blade roller diameter Joystick for feed and lift with electronic position control Debarker Water lubrication 4 side supports 1 manual side support Crodpfx Ao Ahgytjqvsi 3 log lifters 2 log turners 1 log holding arm 3 level compensation systems with clamps 1 log roller Mobile system with 4 wheels and brakes, German homologation 3.5 t