Used Bezel for sale (159)

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Nedpfx Ajvca Rcokiewn Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: used, lunette, steady rest, lynette Njdpfsuqf S Rjx Akiewn -Clamping tool: clamping bracket -Clamping width: 83 mm -Dimensions: see photo technical drawing -Dimensions: 100/72/H83 mm -Weight: 1.2 kg

Condition: used, lunette, steady rest, lynette Nodpfxeuqf Tue Akijwn -Clamping tool: clamping bracket -Clamping width: 95 mm -Dimensions: see photo technical drawing -Dimensions: 109/57/H157 mm -Weight: 1.2 kg

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 95 mm -Dimensions: see photo technical drawing -Dimensions: 110/60/H98 mm Nedpfjuqf S Dsx Akiown -Weight: 1.3 kg

Condition: good (used), Bezel, setting stick, lynette -Bench: for crankshaft grinding machine Nedpfowv Na Sjx Akiewn -Peak height: 170 mm -Dimensions: see photos -Dimensions: 205/115/H220 mm -Weight: 11.1 kg

Condition: good (used), Bezel, moving bezel, bezel, steady rest, lynette -Bezel: moving -Centre height: 185 mm -Edition: Brass -Dimensions: see photos / technical drawing -Dimensions: 345/70/H370 mm Nwsdpoxn I Tljfx Akijn -Weight: 7.7 kg.

Condition: used, Bezel, stick, lynette Nwjdpfx Aked S Iyzjien -Max. Passage: Ø 128 mm -Edition: gunmetal -Dimensions: 500/85/H740 mm -Weight: 35 kg

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 268 mm -Groove width: mm -Dimensions: see photo technical drawing -Dimensions: 285/85/H180 mm -Weight: 10.8 kg Nwodpfx Akov Sqmtjien

Condition: new, power: 270 kW (367.10 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab * Mechanical cab suspension * Passenger seat: cinema-style with fabric upholstery * Adaptive Cruise Control with FCW and AEBS-3 * Lane Change Warning System * Goodyear * Emission Class Euro 6 * Automated transmission, TraXon, 12 gears * Standard component layout * Fuel tank on the left * PACCAR Connect * Warranty Plus - Powertrain, 3 years / 500,000 km Options * LED headlights, cornering and fog lights * Windshield with sun protection film * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler for Day Cab * Mirror housings black * Cab color - roof spoiler * Color of headlight bezel: cab color * Color of bumper: cab color * Steering wheel with silver accents * Door panel: loosely woven fabric * Driver's seat: Luxury Air * Driver's seat armrest * Dashboard table * Cooler box or refrigerator * Automatic cab climate control * Auxiliary heater with waste heat recovery and timer * Roof hatch with electric operation * ECAS remote control with extended functions * Preparation for toll system * Digital tachograph, VDO 1C, Version G2V2 * Speed limiter set to 90 km/h * DAF Infotainment Luxury Plus, Luxury speakers * Wireless charger * Rear warning system * Front: 8.00 t, air suspension, 161 N * Front air suspension: medium * F1,315/70R22.5GO KMAXS2 156/150 L Steering CBB * R1,315/70R22.5GO KMAXD2 154/150 L Traction CBA * MX-11 engine, 270 kW / 367 hp, cab emblem: 370 Nwedpor Sn Nnefx Akijn * 12-speed TraXon transmission 12TX2010 DD, 16.69-1.00 * Rear axle ratio 2.47 * Mechanical differential lock * MX engine brake * Parking brake assistant * Wheelbase 5.10 m / rear overhang 2.75 m * Longitudinal member 260/7.0 mm, continuous internal reinforcement * Suitable for use with a drawbar, nameplate, up to max. GVWR * Cross member D137 + Rockinger coupling D130 * Pneumatic connection for trailer, swivel coupling * Electrical connection for trailer, 24 V / 15-pole * Tail lift application One-day registration from 03.12.2025 Body: ZIKUN Swing-Board I body Loading length: 6,650 mm Load length: 6,800 mm Loading width at rear portal: 2,480 mm Loading width i.L.: 2,480 mm External width: 2,550 mm Loading height i.L.: 2,100 mm Loading height: approx. 1,177 mm Overall height unladen: approx. 3,479 mm Subframe: stable lightweight construction made of pressed steel sheets Front wall: made of special vehicle construction plastic panels, closed up to under the roof, with a central strut, laid in flush. Side walls: ZIKUN flap swing mechanism. Roof: solid roof consisting of steel spars with permanently glued aluminum sheets. Powder-coated in RAL 9010 Pure White Ram protection: welded steel ramming bar on both sides as ram protection. PVC fender at the rear axle 1 set of splash guards for same Holder for chock block + 2 chocks Red position lights above the tail lift Contour marking on the side in white, at the rear in red Anti-spray mats in the rear fenders Painting: The entire body is sandblasted, primed and painted or powder-coated in a single color. Subframe and body: DAF W9815WHTE Integrated load securing system with CRS system (4 rows) in the roof and floor, including 4 load securing beams with 6 horizontal spring telescopic rods (CRS system Ancra-Jungfalk, Dekra tested according to VDI 2700 Code XL) Folding step, adjustable on each side, 2 adjustable folding steps in the swing wall underbody on the left and right, approx. 600 mm long. Pallet edge protection on the left and right Interior lighting as LED spotlight mounted at the top rea

Condition: used, Bezel moving, moving bezel, steady rest, lynette -Bezel: driving Nodpfxsd N E Nuj Akijwn -Max. Passage: Ø 120 mm -Center height: 150 mm -Drawing: with the photos -Dimensions: 280/390/H470 mm -Weight: 18.5kg

Condition: good (used), Bezel, moving bezel, steady rest, lynette -Bezel: max. aperture Ø 145 mm -Centre height: 190 mm -technical drawing: in the photos -Dimensions total: 310/115/H340 mm -Weight: 21.6 kg Njdpjwuqqiofx Akiswn

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 20 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,4 - 3,0 mm thread - inch 10 - 44 TPI thread - module 0,2 - 12,5 mm connected load frequency 230 V total power requirement 1,0 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel Nedpsrfd Thsfx Akiewn - Splash guard - Feed protection

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning speeds 75 - 2000 U/min centre height 160 mm spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 V total power requirement 1,5 kW weight of the machine ca. 0,29 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Nwsdonq Sayjpfx Akisn Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 272 mm Nwjdpfewyvbwex Akisn -Holes: Ø 24 mm -Dimensions: see photo technical drawing -Dimensions: 300/125/H50 mm -Weight: 8.9 kg

Condition: used, Moving bezel, moving bezel, resting stick, lynette -Manufacturer: TOS for lathe type SUS80 -Max. Passage: Ø 200 mm -Plating: brass -Top height: 230 mm -Drawings for the photos Nsdodcpiwjpfx Akiswn -Quantity: 1 piece -Dimensions: 530/200/H740 mm -Weight: 100kg

Condition: good (used), Moving bezel, bezel, setting stick, lynette Nwodskwg Eqepfx Akien -Bezel: riding along -Peak height: approx. 100 mm -Edition: Brass -Dimensions: see photos -Dimensions: 200/50/H300 mm -Weight: 3.3 kg

Condition: good (used), Bezel, moving bezel, steady rest, lynette Nwedpjwcdvzsfx Akien -Bezel: moving -Tip height: see photos for dimensions -Plating: Brass -Dimensions: 170/80/H275 mm -Weight: 2.9 kg

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 260 mm turning length 1500 mm turning diameter in the gap 570 mm turning speeds 45 - 1800 U/min centre height 210 mm spindle bore 52 mm Nsdjy Ehxxspfx Akiown tailstock quill taper MT 4 MK connected load frequency 400 V total power requirement 3,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool

Condition: good (used), Bezel, moving bezel, steady rest, lynette -Bezel: moving -Centre height: 145 mm Nwodpev Sqwrjfx Akien -Plating: Brass -Dimensions: see photos / technical drawing -Dimensions: 400/130/H380 mm -Weight: 13 kg.

Condition: good (used), Moving bezel, bezel, setting stick, lynette -Bezel: riding along -Peak height: 100 mm -Edition: Brass -Technical drawing: see photos Nedpfx Akjiw Eqreiewn -Dimensions: 180/30/H245 mm -Weight: 2.5 kg

Condition: good (used), Bezel, steady rest, lynette Nsdpfx Ajv Rmt Tjkijwn -Steady: for crankshaft grinding machine -Dimensions: see photos -Dimensions: 420/110/H270 mm -Weight: 20.8 kg

Condition: new, turning diameter over bed 280 mm turning diameter over slide rest 158 mm turning length 600 mm turning speeds 45 - 2000 U/min centre height 140 mm spindle bore 26 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,25 - 2,5 mm thread - inch 6 - 96 TPI connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,16 t dimensions of the machine ca. 1,26 x 0,58 x 0,60 m Professional metal lathe, gearing machine - 3-jaw chuck - 4-jaw chuck - hardened bed tracks - Clamping plate - 4-way chisel holder - Feed protection - standing and rotating bezel Nwedpovu Hanjfx Akisn - Splash guard - Machine light

Condition: used, Bezel, stick, lynette -Max. Passage: Ø 160 mm -Tip height: mm -Edition: gunmetal Nedpoddfhvefx Akijwn -technical drawing with the photos -Dimensions: 500/85/H740 mm -Weight: 38 kg

Condition: good (used), Bezel, setting stick, lynette -Quads: for bezel, 3 pieces -Diameter: 40 mm -Length: 170 mm -Groove: 7.7 mm -Weight: 4.2 kg Nsdpfx Aohf Nh Sskijwn

Condition: used, Bezel, stick, lynette Njdpfx Aod Tpkuekiown -Max. Passage: Ø 235 mm -Tip height: 310 mm -1 holder is missing -Technical drawing: in the photos -Dimensions: 630/125/H690 mm -Weight: 58 kg