Used Book for sale (1,114)

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air. Gisdpfxjwud Tks Af Top

Condition: good (used), Hang PiccoStar 102-50 eyeletting machine Gijdpfx Afou Umavo Top The device is in perfect condition, ready to work. Technical data: 1 eyeletting head (eyelet hole diameter 5.5mm, outer flange 8mm) Power supply 230V Frontal and side margins Push-button operation. The device punches holes and crimps the eyelet in one pass. Automatic eyelet feeding.

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. Giedpfxju Umbao Af Tsp The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: touch control monitor table for mounting the cover with a laser pointer module for wrapping veneer edges ironing rollers barcode scanner Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm – spine thickness: min. 3mm; max. 25mm – cover weight range: 105 – 160 g/m2 – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz instruction manual included and a large set of materials. Ask About The Product

Condition: new, Table for hard cover making 1050×740 The device is brand new, with a 12 month warranty. European production, based on brand-name components. Work cycle: The operator manually hands the covering material to a gluing device in which the animal glue is automatically applied (working temperature 60-70’C). The covering material sheet with the glue applied, the operator places it manually on the stage, then manually adds the cardboard and joint board sheets. The operator prepares the pre-prepared cover manually to the device in which the top and bottom of the covering material are wrapped up and glued (patented brush system). During the sizing operation, the cover is pressed through the arrangement of the guide rollers. Covers leaving the device are immediately suitable for further processing The machine is equipped with: Gedpfxsu Umbys Af Tjip – A gluing machine applying glue to the top of the sheet – table with a suction – fixing elements for covering material and cardboard – a module for wrapping the cover – receiving table Technical data: Max format: 1050x740mm Min format: 140x140mm Capacity: 100-150 covers / h Thickness of the layer: 80-170 gsm Thickness of cardboard: 1-4mm Wrap up: 13-20mm Temperature of the adhesive: 30-100 ‚C Capacity of the bender: 2-3kg Smooth speed control of rollers and brushes Types of veneer material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1600x1800x1000mm Power supply: 380V Power consumption: 3.7kW Weight: 300kg We invite you to tests to our headquarters Machines are available from stock.

Condition: used, Year of construction: 2008, functionality: fully functional, Handfeed station – 14 x feeder – book Block feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Gjdpfjxtau Esx Af Tjip Max. book size 380x320 mm Min. book size 120x100 mm

Condition: used, Prakma book cover rounding machine ( Case Rounding machine) Very good condition, full function. Various rounding radii available. Other machines available (riveting machine, eyeletting machine, bundling machine, corner rounding machine, drilling machine, stitching machine) Gijdpfx Ajty Tr Eef Top More machines on stock. Price plus VAT. EXW. All information without guarantee. Subject to prior sale. Dealer transaction. The sale takes place under exclusion of any warranty.

Condition: good (used), Year of construction: 2005, Brand: CMC ITALIA Model: HSV 70-20 Year of manufacture: 2005 Automatic lining and laminating line - Automatic gluing machine Heliomat - Carton Spotter - Glue viscosity mixer 1) HELIOMAT HLM75 Gluing Format: 75 x 115 cm, high-pile feeder Godpfx Afjx Npb No Teip Paper size: 70 x 110 cm (max.) | 10 x 15 cm (min.) Mechanical speed: 20 pcs/min Machine control and adjustment via computer or manual operation of main functions. Servo drive for speed and precision Electronic speed regulation Glue recirculation Option includes glue mixer and viscometer Detachable feeder for easy cleaning of the gluing unit Continuous paper feeder Standard conveyor belt 1.5 m Paper detection via photocell Reduced maintenance and cleaning times Quick setups Power supply: 7 kW Weight: 820 kg 2) SPOTTER SPT110 Carton feeder Format: 70 × 110 cm, with external pre-loading Automatic positioning via photocells for 1 to 5 sheets of carton on glued paper Easy and fast format changeover Carton thickness: 0.5 to 4 mm Carton format: max. 70 x 110 cm, min. 15 x 20 cm Mechanical speed: 20 pcs/min Included: loading hopper with original ramp. 3) VIRGO 70 Casemaker Format: 70 × 110 cm, 4-side version Automatic folding from all four sides High precision and power folding on all four sides Easily calendered filling Output data on delivery table Calendar cycle for cover page and edge-to-edge gluing Carton thickness: 1.5 to 4 mm Carton format: max. 70 x 110 cm, min. 14 x 16 cm Mechanical speed: 20 pcs/min Power supply: 3 kW Weight: 960 kg

Condition: new, Year of construction: 2025, Meet MAGRAF˘S new M LINE FOR BOOKS, complete and easy hardcover system. LINE FOR HARDCOVER BOOKS The line is composed of the renowned machines; MAGRAF ZA-10 (cornering machine - cornering ends) Gedpfx Aji Dahhef Tjip MAGRAF KO-50x70 PLUS (casemaker – cover maker) MAGRAF KV-10 PLUS (head and tail band machine) MAGRAF UK-46 (casing in machine- insertion of the book block with the cover) MAGRAF PK-50x40 PLUS (pressing and joint forming machine)

Condition: ready for operation (used), Year of construction: 1993, 5 clamps side glue premelter dust extractor bag cover feeder Giodpfx Aeyagutsf Tjp

Condition: new, Year of construction: 2025, HIDRAULIC BOOK PRESS PK-55x38 H -is a double press of very new conceiving for books and agendas -it is quick and simple to use -maximum size of material; 550x380 mm -the new model has a timer Gedpfebyhnksx Af Toip

Condition: new, Year of construction: 2025, BOOK CASE ROUNDING MACHINE MAGRAF SK-46 Giedpfefhgzbsx Af Tjp

Condition: new, Year of construction: 2025, BOOK BLOCK ROUNDING MACHINE (with heating device) MAGRAF RU-50 Gsdobyhnfepfx Af Teip is used for rounding the bridge of the book block. Maximum lenght 500mm

Condition: used, Year of construction: 2015, Perfecta Bookline Plus Perfect Binding Machine Gedpfx Afoxz A Tmo Teip Number of Clamps: 5 clamps Glazing unit Mechanical Speed: Up to 2,000 cycles/hour (or approximately 1,800 books/hour depending on configuration) Max Book Size (WxH): 430 x 320 mm (approx. 16.9 x 12.6 inches) Min Book Size (WxH): 110 x 105 mm (approx. 4.3 x 4.1 inches) Book Thickness (Spine): 6 – 80 mm Control Interface: Color touchscreen monitor with Navigator SE UI for motorized/automatic settings Feeding: Hand feeding station with jogger; automatic cover feeder (top-loading) with scoring Spine Preparation: Milling and roughening station with dust extraction system Counter: 5 mios

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, product height (max.): 80 mm, product width (min.): 105 mm, product width (max.): 420 mm, product height (min.): 6 mm, product length (max.): 720 mm, product length (min.): 170 mm, A new mainframe computer (IPC) was installed in 2022. Ready for shipment: Machine can be shipped for an additional charge of €1,500! TECHNICAL DETAILS Cycle rate: 60 covers/min Gsdowbtmgspfx Af Toip Setup time: approx. 5 min Processable formats Cover height: 170 - 720 mm Cover width: 105 - 410 mm Spine width: 6 - 80 mm Material thickness: 1 - 4 mm MACHINE DETAILS Area of application: Processing hardcovers, book covers, and 3-part covers EQUIPMENT - Soft spine feeder

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, year of last overhaul: 2024, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. 16 gluing stations, presses, transfers, cover attachment, three-knife, corner rounding. Capacity up to 5,000 cardboard books per hour Special cardboard folding machines included Gsdswfr Udepfx Af Teip

Condition: excellent (used), Machine for cutting labels, books, brochures from pusher dies. Maximum format 350 x 350 mm Gjdpswm Hk Aofx Af Teip

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S8758, A machine for gluing cardboard books. Gluing is done using 16 heads. This allows selective application of glue where it is needed. Ideal for gluing board books with flaps, board books with puzzles Godowhc U Tjpfx Af Tjip

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. Offline set consists of a machine for gluing cardboard books - 8 stations. Glue application from rollers. Separate press, machine for wrapping the cover. It is possible to buy a Wholenberg three-knife set with a set for rounding corners Giodpfewf Rnvox Af Tep I will sell to the company that offers the highest price.

Condition: excellent (used), Year of construction: 2004, Perfecta Bookline S Age: 2004 Counter: 65.000 Books Size: 45 x 27 cm Speed: up to 1800 books/ hour • 5 clamps • hand-feeding station with jogger • spine preparation with exhauster • hotmelt spine and side glue • premelter • coverfeeder (toploading), with scoring • Compressor Gjdpfxjv T I R Se Af Tsip Available immediately

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1050, IN ADDITION TO THE MACHINE, THERE ARE: KOLBUS ZU 840 SIGNATURE COLLECTOR, 4 STREAMFEEDER MOD. OMG LOADERS COMPLETE WITH CLAMPS, 1 MULLER MARTINI LOADER, BOOK BLOCK FEEDER WITH LEFT-HAND LOADING, RAISING DEVICE, AMBAFLEX TOWER MOD. SV-400-1800-HS. THE MACHINE IS WORKING AND CAN BE CHECKED AT OUR OFFICE IN MALALBERGO (BO), BY APPOINTMENT. Gsdjv Rp Nqepfx Af Tjip

Condition: like new (used), Year of construction: 2018, 4th Generation of The XXL system by Imaging Solutions 5-in-1 solution. A LayFlat book block producing from sheets in just one working step. One push of a button triggers all of the necessary individual steps: cutting, creasing, folding, pressing, and gluing. LayFlat book blocks are produced with minimum manpower requirements, and same-day finishing and shipping is possible. Specifications: 2300 sheets per hour XL format book blocks up to 370 mm x 457 mm (14.5” x 18”) High-level performance: up to 250 book blocks/h Barcode controlled product selection: Different page lengths and book configuration (inlays) within one roll possible thus reducing time for batching Optional inlay feeder with a stacking height of 220 mm (8.66”) Unlimited number of inlays can be glued between two pages Active adjustment of gluing head for precise and homogeneous glue application Optional in-line book press for perfect book spines Gedpfen Ut D Nsx Af Teip Easy to operate via touchscreen 5-in-1 fully automatic print finishing system Cutting, creasing, folding, pressing and gluing in only one workstep Complete LayFlat book blocks manufactured from sheets Integratable into barcode-controlled workflows (e.g. inline with 3-knife-trimmer) Provides consistent premium quality with low production costs Premium LayFlat photo book technology for panoramic pages Processes original photo paper and digital press paper.

Condition: ready for operation (used), Consisting of: full tools, books and accessories available Technical Data Working range -base machine with electric equipment -in feed unit, MR -book bloc in feed with splitter Giedpfx Afsq Aufqo Tjp -gluing unit -pre-heater and heated rounding unit -paternoster with press on unit -belt delivery 370mm x 270mm x 80mm max 125mm x 100mm x 6mm min 14 – 36 cycles per minute

Condition: good (used), Case maker Kolbus Model DA36 Minimum size 110 x 155 mm Maximum block size 405 x 560 mm Spine size 8 -80 mm Gedpfeuauivex Af Tsip Speed Machine can run 14-15 cases a minute in it´s current condition Formats that we do mostly on the machine are A4, A5, B5, B6 The machine can work with paper and PU leather materials. The machine is in operation and can be tested until September 2024, after that we install a new machine so the test will not be possible Location: Serbia

Condition: used, VEB Polygraph 882/2-18 gathering machine Giedpfxsx Ab Ncs Af Top 18 gathering stations Features suction feeding 3-phase power, requiring 2-10 kW of power consumption at 440 V

Condition: used, Year of construction: 1982, Kolbus DA 780 Automatic case maker with hard cover Production speed: ~25–35 cycles per minute Case size range: Approx. 140 × 200 mm – 670 × 390 mm Board thickness: 1–4 mm Spine width: 6–80 mm (adjustable) Cover material: Paper, cloth, or coated materials suitable for cold glue Glue type: Cold (dispersion) glue; hot-melt optional retrofit Drive power: ~3–5 kW Gijdpfx Afexz D Ncj Top Machine weight: ~2.5 – 3 tons