Used Belt Saw Machine for sale (70,269)

Condition: new, The bSander 75.200 & 150.200 are industrial belt sanders designed for grinding pipe ends and profile ends, as well as for edge sanding and face sanding on the top surface of the machine. bSander 150.200: Belt dimension: 150 x 2000 mm Belt speed: 29 m/s Drive power: 4.0 kW//3x400 V//50Hz Kdsdpsd Dp Aaefx Ampsk Dimensions L x W x H: 700 x 530 x 1130 mm Weight: 90 kg ---€900 net until end of week 15--- bSander 75.200: Belt dimension: 2000 x 75 mm Belt speed: 29 m/s Drive power: 3.0 kW//3x400 V//50Hz Dimensions L x W x H: 700 x 490 x 1130 mm Weight: 72 kg Price on request

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW Kjdpfxei D Di So Ampjdk TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, A universal mobile belt grinder designed for grinding/polishing elements that may be impossible to transport due to their size or weight. Machine description Excellent device stability. Adjustable depth stop Easy and convenient operation Designed for grinding/polishing elements that are difficult to transport due to their dimensions Kdodpfxjvu Unmj Ampsk Highly effective in grinding or polishing welds near the floor Technical parameters Motor (kW) 2.8 Contact wheel (mm) 195x150 Steering roller (mm) 195x150 Flat grinding (mm) 150x450 Tape size (mm) 2000x150 Belt speed (mm) 15/30 m/s m/s Working height (mm) 475-1240 Weight (kg) 85 Packaging (cm) 750x1100x800

Condition: new, Year of construction: 2025, Grinding machine with a wide area of application. Material can be ground both at the front and at the back of the machine. It includes two band speeds: 15/30 m/s as well as a mounting system with sturdy prismatic jaws for tubes, flat and square materials. 100×2000 mm grinding belt, 3,3 kW motor. Machine features Clamping system with sturdy prismatic jaws for tubes, flat and square materials Comfortable and simple handling Easy and quick grinding roller replacement Large grinding surface in the upper part of the machine for e.g. deburring or surface grinding 2 belt speeds Stable, vibration-free base 2 dust containers and an anti-dust system for the grinding surface Technical data DIAMETER OF GRINDING 20 - 76.1 mm ADJUST THE ANGLE 30 - 90 ° BELT SPEEDS 860/1720 m / min Kodpfx Amsvxhv Sjpsdk POWER 2.5 / 3.3 kW BELT DIMENSIONS 100x2000 mm GRINDER DIMENSIONS 1340x700x1210 mm WEIGHT 159 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Kodpfxjwq A Dyo Ampjdk Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Kodow Nacvspfx Ampjdk Technical data: Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at rip fence 1250 mm Length stop on cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, horizontal glass belt machine with roller table Kdodpfx Aoymxpvsmpek belt size : 100 x 3000 mm

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm table size 620 x 480 mm cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm saw band speed 22-125 m/min. infinitely variable motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds - saw table tiltable +/- 15 - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear Kdjdpoiv A U Ejfx Ampsk - substructure made of U-steel 100 x 50 mm , movable with lift truck space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg good condition

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition Kdedpfx Aodzp T Dempek The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: excellent (used), Belt sander Make Karnasch Type ALMI AL 100 with 6 different contact rollers or sanding rollers Ksdpfsuf N Scox Ampodk Diameter : 17,5 - 20 - 22 - 28 - 38 - 48 mm belt width 100 mm length 2000 mm Grinding range for grinding diameter 20 - 76 mm

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm Kjdpfx Amsw R Hh Ujpodk - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: used, Manufacturer: AMADA, Tape speed. 0-31 m / min Ksdpfeyyhvgsx Ampsdk

Condition: excellent (used), functionality: fully functional, Two-belt skinner Brand Maja Belt width 380mm Dimensions 1900x800x1150mm Kdodpfx Amov T R Uaspsk

Condition: new, Year of construction: 2026, Engine power: 21 HP Splitting force: 20 tons LONCIN engine Operating pressure: 16 - 20 MPa Cylinder: Ø101.6 x 610 mm Maximum log diameter: 480 mm Maximum log length: 610 mm Cycle time: 6 - 8 s Return time: 3 s Splitting wedge: 6 arms OREGON guide bar: 22" Chain: 74 links, 0.75" Saw/splitter drive: hydraulic motor/gear pump Conveyor belt: 6800 x 250 x 4 mm Tires: 13" Shipping dimensions (W x L x H): 2250 x 1000 x 1200 mm Ksdpfx Ameyx D Dwspjdk Gross weight: 790 kg Splitting force 20 tons – efficient work with larger logs. Combustion engine – independence from mains power and field operation. Hydraulic feed and pressure – stable material guidance and increased safety. Ejector angle adjustment – ​​precise control of ejected material. Hydraulic guide and lift adjustment – ​​convenient adjustment of the working position. Cutting and splitting function – one device for two key stages of wood processing. Robust construction – durable frame for intensive use. Ergonomic operation – intuitive operation and comfort of use. Universal application – suitable for field use, firewood processing, and heavier work. Wedge, 8-piece knife - price €130 (paid additionally). Wedge, 4-piece knife - price €100 (paid additionally). Hydraulic log feeder for firewood processors - price €1,150 (paid additionally).

Condition: reconditioned (used), functionality: fully functional, Hydraulic sharpening machine for frame saws. Grinding wheel diameter 250 mm. 4 built-in, switchable tooth profiles. 3 feed speeds. Ksdpjyvtqnsfx Ampjdk

Condition: new, Year of construction: 2025, Cutting length: 2500 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut stop: 1565 mm (telescopic extension up to 2550 mm) Cutting depth: 170 mm Scoring cutter: no Sawblade height adjustment: handwheel Sawblade pivot adjustment: handwheel Width stop adjustment: manual Sawblade angle indicator: scale Cutting height indicator: - Width stop indicator: scale Crosscut ruler indicator: scale Sawblade diameter: 500 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 9.2 kW Kodoqx Igqjpfx Ampodk Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 2900 mm Machine width: 1800mm Weight: 800kg

Condition: used, Year of construction: 2005, Carriage length: 3200 mm Cutting width at the width stop: 1300 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 150 mm Scorer: Yes Saw blade height adjustment: electric / position control Swivel adjustment saw blade: electric / position control Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: Digital Kdjdeuix Egepfx Ampjk Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 450mm Speeds: 3 Motor power: 7.5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3500mm Machine width: 2200mm weight: 1000kg

Condition: new, Year of construction: 2022, Cutting length: 2500 mm Cutting width at the width stop: 1250 mm Cutting width at the crosscut fence: 2550 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: electric Pivot adjustment saw blade: electric Width stop adjustment: electric Kdodpfx Ameid Igqspsk Display saw blade angle: digital Display cutting height: Digital Display width stop: Digital Display cutting ruler: Digital Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 1000kg

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at the width stop: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Kedpshpl Unofx Ampjdk Saw blade height adjustment: electric Pivot adjustment saw blade: electric Width stop adjustment: electric Display saw blade angle: digital Display cutting height: Digital Display width stop: Digital Display cutting ruler: Digital Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 1000kg

Year of construction: 2022, condition: as good as new (ex-display), Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 170 mm Scorer: yes Saw blade height adjustment: hand wheel Pivot adjustment saw blade: hand wheel Width stop adjustment: manual Display saw blade angle: scale Cutting height display: - Display width stop: Scale Display cutting ruler: Scala Saw blade diameter: 500mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Kdjdpfx Amjid Ig Aopjk Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 900kg

Condition: used, Kaltenbach saw, cutting machine, mitre saw, metalworking circular saw, used machine Manufacturer: KALTENBACH Model: KKS Machine No.: 21139 Electrical specifications: 400 V Weight : 1200 kg aprox. Cutting speeds (blade peripheral speed): Kdjdpsyfnpisfx Ampok Z59 tooth count: • 1st gear: 17 m/min • 2nd gear: 34 m/min Z72 tooth count: • 1st gear: 14 m/min • 2nd gear: 28 m/min Z90 tooth count: • 1st gear: 11 m/min • 2nd gear: 22 m/min

Condition: new, width of the strips 75 mm band length 2000 mm Kjdpfx Aeirwwlompjdk band speed 30 - 34 m/sec total power requirement 4,1 HP weight of the machine ca. 75 Kg dimensions of the machine ca. 1,2 x 0,5 x 0,85 m Industrial floor belt sander with the following advantages: - Danish top quality - Separate emergency stop - Motor brake - Reliable - Simple and practical operation - Simple adjustment - Easy and quick sanding belt change without tools - 5 year guarantee on the motor - Optimum safety

Condition: excellent (used), Setting machine for CV saws Vollmer model AGSB up to diameter 1.100 mm Kdjdpfxeywz Dlj Ampjk

Condition: excellent (used), HSS saw chamfering machine LOROCH model BK450 Kedpfxeywzvbs Ampjdk

Condition: new, grinding band dimension 150 x 2000 mm band speed 33 m/sec weight of the machine ca. 105 kg engine output 4 kW turning speeds 2800 U/min Accessories / equipment: - Vibration-free running smoothness Kedsyv N Agjpfx Ampodk - Adjustable working height - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connection piece for double suction - Built according to the CE standard