Used Bohrer Grinding for sale (4,216)

Condition: used, Year of construction: 1988, grinding diameter 250 mm grinding length 600 mm max. dia. of grinding wheel 355 mm max. width of grinding wheel 50 mm peripheral speed 2.000 m/min In our assessment, the machine is in good used condition Ljdpfxoynnvbo Adqori and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1988, Year 1988 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Lrjdpfxexmk Eus Adqji Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Ledpsxc Nypsfx Adqsri Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m Ledpfx Adjxq Hkusqeri In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2021, max. travel distances (transverse x longitudinal) 280 x 600 mm distance spindle /table 500 mm Grinding surface of table 250 x 500 mm Grinding Wheel Dimension 355 x 25 x 127 mm grinding wheel turning speeds 1.500 / 1.800 mm power requirement 2,2 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Lrodpfexp R D Njx Adqsi Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm Ljdoxuv Udopfx Adqsri grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Type Amb 6/4 VAI-Z In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Lrsdpjxzuyrofx Adqsi Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2012, workpiece . workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Swing over bezel area 70 mm dimension 150 x 300 mm max. turning speeds 250 min/-1 longitudinal adjustment manuell über Kettenrad Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) dimension D 205 x 450 mm flange diameter D 190 mm standards association D 127 mm drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec type GR-3520-NR mm diameter range D 20 - D 35 mm Lsdpfxox H Ando Adqeri dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Lrsdpfsx Ik Tkex Adqoi There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1997, grinding length 880 mm grinding width 510 mm Control Siemens max. turning speeds 4.300 min/-1 grinding wheel diameter 210 - 400 mm grinding wheel width 100 mm Ljdpfxewwl N Sj Adqsri total power requirement 26 kW weight of the machine ca. 7,5 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2006, grinding diameter 250 mm Ljdjx I Sigspfx Adqsri grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A weight of the machine ca. 3,8 t The machine is untested and is being sold for spare parts only! Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2000, centre distance 1000 mm grinding length 1000 mm centre height 300 mm Control Siemens 840 Lrodpfoynbi Iex Adqji 800 kg weight of the machine ca. 6,7 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. Lrsdexc Nyvjpfx Adqji Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Technical Data Manufacturer: Technica Model: 5100 Design: Centre grinding machine with vertical construction Workpiece holding: Between centres with tailstock and guide Grinding spindle: High-speed grinding spindle Equipment: Various grinding wheels and live centres included Maximum workpiece length: 1100 mm Minimum workpiece length: 50 mm Maximum workpiece diameter: 125 mm Minimum workpiece diameter: 8 mm Centre height above guide: 145 mm Centre height above carriage: 65 mm Centre hole taper angle: 60° Maximum centre hole diameter: 50 mm Minimum core hole diameter: 2 mm Weight: 460 kg Lsdjyw Rr Eopfx Adqeri Dimensions: 850 x 750 x 1850 mm Condition: Used, good No guarantee is given for the correctness, completeness, and up-to-dateness of the information provided.

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder, tool grinding machine -Motor power: 1.1 kW Loded Dfhwepfx Adqsri -Speed: 1410 rpm -Grinding discs: Ø 300 mm -Operating voltage: 380 volts -Dimensions: 1080/480/H1240 mm -Weight: 252 kg

Condition: new, grinding wheel diameter: 400 mm, Stock clearance - - Grinding wheels + grinding pins + flap wheels - new, unused - see photos and lists If interested, please submit a price offer!! Lrsdpfx Adjygw Nueqoi The grinding wheels 300 x 12/16/18 mm (in wooden crate) will be given away for free if required!!!

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 10,000 rpm, type of input current: three-phase, grinding wheel diameter: 250 mm, overall weight: 8,100 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 20 m/min, travel distance X-axis: 380 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 280 mm, grinding spindle motor power: 15,000 W, table length: 500 mm, table width: 330 mm, input voltage: 400 V, CNC Tool grinding machine SCHNEEBERGER Gemini DMR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC 31i B5 Software installed: Quinto Qg1 Colour touchscreen: Yes Number of axes: 5 Stroke X axis: 380 [mm] Max. Stroke speed X axis: 20000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis: 300 [mm] Max. Stroke speed Y axis: 5000 [mm/min] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 280 [mm] Max. Stroke speed Z axis: 20000 [mm/min] Resolution Z axis: 0.0001 [mm] Table length: 500 [mm] Table width: 330 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10000 [rpm] Grinding spindle motor power: 15 [kW] Max. diameter grinding wheel: 250 [mm] Weight: 8100 [Kg] INCLUDED EQUIPMENT: x1 grinding wheel changer with 8 positions x1 FANUC 6-axis robot, type LR Mate 200iC 5L x3 HEIDENHAIN linear glass scales on all X, Y, and Z axes Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Lrodpfx Adeywzayeqji Machine for sharpening tools such as milling cutters, taps, and drills. Machine comparable to brands such as Blohm, Elb, Ewag, Favretto, Fenix, GER, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, and Walter. Also consider cylindrical or surface grinding machines, lathes, machining centers, and milling machines.

Condition: good (used), Cup wheel diameter: 175 mm Table clamping surface: 150 x 250 mm Lrodpfx Asyvfq Eedqoi Max. installation height without/with magnetic chuck: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Required space approx.: 800 x 600 x 1600 mm Weight approx.: 200 kg

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Technical Details: grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons Lrsdpfsym Tuasx Adqji

Condition: used, Year of construction: 2000, Lot consists of: Ljdpfx Ajym Tcwodqeri (1) CNC angle approach cylindrical grinder Technical Details: diameter 250 x 800mm, VM24 grinding wheel balancing system, MARPOSS InProcess measuring unit, CNC SIEMENS SINUMERIK 840D

Condition: used, Year of construction: 2000, Lot consists of: (1) Crankshaft machining unit Lrsdpfsym Tbgex Adqoi Technical details: Crankshaft machining unit, 400V 50Hz 12.5kVA 18A, CNC SIEMENS SINUMERIK 840D

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC grinder Ledpfx Aeym S S Djdqeri Technical details: center height 180 mm, working range Ø 200 x 600 mm, one grinding slide / travel 150 mm, CNC SIEMENS SINUMERIK 840D, dimensions (LxWxH) approx. 3 x 2 x 2 m, weight approx. 6.5 t.

Condition: used, Year of construction: 2004, Lot consists of: Lrsdpfx Ajym Syhjdqji (1) CNC main bearing grinder Technical Details: Crankshaft length 630 mm x diameter 180 mm, 2 grinding spindles (grinding wheel diameter 400 mm), MARPOSS E82 in-process grinding wheel balancing system, CNC LANDIS 6400, weight approx. 16 tons

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC con-rod bearing grinder. Technical details: crankshaft length 600 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 in-process grinding wheel balancing system, CNC LANDIS 6400, weight approx. 16t. Lredpfjym Spijx Adqoi

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 113981, center height: 180 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, overall weight: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the period from 08.04.2026 to 16.04.2026! TECHNICAL DETAILS Centre height: approx. 180 mm Centre distance: approx. 2,000 mm Grinding wheel diameter: approx. 400 mm Grinding wheel width: 100 mm MACHINE DETAILS Lredsyladfspfx Adqei Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 30 A Power connection: 7.5 kW Dimensions & weight Dimensions (L x W x H): 7,000 x 2,000 x 1,800 mm Weight: 5,000 kg External reference: 20