Used Bodo Gerhard Celle for sale (1,118)

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Iodouviumepfx Am Isia Technical Specifications: Temperature range: -40...+140°C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (see picture) (Specifications subject to changes and errors!) For further questions, we would be happy to assist you by phone.

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% Iisdpjvb Hanofx Am Iea - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: Iedpjvb E Uqjfx Am Ijia - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2026, condition: new, functionality: fully functional, total length: 1,030 mm, total width: 810 mm, total height: 2,290 mm, energy efficiency: B, input voltage: 400 V, DGUV certified until: 04/2027, type of input current: three-phase, warranty duration: 12 months, machine/vehicle number: 2026, Lillnord fermentation room Model: Maryline R 103-81 T Touch screen computer control Temperature range from max. + 20°C to + 45°C Humidity from 60% to 90% RH for max. 30 trays 600x 800 mm or 60 trays 600 x 400 mm PID regulation of humidity and temperature Water connection 3/4 inch stainless steel version Connection 400V, 3000 Watt, 16A-CEE plug Ijdpfjk Itizox Am Ioia Dimensions: 810 x 1030 x 2290 mm, WxDxH New device Lillnord service partners

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 27876, overall weight: 4,000 kg, total length: 7,000 mm, total width: 2,500 mm, total height: 2,700 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 08/04/26 and 16/04/26! TECHNICAL DETAILS Robot system: IRB 1400 M 2000 MACHINE DETAILS Operating voltage: 3 x 400 V Frequency: 50/60 Hz Connection: 4.5 kVA Iisdeyk Hlmepfx Am Ija Dimensions & weight L x W x H: 7000 x 2500 x 2700 mm Machine weight: 4 t External reference: 8

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, machine/vehicle number: 2026, Lillnord fermentation breaker Maryline Model: FR 103-81 T Touch screen computer control Temperature range from max. -18°C to + 45°C Humidity from 60% to 90% RH for max. 30 trays 600 x 800 mm or 60 trays 600 x 400 mm Cooling unit ready to plug in above Coolant R 134A / cooling capacity 937 watts PID regulation of humidity and temperature Water connection 3/4 inch stainless steel version Connection 400V, 4.4 kW, 16A-CEE plug Dimensions: 810 x 1030 x 2290 mm, WxDxH New device 12 months of warranty Option: - Door with thermal window - CO2 vaporizer - FlexBaker with ready-fermented products - Aggregate external Lillnord service partners Iisdpfek Iti Tox Am Ija

Condition: used, Year of construction: 2020, Orangeworks Stainless Steel Mixer Tank Qty 2 in stock Iisdpfswq Sz Uex Am Ioa Capacity 500 LTS Load cells Mixer Ancillary equipment included

Condition: used, Ex-Cell-O XG620 Excello XG 620 Siemens CNC overhauled 2011 docs available ball groove milling for CV constant velocity joints - homokinetic joints Isdpfxjurt Tlj Am Ijia This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation Iiedpfx Ajx Imqlom Ioa • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: ready for operation (used), Year of construction: 2018, operating hours: 400 h, overall weight: 34 kg, This 6-axis Universal Robots UR10e cell was manufactured in 2018. It features a load capacity of 10 kg and a range of 1300 mm. Weighing 33.5 kg, this robot arm is designed for tasks requiring precision and flexibility. Consider the opportunity to buy this Universal Robots UR10e cell. Contact us for more information. • Axes: 6 • Load capacity: 10kg Iodpfx Aex Tkbfjm Ioia • Range: 1300mm • Repeat accuracy: +/- 0.05mm • Rotation: 6-axis

Condition: new, functionality: fully functional, The filter cells (large), model ELBAZ0124L, by ISI Industrieprodukte for ISI / Elbaron electrostatic oil mist filters. 2 pieces, new and unused. For example, suitable for filtration in air technology installations and devices such as air conditioning systems, compressors, and paint spraying systems. Time-saving replacement option / temperature resistant up to max. 80°C. Suitable for, for example, ISI / Elbaron RH 2500 DV, RON4D1TR electrostatic filters. Price per piece: €990 net, ex stock, plus packaging costs. All technical information subject to errors and typographical mistakes. Ijdpeylk Arjfx Am Ieia We sell exclusively to countries within the European Union.

Year of construction: 2017, condition: ready for operation (used), Two welding cells are available, each with two KUKA robots, one for workpiece handling and one for the welding process. 1) Welding process: resistance spot welding, robot: 2x KUKA KR 60-3, max. payload: 60kg, max. reach: 2033mm, repeatability: +/-0.06mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 4500h/8200h. 2) Welding process: resistance spot welding, robot: KUKA KR300 R2500, max. payload: 300kg, max. reach: 2496mm, repeatability: +/-0.6mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 2700h/6100h. Documentation available. An on-site inspection is possible. Individual sale possible. Iisdpfxjyv H Exe Am Ioa

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, load capacity: 10 kg, arm reach: 1,418 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, input voltage: 230 V, type of input current: AC, repeat accuracy: 0.05 mm, warranty duration: 6 months, Equipment: documentation/manual, Mobile automation cell GEWA "RoboFlex 10", consisting of: - FANUC CRX10iA - R-30iB Plus Controller - Tablet Teach Pendant - BASIC base frame incl. 5 grid positions - without gripper (optionally available) The cell is located with us in the Eifel region and can be inspected under power by appointment. OPTIONAL: Connection of RoboFlex to your machine tool - Configuration of automation interface - Installation and commissioning - Operator training (2h) - Test run and handover to customer We are happy to provide you with an individual offer upon request. Iiodpfx Amoxrknme Isa

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm Iodpfx Ajwypqlem Ioia - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, Vacuum pump, vane pump, rotary vane pump ALCATEL type 100-132 No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Vacuum: 0.5 mbar (specification on the nameplate) Negative pressure: - 0.9 bar (determined during test run) Engine power: 3 kW Engine speed: 1420 rpm. mains connection: 400 Volt, 50 Hz Iedpfx Amjd A Srgj Ijia - Oil lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg sound condition

Condition: excellent (used), Dear Sir or Madam, We are pleased to offer you a manufacturing cell in very good used condition. The set comprises a total of 4 machines: – Traub TNL 26 – Gildemeister GD 32 – Star SV-20 – Star SR-32 including all relevant documentation, extraction systems, and accessories. Iiodpfx Amsyrypzo Ija Please feel free to contact us for a quotation.

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: 2735636, total height: 2,300 mm, total width: 2,230 mm, total length: 4,000 mm, overall weight: 3,500 kg, Equipment: cabin, Reis Robotics Welding Robot Cell SRV6-C (Year of Manufacture: 2003) Complete system comprising robot, positioner, and power source Robot – Reis SRV6-C Type: SRV6-C Manufacturer: Reis Robotics Year of manufacture: 2003 Robot weight: 200 kg ID no.: 2735636 Commissioning no.: 52 1050 Axes: 6 Typical application: MIG/MAG welding Positioner – Reis RND01 (Turntable) Type: RND01 Manufacturer: Reis Robotics Iiodpsyubygofx Am Isa Year of manufacture: 2003 Commissioning no.: 52 1050 Machine weight: 300 kg Function: Single-axis turntable / welding positioner Application: Holding and rotational positioning of welding jigs/fixtures Control: Integrated with the robot control system Control cabinet of the cell Type: SRV6-C Manufacturer: Reis GmbH & Co Maschinen-Fabrik Year of manufacture: 2003 Electrical connection: Voltage: 3~ 220/400 V Frequency: 50 Hz Connected load: 3 kVA Fusing: max. 5 A Pneumatics: Pmin: 5 bar Pmax: not used as per nameplate (no hydraulics present) Control cabinet weight: 125 kg Welding power source – Fronius TransPuls Synergic 4000 (TPS 4000) Manufacturer: Fronius Model: TransPuls Synergic 4000 (TPS 4000) Process: MIG/MAG / Pulsed arc / Synergic programs Compatible with Reis robot controllers Accessories: Torch kit Hose assembly Cooling circuit (external tank visible) Dimensions: 4.0 × 2.23 × 2.3 m (Robot welding cell in closed design) Operating hours counter: 29,593 h

Condition: used, Year of construction: 2015, TRUMPF - TRULASER CELL 7040 - 2015 - working range X 4000 mm - working range Y 2000 mm - working range Z 750 mm - laser source TruFlow 4000 Watt (Co2) - FocusLine - dynamic optics for thin materials focus distance 155 mm - dynamic optics for thick materials focus distance 240 mm - HERDING Fume extraction in working arrea 2000 Nm3/h - table for laser cutting 4000x2000 mm - 3D cutting head B = 135°, C = n x 360° - CNC automatic workpiece scanning - CNC automatic height detection - optics calibration device - cooling unit - automatic sliding door "CE" - automatic two-level redundant working range protection "CE" - partition wall for 2 side operation - CE certification Iisdpsy A Tquefx Am Isa - 3D Programming Module TruTops Cell - automatic Laser status indicator light - Siemens 840D CNC control

Year of construction: 2013, condition: used, Number of machnines 4 St Control Siemens Tool changer 1 Pos Plant Consists of 4 Machines Soraluce FR 9000I Soraluce RR 9000II Soraluce FP 8000 Soraluce PM 6000 Workpiece Setup Stations Replacement Pallets Automatic Tool Supply System (WBG) Automatic Pallet System Pallet Storage Rack The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About Us Iijdpfjyr Skkox Am Iea More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machines, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, This listing is for a Merck Millipore Scepter 3.0 Automated Cell counter The unit is in full working condition and is ready for immediate release The Scepter™ 3.0 Cell Counter is the only automated cell counter that's both portable and handheld. This compact device brings the accuracy and consistency of Coulter impedance counting directly to your culture hood, eliminating the need for bulky benchtop equipment. While traditional automated counters rely on vision-based systems, object recognition software, manual focusing, and clunky loading chambers, the Scepter™ 3.0 avoids all of these issues. It offers true automation without the risk of human or software error. Featuring a microfabricated, precision-engineered sensor, the Scepter™ 3.0 handles all aspects of cell assessment and calculation, delivering accurate and reliable counts in under 30 seconds. Features: Handheld, portable, and ergonomic design Uses the Coulter Principle for precise, reproducible results Compatible with two sensor sizes (40 μm and 60 μm) Displays cell concentration, average size, average volume, and histograms Ijdpfx Amexv D Dpe Ioia Stores up to 999 counts for PC download and further analysi

Condition: used, This listing is for a Instron 2518-807 Tension/Compression Static Load Cell. The unit is in full working condition and is ready for immediate release. The Instron 2518-807 Tension/Compression Static Load Cell is engineered for high-precision force measurements in a variety of testing applications. Its robust design allows for accurate tension, compression, cyclic, and reverse stress testing, making it an essential tool in materials testing and quality control environments. Key Features: Capacity: Measures up to 100N (22 lbf), making it suitable for a wide range of testing scenarios. Exceptional Measurement Range: Capable of capturing accurate force measurements down to 1/500th of its capacity, ensuring precision in all applications. Automatic Recognition: Features an electronic serial number and electrical calibration, allowing for simple and error-free operation without the need for manual setup. Integral Overload Protection: Designed with overload protection to minimize the risk of damage during both handling and testing, enhancing durability and reliability. Tare Weight: Offers a tare weight capability of 40% of the force capacity, which accommodates the use of various grips and fixtures for added versatility. Compliance with Standards: Fully compliant with international force measurement standards, including ASTM E4, ISO 7500-1 class 0.5, and JIS B7721, B7733, ensuring reliability and accuracy in testing protocols. Compatibility: The Instron 2518-807 load cell is compatible with various Instron testing systems, including the UT and 3300 series. Its versatility makes it ideal for applications in: Isdexxzndjpfx Am Ioia Materials Testing: Perfect for assessing the mechanical properties of materials under tension and compression. Quality Control: Utilized in industrial settings to ensure product consistency and adherence to specifications. Research and Development: An essential tool for scientists and engineers conducting experiments on material behaviour under different loads.

Condition: like new (used), Year of construction: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar modules Photovoltaic modules Electrical and mechanical safety testing Support for product development, design and quality control Detection of potential problems during development Quality and safety control  Endurance test stand  Temperature control  Mobile on rollers Entry pockets for forklift trucks Iiodpfxoh Rvh So Am Ioa 400 VAC, 3.PH, 50 AMP IR. 10,000 amp Year 2012 Weight 1400 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further test equipment - new and used - you will find in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2024, Capacity: 2.500 kN Specification: Threshold setting: Reading begins at 1% of capacity (75 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (3.750 kN) Sampling rate: Three measurements per second Iijdpfx Amofpwmpe Iea Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 185 L x 200 W mm, height app. 127mm Height sets to 5.0000" +/- 0.0005" Weight: app. 13 kg inckuding carrying box

Condition: as good as new (ex-display), Year of construction: 2024, Capacity: 5.000 kN Specification: Threshold setting: Reading begins at 1% of capacity (50 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (7.500 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 230 L x 190 W mm, height app. 180mm Height sets to 7.0000" +/- 0.0005" Weight: app. 32 kg inckuding carrying box with analog output Iodpfefpwk Rex Am Ijia

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm Ijdpfxsnr E Enj Am Isia with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.