Used Boston Wire Stitcher for sale (3,784)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,300 mm, type of input current: three-phase, overall weight: 6,800 kg, Agie Progress V4. Machine available for viewing at our Semsales premises at the end of June. Iodpfx Ajwq U I Deg Doa Machine cleaned, serviced, and tested, fully functional. This machine is available for viewing and testing at our premises.

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device Isdpswrrp Uefx Ag Dsa -Manufacturer: CLOOS wire feeder, water-cooled -Type: lCK98A -Dimensions: 660/390/H350 mm -Weight: 23 kg

Year of construction: 1962, condition: good (used), machine/vehicle number: 364, max. pressure at 4,2 l/min: 550 - 570 bar capacity approx.: 30 l hydraulic motor: 220/380 V, 1400 rpm, 4 kW Ijdpfxjb Nuuge Ag Dja straight cutter, type GS 22 cutting range at 140 kg strength: 6 - 12 mm Ø cutting rate approx.: 8 - 12 /min Straightening machine, type RK 26 for straightening of strip steel and round material with a strength of: 26 - 50 kg weight approx.: 10 kg space requirement: 1200 x 900 x 850 mm Total weight approx.: 130 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine Iodpoxf I D Esfx Ag Doa travels: X 320, Y 220, U 120, V 120, Z 180 automatic wire threading can be seen in good working condition year 2002

Condition: good (used), functionality: fully functional, This hammering machine is a model for processing wires. The wire was sharpened on this machine. The machine has been partially overhauled. The mechanical hammer drive was completely dismantled, reworked, greased and reinstalled. The outer parts of the machine were partially refurbished. However, the electrics are old but fully functional. The motor has also been refurbished and is 1.5 KW. The machine has a hammering tool for wire sharpening included, wire diameter up to 1.5 mm. The name of the machine is unknown, but we assume it is an HMP or Felss. Ijdorqfxwspfx Ag Dja

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 500 mm Travel distance Y :350 mm Travel distance Z: 300 mm max. workpiece size X: 1050 mm max. workpiece size Y: 800 mm max. workpiece size Z: 295 mm max. workpiece weight: 1500 kg table size X: 780 mm table size Y: 630 mm with AWF ( Automatic Wire Feeding ) U / V axis: 42 mm Isdsw S Egfjpfx Ag Dsa generator: 50 Ampere submerged

Condition: excellent (used), Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, empty load weight: 2,500 kg, Equipment: documentation/manual, Machine in excellent condition. Ijdpfx Aev Im R Tog Dja Machine already cleaned. Sold as is or revised on request. Machine visible in our premises in Semsales in Switzerland.

Condition: good (used), Year of construction: 1999, Indoor crane, crane, electric wire rope hoist, hand trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Manufacturer: Steel, crane chassis with electric rope hoist -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min Iodpfstlzdqox Ag Dsa -Fine stroke: 1.35 m/min -Traction drive: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Number: 2 crane trolleys available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/piece

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Specifications Travels (X / Y / Z): 350 × 250 × 256 mm U / V Axis Travels: ± 70 mm Max. Workpiece Dimensions (LxWxH): approx. 750 × 550 × 250 mm Max. Workpiece Weight: approx. 450 kg Table Size: 620 × 400 mm Wire Diameter: 0.15 – 0.33 mm (commonly 0.25 mm) Max. Taper Cutting Angle: ± 30° at 100 mm height Positioning Accuracy: ± 2 µm Psw N Hjxdubzjl Icsrb Wire Threading System: Fully automatic, fast, reliable Generator: Intelligent GF AC Cut, real-time spark control Surface Finish: up to Ra 0.1–0.2 μm (after finishing cuts) Iedpfx Agext Hz Se Dea Control System: AgieVision (ergonomic, touch display, 3D graphics) Dielectric: Deionized water Machine Dimensions (LxWxH): approx. 2200 × 2200 × 2200 mm Machine Weight: approx. 3500–4000 kg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 70 kg, wire diameter (max.): 10 mm, type of input current: three-phase, input frequency: 50 Hz, Equipment: cooling unit, OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Iodpjwr Utiefx Ag Doa Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories More pictures and data will follow shortly. Iedpowt N Uqjfx Ag Dja

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, GF MachiningSolutions CUT E350 Year of manufacture: 2017 Control: AC CUT HMI Travel distances (X/Y/Z): 350 x 250 x 250 mm Travel distances (U/V): +/- 45 mm Taper: +/- 30° at 77 mm height Workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Collision protection on X/Y/Z axes Best surface finish on carbide/steel: 0.12/0.18 µm Maximum cutting speed: 300 mm²/min Overall dimensions: 1750 x 2470 x 2200 mm Total weight: 2525 kg The machine is cleaned, overhauled, and tested by us after receiving your order. We are happy to perform a test cut tailored to your needs. Optional services: - Commissioning and training - Transport Iedpfx Agexbzime Doa - Warranty - Cooling unit

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Isdpswtd Edjfx Ag Dea

Condition: good (used), Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Nominal load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min Ijdpfxjd Dzlms Ag Dja -Lifting height: about 30 m -without service -Dimensions: 1600/330/H470 mm -Weight: 356 kg

Condition: good (used), Year of construction: 2011, operating hours: 25,000 h, functionality: fully functional, Equipment: compressor, Heidelberg ST 100 Saddle Stitcher 6 Feeders + Cover Feeder | Year 2011 | We are selling our well-maintained and fully functional Heidelberg ST 100 saddle stitching line with 6 feeders and cover feeder, year of construction 2011. The machine has been serviced regularly and is ideal for print shops or bookbinderies seeking a reliable saddle stitcher. Technical details: Maximum format size (uncut): 355 x 311 mm Minimum format size (uncut): 128 x 92 mm Maximum format size (trimmed): 349 x 305 mm Minimum format size (trimmed): 120 x 89 mm Maximum product thickness: 10 mm Mechanical speed: up to 9,000 cycles per hour Number of feeders: 6 (including 4 double vertical feeders) Cover feeder: Yes Stitching heads: Standard or loop stitch, up to 4 heads Trimmer: Three-knife trimmer for precise cutting Location: 12277 Berlin Marienfelde, Nunsdorfer Ring 13 Sale: ex works/location Ijdpfxjxn Ddmo Ag Doa Reason for sale: New investment The machine can be inspected and collected by appointment. If you have any questions or require further information, please feel free to contact us.

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Iodpfxjtylpcj Ag Doa

Condition: new, New and unused Ijdsxfgvtjpfx Ag Dsa

Condition: good (used), Year of construction: 2004, functionality: fully functional, The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC-controlled electrical discharge machine with submerged machining; X/Y/Z travel: 550/370/410 mm; year of manufacture: 2004, CE-compliant, complete with automatic wire threading, chiller, and openable roof. Technical specifications of the FANUC ROBOCUT ALPHA 1iC wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm - Maximum workpiece weight: 1000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Stroke on axes X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse on X, Y, Z axes: 900 mm/min - Rapid traverse on U, V axes: 450 mm/min - Worktable size (L x W): 780 x 600 mm - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical supply: 400 V; 50/60 Hz - Total power requirement: 13 kW - Total machine weight: 3100 kg Iodpfxoxd R Hmo Ag Dsa

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 2520 mm Measurements height 2290 mm Machine weight 4400 kg Iedpfx Aexn Uyxjg Dja Main Drive Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 160 mm U-Axis Movement 160 mm Workpiece Workpiece weight 800 kg This 5-axis EXCETEK V 650 G was manufactured in 2013. It's a wire EDM machine capable of handling workpieces up to 1000 × 700 × 345 mm and 800 kg. Features include X, Y, Z travels of 650 mm, 400 mm, and 400 mm respectively, plus U/V-axis travel of 160 × 160 mm. It boasts a solid cast-iron construction and a stainless steel worktable for enhanced durability and precision. Contact us for more information about this machine. Application Types EDM

Condition: good (used), Glass silk nickel stranded wire, cable stranded wire -Type: 1.5 mm² -Wire: 1 Iedeb A Svmopfx Ag Dja -Length: 100 m -Weight: 2 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Fully automatic from feeder to trimmer configuration: • 1 cover feeder • 1 horizontal sheet feeder • 6 vertical sheet feeders • Control panel with main operating unit • Stitching machine with wire transport drive • Trimmer with trimmer infeed Technical data: Maximum untrimmed format: 320 - 350 x 460 mm Maximum trimmed format: 340 x 450 mm Maximum cutting thickness (single stream): 12 mm Max. cutting thickness (double stream): 1/2x die width Maximum stitching thickness: 6 mm Maximum front trim: 50 mm Maximum head and foot trim: 50 mm Stitching heads: maximum 4 Hohner narrow stitch heads Iodpfxou Ecl Sj Ag Dea Max. pile height of vertical feeders: approx. 250 mm (paper-dependent) Sheet opening – vacuum sucker: min. 6 mm trailing edge, 8 mm leading edge Sheet opening – gripper: max. 20 mm leading or trailing edge Speed: 2,000 – 10,000 products/h Mains voltage: 400V 3~ Mains frequency: 50/60 Hz Power consumption, max.: approx. 15 kW

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Iedpfx Ajtylpisg Dsa

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission. Iodpfow Ucyujx Ag Dea

Condition: used, functionality: fully functional, machine/vehicle number: D12L/8373, Offer Number: D12L/8373 Machinetype: wire nail press Make: WAFIOS Type: S110 Constr. year: approx1970 diameter range: 2,8-4,2 mm Ijdpfx Agewi Ubns Dja nail length: 15-110 mm output - pieces/min: 350 Location: In our warehouse

Condition: like new (used), ELBOR MAG - Wire Electrode Type SG-3 Condition: As new EN ISO 14341-A- (2011) G 46 4M21 4Si1/G42 3C1 AWS A5.18-05: ER70S-6 Ijdpfexbfnyjx Ag Dja Diameter: 1.0 mm 250 kg drum Approx. 230 kg still available in the drum