Used Board Shear for sale (5,663)

Condition: ready for operation (used), Fanuc A20B-1000-0850 / 09B board, SN:128021, used, minor signs of wear, 100% fully functional, scope of delivery as shown in photos. Gjdpfxox Erh Dj Acmskd

Condition: ready for operation (used), Siemens GE 462007.1006.02 Board used 100% functional Gksdpezzhtrofx Acmod

Condition: new, Year of construction: 2026, The machine has 5 workstations: • Punching station • Flat bar shear • Angle bar shear • Notching station • Bar steel shear (round and square) Technical data Gksdpfjzzkv Ajx Acmsd Strokes per minute with 20 mm stroke: 40 /min Throat depth 500 mm Punching force 800 kN Hole diameter and thickness up to max. 40×14 mm Flat steel up to max. 450×15 or 300×20 mm Angle steel 90 degrees up to max. 152x152x13 mm Angle steel 45 degrees up to max. 70x70x7 mm Bar steel up to max. 45 mm Square steel up to max. 45 mm Notching up to max. 12 mm

Condition: like new (used), 2 unused blades for guillotine shear to standard quality → sold as used. Length = 3150 mm Width 1 = 66.5 mm Width 2 = 68.5 mm Thickness = 19 mm Through holes, D = 10 mm All further data can be found in the attached drawing. Gkodpfxez Aybkj Acmed

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 3 mm, Somo Guillotine Model: SCE 15/3 Capacity: 1500 x 3 Adjustment: Motorized Distance between uprights: 1580 Throat depth: 150 Used machine Gkjdpfx Acszmihzemod Internal code: SVR 430

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 1904150116, year of last overhaul: 2025, overall weight: 6,800 kg, We offer this used Forrec Granulator - 1000 R.A. rotary shear, year of construction 2019. Manufacturer: Forrec Model: Granulator - 1000 R.A. Gkjdpezmyufefx Acmed Year of construction: 2019 Condition: used Category ID: 552 Type ID: 2731 Machine type: rotary shear If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1969, machine/vehicle number: HS 205-4, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 900 mm, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 175 bar, overall weight: 2,500 kg, total length: 2,600 mm, total width: 1,950 mm, total height: 1,400 mm, Equipment: emergency stop, foot remote control, A Wila brand plate shear in very good condition. It is comparable to the Safan brand. The machine is somewhat older. The back gauge moves very smoothly, but currently needs to be adjusted manually. It does not have a drive mechanism. Gkedez Dgttjpfx Acmod

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 3 mm, SHEARING MACHINE CMLL 2050 X 3 MODEL 20.3 TYPE: C 3 MOTORIZED GAUGE USED MACHINE, IN WORKING ORDER Gjdpfx Acjz Sbtyomskd INTERNAL CODE: SVR 447

Condition: used, Hand lever shears, long blade sheet and round steel shears, lever shears, sheet metal shears, profile steel shears -Handover: in current condition as viewed Godpfx Asv Eakbecmokd -Hand lever: missing -Manufacturer: VEB Pels, lever shears, profile steel shears type HS 7 -Cutting insert length: 250 mm -Angle profile: see photos -Dimensions: 580/170/H600 mm -Weight: 76 kg

Condition: used, CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA, control plug-in cards printed circuit boards -Type: ESC-CI V1.60 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm Gkjdpfx Aenah Dcjcmed -Weight: 0.8 kg

Condition: excellent (used), PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board -Manufacturer: Mikron, Electronic module circuit board for operating unit TCD22, original packaging Gedek Aua Nopfx Acmjkd -Type: WW TCD 22 . 104.73.20.041 -Cardboard dimensions: 410/310/H65 mm -Weight: 0.6 kg

Condition: new, sheet length: 3040sheet thickness: 13,0total power requirements: 30weight approx.: 13,4messurements (LxWxH): 3850x3270x2260 Gjdpfx Aed Egqzocmjkd

Condition: new, Year of construction: 2026, controller manufacturer: CYBELEC CybTouch, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 600 mm, power: 10 kW (13.60 HP), 2 in 1 = shear + press brake in one machine with control CYBELEC CybTouch 15'' Gkjdpsd Huukofx Acmod shear capacity 3200 mm x 6 mm, throat 200 mm; press brake capacity 3040 mm, capacity 100 to; working hight 640 / 1240 mm, control CYBELEC CybTouch 15'', mot. back gauge 700 mm, shadow line, motor 7,5 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine with capacity L = 2200 mm or L = 1400 mm

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds Gkodpfx Acsu Rimmemsd - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: Gedpfxjudbzyo Acmskd General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Condition: good (used), punching force: 45 t, - Capacity 45 tons - Hydraulic - 4 stations - Foot control - Emergency stop - 400 V Gsdeu Havwjpfx Acmekd

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 30800 € 588.28 € 85 to 300 mm 5 40/15 bzw. 24x24 mm 450x15 / 450x18 mm 475 mm 130x130x13 mm 45/40 mm 12 mm 200x12 mm 9.2 kW 2300 mm 1200 mm 2100 mm 2400 kg hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V40 and V70 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch Godpfxjwiqtgj Acmekd

Condition: used, Year of construction: 2000, sheet length: 4.100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000New Price: approx. 100,000 EURO Condition: Used, very good condition Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: - Operating manual in GERMAN Gjdpfx Acjwiatvemskd - Machine and equipment comply with CE regulations

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 22400 € 430.08 € 80 to 300 mm 5 40/14 bzw. 24/24 mm 70 mm 40 1/min 450x15 / 300x20 mm 130x130x13 mm 45 mm 12x52x90 mm 9 kW Gsdpfx Acewirr Domskd 2310 mm 1200 mm 2050 mm 2070 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm standard hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photo shows mod. hyd 80 SD) option "Kit" EURO 970,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Further available models of HYD 80 series: model SD EURO 25.700,-- as model S but 500 mm gap weight 2.400 kg WE HAVE MORE THAN 700 REFERENCES!

Condition: new, Year of construction: 2025, neu 2025 090054 prompt, Zwischenverkauf v Spanien 17300 € 298.94 € 1 15570 € 55 to 250 mm 5 40/10 mm 20 mm 37 1/min 300x15 mm 120x10 mm 40 mm Gksdpfxowirxws Acmsd 10 mm 5 kW 1670 mm 1160 mm 2090 mm 1390 kg 2 foot pedal for independent working on 2 stations flatsteel station anglesteel station round- and square steel station rectangular notching station punching station table on flat steel station table on punching station table on notching station complete with hydraulic oil user manual in GERMAN and ENGLISH OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 19600 € 376.32 € 55 to 500 mm 5 40/10 bzw. 20/20 mm 20 mm 37 1/min 300x15 / 200x20 mm 10x42x90 mm 5 kW Gsdpfx Aewirgbscmskd 2100 mm 1160 mm 2090 mm 1750 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, Ankörnvorrichtung oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Gedpfx Asvaatlocmekd Condition:Used, in good condition

Condition: good (used), Heavy-duty electric tin snips Functional, ready for use Cutting width 2,000 mm Gsdpfjviubpjx Acmjkd Sheet thickness 8 mm Motor 7.5 kw

Condition: excellent (used), Year of construction: 2000, Diemer residual wood shear ASC 65 - 25 Infeed dimensions 650mm x 250mm with infeed vibrating trough Gksdpfx Acewu Nwnemod

Condition: good (used), Year of construction: 2007, machine/vehicle number: 3408, Offer 26249 Gsdjz Rmxkopfx Acmekd Technical data: - max. cutting width 2030 mm - max. cutting capacity at 45 Kp/mm² 6 mm - front angle stop - front support arms - rear stop 5 - 750 mm - foot pedal - drive 400 V / 4 kW - pneumatic connection 6 bar - space requirement approx. W 3600 x H 1250 x D 1900 mm - weight approx. 4 t