Machining center

BIESSE ROVER B1836 FT

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-261-04-5659, feed rate X-axis: 14 m/min, workpiece height (max.): 60 mm, controller model: Power Control Check 20+, grinding spindle motor power: 2,200 W, TECHNICAL DETAILS Panel height: 8 - 60 mm PVC/ABS thickness: 3 mm Pre-scoring depth for wood: up to 8 mm Feed speed: 8 - 14 m/min MACHINE DETAILS Control unit: Power Control Check 20+ Output per sanding motor: 2.2 kW Supply voltage: 400Y/230 V Njdpjydim Tjfx Adtjkt Phases: 3 Frequency: 50 Hz Full load operating current: max. 23 A Largest motor: 4.5 A Largest heating circuit: 3.1 A EQUIPMENT Electrically adjustable working length via CNC Lateral roller conveyor with idler rollers for panel support Coil holder plate Gluing unit for EVA adhesive with pre-filler and glue tank Edge pressure unit for straight profiles, with CNC-adjustable pressure rollers Indexing group with automatic tilt adjustment Overlapping milling unit with 2 motors Rounding unit with 2 multifunction motors (chamfering + rounding) with CNC automatic adjustment Edge scraper unit Glue scraper unit Brush unit

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-250-12-2554, workpiece height (max.): 80 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,000 mm, controller model: PC 85, TECHNICAL DETAILS Workpiece width min.: 250 mm Workpiece width max.: 3,000 mm Workpiece length min.: 100 mm Workpiece length max.: 1,000 mm Nedpfx Ajydnu Njdtokt Workpiece height min.: 8 mm Workpiece height max.: 80 mm Upper vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) Lower vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS Control: PC 85 Software: woodWOP 6 EQUIPMENT Safety enclosure for tool set 2 clamping chucks for securing and moving the workpiece during machining Loading bench with air cushion table Powered roller conveyor for panel discharge Capability for simultaneous processing of two panels

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 94464, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, controller model: XNC Numerical Control, TECHNICAL DETAILS Working Area X-Axis: 3,400 mm Working Area Y-Axis: 1,300 mm Working Area Z-Axis: 155 mm Number of Work Fields: 2 Tool Changer Positions (lateral): 3 Tool Changer Positions (chain): 20 Drilling Head Configuration: 10 vertical drills X-axis 12 vertical drills Y-axis Nodpfxsydkkgj Adtjkt 6 horizontal drills X-axis 2 horizontal drills Y-axis MACHINE DETAILS Control System: XNC Numerical Control Vertical Spindle Type: C-axis Vector, ISO 30 cone type EQUIPMENT Extraction pump 8 manually adjustable beams for suction cup support with display 8 pneumatic bakelite rails for panel lifting 3 manually adjustable suction cups per beam Front safety and protection system with mats Comprehensive safety fencing Motorized mat for chip removal

Condition: ready for operation (used), functionality: fully functional, feed rate X-axis: 14 m/min, workpiece height (max.): 55 mm, TECHNICAL DETAILS Panel height: 55 mm Solid wood: 8 mm PVC/ABS: 0.4 to 3 mm Feed speed max.: 14 m/min MACHINE DETAILS Control system: TS 200 touchscreen EQUIPMENT Adjustable working height Guide for panel infeed Side roller conveyor with free-running rollers for panel support Roller holder plate Glue application unit for EVA hot-melt adhesive with glue pot Edge pressing unit for straight profiles with adjustable pressure rollers End trimming unit with 2 motors and automatic tilt adjustment Milling/trimming unit with 2 adjustable tiltable motors Corner rounding unit with 2 multifunctional motors (milling + rounding) Nkedpfxeydirco Adtot Scraping unit for edge Scraping unit for glue Brush group

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 50 kg, working height: 80 mm, working width: 1,300 mm, working length: 2,500 mm, TECHNICAL DETAILS Working length: 300 - 2,500 mm Working width: 60 - 1,300 mm Working height: 10 - 80 mm Maximum workpiece weight: 50 kg MACHINE DETAILS Nkodpfx Aeydlk Ijdtjt Working height: Up to 1,300 mm Dimensional tolerance readability: ±0.15 mm Tool change: NC-controlled Programming: PC - TPA Albatros software Operating system: Windows 7 Professional EQUIPMENT Machining on 6 sides of the panel Double-section chain – X axis patent Linear, circular, and spiral interpolation Double zero point reading Mirror program management Turret tool diameter optimizer Optimizer for independent spindle diameter DXF file conversion (geometric conversion) Import of work lists in ASCII format Additional key for programming from the office Gun-type barcode reader 17-inch LCD monitor Panel loading and handling via motorized vertical comb feed with rollers Height reading system with independent axis Thickness measuring system with mechanical probe Brushless motors with programmable speed control via NC Drilling unit with independent vertical and horizontal spindles Upper turret milling unit with 10 positions Automatic lubrication 180° panel transfer and rotation system Discharge system with motorized belt

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 57269, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,205 mm, controller model: NC 1000, TECHNICAL DETAILS Nedpfxsydkdge Adtskt X-axis working range: 4,300 mm Y-axis working range: 2,205 mm Vertical spindle: 1 unit, HSK F63 Tool changer system: 8 positions (head) Tool changer system: 21 positions (rear, chain) Drilling head: BH 20 Vertical spindles on X-axis: 8 units Vertical spindles on Y-axis: 8 units Horizontal spindles on X-axis: 4 units Horizontal spindles on Y-axis: 4 units Saw unit on X-axis: diameter 120 mm Saw unit on Y-axis: diameter 120 mm MACHINE DETAILS Control: NC 1000 Software: Biesse Works Weight: 400 kg EQUIPMENT FT nesting table with full surface Automatic loading system with side lift table Automatic labelling machine for barcode printing Automatic printing and dispensing system for adhesive labels Automatic unloading system with motorized conveyor belt Front safety and protection system with mats and fences Automatic lubrication system Air conditioning for control cabinet Vacuum pump

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,380 mm, travel distance Z-axis: 250 mm, controller model: Xilog Maestro, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Working Area X-Axis: 3,680 mm Working Area Y-Axis: 1,380 mm Working Area Z-Axis: 250 mm Spindle Speed: 24,000 rpm Number of Working Zones: 2 Number of Adjustable Bars: 6, 1,300 mm Number of Pneumatic Bakelite Bars: 4 Number of Adjustable Suction Cups: 3 Nksdjydmbnjpfx Adtst Front Tool Changer System: 10 positions Rear Tool Changer System: 16 positions F 12L Vertical Drilling Head Spindles: 8 F 12L Horizontal Drilling Head Spindles X-Axis: 2 F 12L Horizontal Drilling Head Spindles Y-Axis: 2 MACHINE DETAILS Electrospindle: 12 kW, HSK 63F Vacuum Pump: 250 m³ Control System: Xilog Maestro EQUIPMENT Tecpad Mobile Console Bar Worktable Laser Line for Virtual Zero Positioning on Y-Axis Prisma KS 5-Axis Vertical Electrospindle Tool Group Blades for Groove Cutting Pro-Speed Safety System Front Guard and Safety System Automatic Lubrication System

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 55595, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 60 mm, overall weight: 3,000 kg, controller model: Xp 600, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Working Area Y-axis: 1,000 mm Working Area Z-axis: 60 mm MACHINE DETAILS Nodpfxjydk Rme Adtokt Control: Xp 600 with Biesse Works Software Weight: 3,000 kg EQUIPMENT Automatic loading system with motorized belt conveyor 2 clamps for securing and transporting the panel 1+1 vertical electrospindle (lower + upper) with 3 axes 1+1 independent saw (lower + upper) 29 + 29 independent spindles for vertical drilling in X and Y direction (upper + lower) 10 + 10 independent spindles for horizontal drilling in X and Y direction (upper + lower) Automatic unloading system with motorized belt conveyor

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, overall weight: 128 kg, ambient temperature (max.): 46 °C, pressure (max.): 13 bar, MACHINE DETAILS Weight: 128 kg Max. air pressure: 13 bar Nkjdpfx Aoydnyxedtjt Max. ambient temperature: 46 °C

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Production line consisting of the following components: Motorized comb with multiple positions Vertical machining center Bremen Vektor Motorized panel handling system Vertical machining center Bremen Vektor Motorized transfer unit Motorized return conveyor TECHNICAL DETAILS Motorized comb length: 2,000 mm Vertical machining center Bremen Vektor Drilling head: 1 with 7 horizontal spindles in X, 16 vertical spindles in Y Pantograph: With turret tool changer for 8 positions Horizontal drilling unit: 1 for stop drilling Motorized panel handling Return: With 180° rotation and THK guide rails Length: 2,500 mm Vertical machining center Bremen Vektor Automatic infeed: By motorized chain and vertical pressure rollers Working height adjustment: Automatic via CNC Storage containers: 5 for hinges/buffers/tie rods Motorized transfer unit Output: From vertical to horizontal towards operator Length: 2,000 mm Motorized conveyor Njdpfx Ajydlapodtokt Return: To operator EQUIPMENT Computer, keyboard and mouse 15" monitor CD-ROM Automatic infeed by motorized chain and vertical pressure rollers Automatic working height adjustment via CNC

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 77503, feed rate X-axis: 25 m/min, workpiece height (max.): 60 mm, overall weight: 6,510 kg, controller manufacturer: SINTRA, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm Nkjdpfx Aoydidrsdtst PVC / ABS: 3 mm Max. feed speed: 25 m/min MACHINE DETAILS Control: Sintra Weight: 6,510 kg EQUIPMENT - Sanding unit - Coil holder magazine with 2 positions and automatic edge change via CNC - Adhesive unit for EVA hot-melt glue with preheating device and glue pot - Preparation for adhesive unit for PUR glue - Pressure group for straight profiles with electronically adjustable pressure rollers via CNC - End trimming unit with 2 motors and automatic tilt adjustment - Filler unit with 2 vertically aligned motors - Edge smoothing unit with 2 swivelling motors - Multifunctional 4-motor corner rounding unit (smoother + corner rounder) with numerical control in automatic adaptation - Anti-stick unit - Adjustable edge scraper unit - Glue-saving unit - Oscillating brush unit - Electronically adjustable working height - Motorized rubber belt with increased pressure - Motorized and electronically adjustable panel guide - Side roller conveyor with idler rollers for panel support

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0-200-03-8334, feed rate X-axis: 24 m/min, workpiece height (max.): 60 mm, controller model: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Njdpfxjydiyms Adtokt Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fusing: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Electronically adjustable working height via CNC Powered, rubberized conveyor belt with increased pressure Panel support guide Lateral roller conveyor with idler rollers for panel support Sanding unit Infrared lamps for panel edge preheating Six-position coil holder magazine with automatic edge change via CNC EVA hot-melt gluing unit with premelter and glue pot Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with two motors and automatic tilt adjustment Overlapping cut-off / milling unit with two motors Glue / milling unit with two tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (smoothing + rounding) with CNC control, automatic adaptation Provision for integrating an additional working station Edge scraping unit Oscillating brush unit

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, working width: 1,100 mm, working length: 2,350 mm, machine/vehicle number: 8081.02, TECHNICAL DETAILS Working length: 2,350 mm Working width: 1,100 mm Max. processing thickness: 35 mm EQUIPMENT Nsdpfx Adoydn Nmetekt double working surface cutting device for the sheet to be processed

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AL/008514, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, controller model: PC mit Xilog Plus Software, workpiece height (max.): 60 mm, overall weight: 2,800 kg, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,000 mm Workpiece thickness (processable): 60 mm Upper drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW Lower drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW MACHINE DETAILS Control: PC with Xilog Plus software Weight: 2,800 kg EQUIPMENT Panel clamps Nkedpeydl Adofx Adtjt Manual workpiece loading on Flotex table Automatic workpiece unloading Automatic central lubrication

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-09-5124, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, controller model: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working range: 6,000 mm Y-axis working range: 1,650 mm – up to 1,750 mm for milling Max. travel height during edge banding: 60 mm Max. applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C Vector: 11 kW, HSK F63 Edge specification: Rolls, PVC / ABS 0.4 - 3 mm EQUIPMENT 10 adjustable support rails for vacuum cups Loading and unloading aid with 8 pneumatic rods Vacuum cup positioning with laser system Edge banding unit with 360° rotation, glue pot, and preheater for granular EVA glue Rubber-coated pressure roller + Rubber-coated pressure roller Nsdpsydl Nwsfx Adtokt Preheating lamp Edge trimmer and edge scraper Edge holder magazine Front and side safety system with carpets Protective cage around access area Chip extraction with motorized conveyor belt Air conditioning for machine control cabinet Automatic lubrication system Vacuum pump

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, working width: 2,400 mm, working height: 32 mm, working length: 800 mm, TECHNICAL DETAILS Working width X-axis: 267 - 2,400 mm Working length Y-axis: 120 - 800 mm Working height Z-axis: 16 - 32 mm 2 upper drilling heads + independent Y-axis grooving consisting of: Left head with 15 vertical spindles in X and Y-axis + one blade for grooving Right head with 15 vertical spindles in X and Y-axis + one automatic hinge installation unit 2 independent lower vertical drilling heads in Y-axis each with 5 + 5 independent spindles Nkjdpjydn A Tofx Adtjt MACHINE DETAILS Control: Numerical control with WoodWop software EQUIPMENT Automatic loading system with motorized roller conveyor Tank with vibrator for hinge storage and automatic feeding Unloading system with automatic roller conveyor

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0-261-20-5976, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Solid wood edge thickness: 12 mm Feed speed: 20 m/min MACHINE DETAILS Control system: POWER CONTROL PC 20+ Operating current at full load: max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Fuse: 35 A Njdjydihdjpfx Adtskt Frequency: 50 Hz EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Jointing unit Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear corner rounding unit with 2 motors Edge scraper unit Glue scraper unit Brushing unit

Condition: ready for operation (used), functionality: fully functional, working height: 60 mm, working width: 850 mm, controller model: POWER PC 85 + WOODWOP 6.0, working length: 3,050 mm, TECHNICAL DETAILS Working dimensions: 3,050 x 850 mm Working height: 12 - 60 mm Drilling Head Vertical spindles X-axis: 8 Vertical spindles Y-axis: 5 Horizontal spindles X-axis: 4 Horizontal spindles Y-axis: 2 Milling Head Nksdpoydmcrjfx Adtst Axes: 3 Tool change: Automatic Diameter of integrated saw unit: 100 mm MACHINE DETAILS Control: POWER PC 85 + WOODWOP 6.0 (updated in 2023) EQUIPMENT 4-position tool changer

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11165/1, working width: 1,300 mm, workpiece height (max.): 40 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. processable thickness: 40 mm EQUIPMENT Drying system with 3 UV lamps Nksdpfx Adjydn S Istjt Transport system with motorized rods Separate control cabinet

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, controller model: Ferrocontrol DARC, TECHNICAL DETAILS Upper drilling heads: 3 Drill spindles per head: 36 Nksdpfxjydn Ezj Adtot Vertical pantographs: 2 Working dimensions: 2,500 x 800 mm MACHINE DETAILS Control: Ferrocontrol DARC EQUIPMENT Electronic drilling machine Automatic loading system with motorized roller conveyor Automatic hinge insertion system Unloading and transport roller conveyor with automatic stop

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: H/32059, feed rate X-axis: 22 m/min, workpiece height (max.): 50 mm, TECHNICAL DETAILS Nkedsydibwspfx Adtjt Panel height: 10 mm to 50 mm Solid wood: 12 mm PVC/ABS: 0.4 mm to 3 mm Max. feed speed: 22 m/min Min. panel length: 150 mm Min. panel width: 70 mm MACHINE DETAILS Rectifier group motors: 1.5 kW (2 motors) EQUIPMENT Touchscreen control for adjusting working units Panel support guide Side roller conveyor with idler wheels for panel support Anti-adhesive unit Roll holder plate COMBIMELT glue unit for hotmelt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressing unit with segmented pads Trimming unit with 2 motors Cleaning unit with 2 motors Rounding unit Edge scraper unit Working height adjustable electronically via C.N. Powered rubberized conveyor with top pressure

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: AII 31.3506, power: 22 kW (29.91 HP), pressure (max.): 7.5 bar, rotational speed (max.): 3,000 rpm, MACHINE DETAILS Power: 22 kW Engine Engine power: 30 kW Max. speed: 3,000 rpm Free air delivery: 83 l/s Nsdjydnxuspfx Adtekt Final pressure: max. 7.5 bar

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 01-2142-054, travel distance X-axis: 4,200 mm, travel distance Y-axis: 2,100 mm, TECHNICAL DETAILS X-axis travel: 4,200 mm Y-axis travel: 2,100 mm MACHINE DETAILS Vertical electrospindle: 9 kW Nsdpoydi Nusfx Adtjkt Tool changer capacity: 6 positions EQUIPMENT Nesting worktable PC-based numerical control system ALPHACAM user interface software Alphacam nesting software Automatic unloading system with motorized conveyor Label printing and application system with labeler Perimeter safety fence Safety system with front safety mats Automatic lubrication system Air conditioning unit for cooling and cleaning the machine control