Used Bottel Filling Machinery for sale (85,805)

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 15 m/min, controller model: LNC-Control, workpiece length (max.): 150 mm, total height: 2,100 mm, total length: 3,100 mm, total width: 1,860 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, number of spindles: 1, number of slots in tool magazine: 8, tool weight: 600 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMA-Machinery designs and assembles Dutch CNC routers and CNC portal milling machines. Flexible operation is ensured by the CadCm software from "PEGASUS"—draw easily using macros or freeform lines. No G-codes are required; you can import your own designs via DXF, DWG, EPS, PLT, and more. Continue using AutoDesk Fusion, AutoCAD, SketchUp, or other CAD programs without limitation. Available working areas and prices: • 1300x2600mm, Z-axis 200mm: €31,800 • 1600x3200mm, Z-axis 200mm: €37,500 • 2100x3200mm, Z-axis 200mm: €41,600 CNC Milling Machine BudgeCraft: Compact High-Precision Machining Center (0.01 mm) Dutch-assembled CNC milling machine compliant with EG2023 EUROPE CE-Standard. Spindle Motor (ATC Spindle): - Tool holder type: ISO-BIESSE - Inverter-controlled spindle motor. 3-axis controlled, 3,000–24,000 rpm. Double linear high-precision guides guarantee maximum accuracy. The 2nd Z-axis is positioned by a ball screw, enabling 3D and relief machining. - Tools are clamped automatically. Spindle sensors monitor correct clamping and release of tool holders. During tool changes, both cones and spindle are pneumatically cleaned. Drive System: - Brushless servo motors allow for high acceleration and extremely high speeds. These motors reduce maintenance due to digital control and feedback, providing greater precision and improved machining finish. - Linear tool magazine located under the gantry, with 8–14 spacious positions. Automatic tool changer. Reference Stops: - Reduced cutting losses and efficient, rapid positioning using stop cylinders at the front of the vacuum worktable. Standard rear-mounted solid stop cylinders for large sheet dimensions are directly attached to the table. Automatic Tool Length Measurement System: Milling Spindle Protective Cover: - A key safety device that protects the motor from foreign objects and debris, helping to extend motor life and improve workplace safety. CNC/NORM EG2023-EUROPEO Safety: - Optical electronic safety ensures immediate stoppage of the machine when a person enters the secured area, protecting individuals from machine-related hazards. Bwodpfx Adjxl Apioxjw Technical specifications: - X-axis working range: 2,600–3,200mm - Y-axis working range: 1,300–1,600–2,100mm - Table size options: 1326 / 1632 / 2132 - Z-axis stroke: mm - Structure: Portal / Gantry construction: Yes - Spindle motor: 9kW air-cooled - ATC spindle: Yes - Speed: 3,000–24,000 rpm - X-axis movement: 50m/min - Y-axis movement: 50m/min - Z-axis movement: 15m/min - Tool holder: ISO30–ER32/ER40 - Software: Pegasus PWoodMilling - Vacuum pump: Side channel blower turbine vacuum pump 7.5kW, max flow rate: 340m³/h

Year of construction: 2022, operating hours: 4,000 h, condition: like new (used), functionality: fully functional, Complete Wood Shavings Line Bedpfx Adjxq Rvuexoww Includes: Loghaver, Vecoplan screen, 3 conveyors, dryer, and furnace Fully operational wood shavings production line in excellent condition. The equipment can be sold as a complete set or individually by parts. For more information, technical details, or photos, please contact us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, overall weight: 5,000 kg, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, Vertical machining center FIRST MCV 1000, travels 1150 x 500 mm, 24 tools, ISO 40, 10,000 rpm, through spindle coolant, visible in production. Bjdpfxoxqy Exe Adxoww

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 201805015, working length: 4,100 mm, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, total width: 1,550 mm, total length: 3,560 mm, total height: 2,850 mm, pressing force: 185 t, overall weight: 18,000 kg, space requirement height: 3,440 mm, table length: 4,100 mm, installation height: 500 mm, Lightly used press brake in excellent condition. 185 tons, 4 meters, 6 axes No. 4 rear backgauges, No. 2 retractable pneumatic supports ESA 660W CNC LAG press brakes represent the perfect combination of Italian technological innovation, meticulous attention to detail and design, and the substantial production capabilities of China. These strengths, combined with the highest quality European components, allow LAG to offer its customers press brakes, shears, and inserting machines with the best price-to-performance ratio on the market. Bjdpfx Aswync Hodxeww This is the top-of-the-line model, equipped with accessories and automation for highly profitable performance. Main standard configuration of the G-TOP press brake: - G-FLEX crowning compensation system - G-CS active crowning system - 6 axes (Y1-Y2-X-R-Z1-Z2) - Dual pump system: one main power pump and one pump dedicated to the crowning system - DSP AP safety system - Touchscreen control panel on the electrical cabinet - Sliding front supports - Touchscreen CNC control - Reference 4-axis rear backgauge system, model GRP-4 (X-R-Z1-Z2)

Condition: used, Year of construction: 1998, Folder Gluer ACE MACHINERY Model SIGNATURE 110N 46CS Manufacture date: 1998 - Max Carton Width: 1.100 mm - HHS Gluing device type KFE-KPE9, cold glue Bwjdpfx Adjxcv Aqjxow The machine was mainly used for gluing shoe boxes and was modified/adapted for this purpose to perform longitudinal seams and double longitudinal seams.

Condition: new, Year of construction: 2025, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min Bsdpfx Asp R Iwhsdxsww This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, feed length X-axis: 3,200 mm, feed length Y-axis: 1,600 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: Syntec, controller model: SYNTEC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Price: On request Bodpfx Adotty Ahexeww CNC NESTING ROUTER MACHINE WITH 0-360º SAW CNC Machining Centre Year of manufacture: 2025 Hiteco CNC 12kW milling motor HSK63F tool holder Tool changer magazine, 10 positions Multi-drill unit 7 vertical drills 8 horizontal drills 1 X-axis groove saw 1 Y-axis groove saw Software: PWood Pegasus Working area X-axis: 3,200 mm Working area Y-axis: 1,600 mm Working area Z-axis: 200 mm Vacuum pump Becker VTLF2.250 5.5kW Omron safety light curtain Central automatic grease lubrication Extraction connection diameter: Ø200 Required capacity: 28m/m | 2,900m3/h Weight: 3,200 kg Free 1-year online help desk. Teamviewer support in English. This service prevents unnecessary downtime. Delivery and installation in Europe.

Year of construction: 2019, condition: used, Pipe bending machine DW75NC Europe Design Semi Automatic with Measurements Panels Pipe Bender. The DW75 semi-automatic pipe bending machines are easy to operate, robustly constructed, and achieve excellent bending results. The NC program precisely controls the bend angle (Y-axis) and rotation (Z-axis). The distance between the bends (X-axis) is configured using easily adjustable and very precise mechanical stops. Entering a new bending program is very intuitive with the help of an industrial touch controller and the accurate and user-friendly software. The DW75 semiautomatic pipe bender is by far the most efficient machine in its class to minimize energy consumption. BLMA as top 10 tube bending manufacturers offer a wide assortment of 5- Axes NC tube bending machine. The DW75 semi-automatic tube bender is fabricated from the finest quality of raw materials to provide maximum durability and long service life. Used in various industrial uses, these are highly acknowledged for Its specific design, precision, and standard performance. Main specification Max bending capacity: ¢75mm x 5mm Max bending radius: R400mm Bjdpfoi Ewy Tex Adxoww Bending degree: 0-190° Max effective distance of mandrel: 2800mm Motor power: 7.5Kw Max hydraulic pressure 12Mpa Oil tank capability 250L Measurement: 400 x 100 x 110cm Weight of machine: 2000kg

Condition: like new (used), functionality: fully functional, fuel type: hybrid, color: black, overall weight: 8,000 kg, empty load weight: 8,000 kg, maximum load weight: 8,000 kg, lifting height: 23 mm, tire condition: 100 %, drive condition: 100 %, number of seats: 1, Year of construction: 2024, Equipment: crane, rubber tracks, Rubber-tracked crane with dimensions 1800 mm wide x 2100 mm high x 5500 mm long, extends up to 23 m, maximum weight 8 tons, comes with remote control, is hybrid and diesel-powered, available in the Odivelas Famões area. The machine is suitable for working in locations with limited access. Bwsdpfx Adexpnnfoxew

Year of construction: 2020, operating hours: 245 h, condition: good (used), functionality: fully functional, machine/vehicle number: QX20200111A551, Used - Pre insulated pipe decoiler. The decoiler could be used for other pipe types. Pipe coiler parameters: Installed power: 5.5 KW Voltage: 220V Current frequency: 50 Hz Compressed air: 6 Bar Total weight: 1700 kg Coil dimensions: Coil ID: 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400mm Coil OD: up to 3100mm Coil width: up to 1100mm Bwjdot Eatxjpfx Adxjw Please call for more information

Year of construction: 2024, condition: new, functionality: fully functional, Since 1997, Copier Machinery has been dedicated to providing the best solution for metal pipe fabrication, accompanied by fast worldwide service and support. We offer a wide portfolio of pipe preparation machinery for cutting, beveling, end working, welding, and roll grooving, focusing on innovation, stability, reliability, and premium quality. Beaver 3 S Manual - Stationary Pipe Beveling Machine ----- Machining range: Pipes and tubes with outside diameter between 0.25" - 3" (12mm - 90mm). Bwodpfx Aew U Ek Ajdxew Maximum wall thickness in one pass: 12mm ----- Copier’s state-of-the-art stationary beveling machines are user-friendly, equipped with a pipe stop and feed stop to ensure perfect set-up. Nearly every weld type can be achieved with more than 350 machine tooling options. The robust and durable design guarantees a minimum product lifespan of 25 years with low maintenance requirements.

Condition: like new (used), Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed. Bwedpfxsdz Tcbe Adxow

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 110 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 15 m/min, work area dimensions: - 1550x3200mm Numerical control CNC-Control LNC Working field X-axis 3200mm Working field Y-axis 1550mm Stackable infeed table Automatic loading system with lifting table 2,000kg ATC spindle 9kW Automatic tool changer with 16 positions Drilling head with 12 spindles - 12 vertical - 2 grooving saws X-Y axis Automatic unloading with motorized conveyor belt and end safety stop Automatic worktable dust extraction and cleaning Perimeter work area protection with light curtain Automatic lubrication system Becker vacuum pump 250m³/h VLF2.250 5.5kW Bwedpsw Tdf Nofx Adxow Please submit inquiries stating your company and telephone number.

Condition: good (used), Line was filling jars with chutneys and fruit sauces. Lovely condition. Bedpfx Adetux H Isxeww

Condition: excellent (used), Year of construction: 2013, operating hours: 200 h, functionality: fully functional, screw diameter: 65 mm, overall weight: 9,000 kg, clamping force: 785 kN, total width: 1,800 mm, total length: 4,500 mm, total height: 3,000 mm, power: 0.045 kW (0.06 HP), We offer for sale a slightly used injection blow moulding machine in excellent condition. It is connected and fully operational for demonstration purposes. We can also offer several ready-made molds for canisters and lamp shades. The machine is designed for use with PMMA, PC, PP, and PE resins. Bodpethk Rzofx Adxoww

Condition: good (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 160 m/min, controller manufacturer: Mircotec, workpiece length (max.): 5,500 mm, workpiece width (max.): 700 mm, workpiece height (max.): 100 mm, spindle motor power: 90,000 W, rotational speed (max.): 3,100 rpm, Automatic edging line BFB woodworking machines with Mircotec control. Year of manufacture 2004/2021. Maximum edging width 700mm, maximum edging thickness 100mm, 90kW drive motor. 4 adjustable saws. Included are cross conveyor in the basement, steep conveyor, cross-cut table, measuring/alignment, edger, splitter wedge, and board sorting. The line is fully functional and in good condition. Overhauled in 2021. Bwsdpoxfb Ecefx Adxsw

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Automatic roll to roll screen varnishing printing machine LTA-5060 Maximum print area: 500 x 600 mm Material thickness: suitable for different thicknesses Printing Material Thickness 0.02-0.5 mm (PET, PVC, ...) Screen frame 800 x 1000 mm Bwodpfxewkd Ele Adxsw Print speed: high-speed printing 0-2500 impression/hour Registration accuracy: accurate registration for high-quality print results The power of oven： three phase 380V 25KW 40A The power of printer：single phase 220V 3KW 15A Youtube video about similar LTA-4050 machine

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: KB-20211022002, 1 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tank, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Serial number - KB-20211022002 Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Bwedpfxowl H Nio Adxsw Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 900 mm, controller manufacturer: Syntec, table load: 1,500 kg, rotational speed (max.): 18,000 rpm, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 380 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, CNC Composite router Bwodpfsv Tbggex Adxjw

Condition: good (used), Year of construction: 1985, table diameter: 1,600 mm, rotary table diameter: 1,600 mm, 2x spindles (motors) for shaping 2x sanding devices Bsdpfoxqhcxex Adxsww Table diameter 1600 mm

Condition: new, Year of construction: 2025, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Lengths: 450 - 6000+ mm Bsdpfx Adef Hkgpjxjww Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: good (used), grinding width: 600 mm, The machine is in good condition. The magnetic plate is 800/500 mm and 1300x700 mm. Price per unit. Bwedpfx Adjt Ay Nhsxow

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Bwsdpfx Ajw Tbgdodxjw Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, feed length X-axis: 3,200 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, workpiece height (max.): 130 mm, workpiece weight (max.): 1,000 kg, total height: 2,400 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 3,800 kg, spindle motor power: 12,000 W, power: 24.6 kW (33.45 HP), saw blade diameter: 305 mm, input current: 32 A, air pressure: 7 bar, air demand: 3,000 m³/h, drill spindle length: 130 mm, power of the milling unit: 12,000 W, space requirement height: 2,400 mm, space requirement length: 5,780 mm, space requirement width: 3,100 mm, CNC NESTING FREESMACHINE MET ZAAG 0-360º CNC Bewerkingscentrum Bouwjaar 2025 Bedpfx Adjv Ra Nujxoww Hiteco CNC 12Kw freesmotor opname HSK63F gereedschap wisselmagazijn 10 Posities multi-dril 7x verticale boren 8x horizontale boren 1 groefzaag X-as 1 groefzaag Y-as software PWood Pegasus Wekrveld X-As 3.200mm Werkveld Y-as 1.600mm Werkveld Z-as 200mm Vacuümpomp Becker VTLF2.250 5.5Kw Iiebmgku Sotty Ahs Hog Omron veiligheid licht-straat centrale automatische vet-smering aansluit diameter afzuiging Ø200 Benodigde capaciteit 28m/m | 2900m3/h Gewicht 3.200Kg Gratis 1 jaar online help desk. Teamviewer voertaal Engels Deze service voorkomt overbodige stilstand. Levering en installatie in Europa

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. Bwsdpfeiv R Hhjx Adxew This listing on Machineseeker is also made by us: Marinus Machinery.