Used Belt Saw Machine for sale (70,396)

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. Giodpfefibd Tsx Ai Nju The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from Godpfx Aefibfaji Njiu

Condition: new, NEBES TM 275 Band Saw Machine - 400 v Three-phase NEW "CE" Gjdpfx Ajh Nm Ncoi Nsiu INDUCTION motor Cast iron structure Adjustable cutting angle from 0° to 60° All cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tensioning gauge Front controls and two cutting speeds Deviator for exclusion of coolant pump Blade guide with carbide skids (H.M.) Round cut 0° 220 mm Square cut 0° 200 x 200 mm Flat Cut 0° 230 x 185 mm Round cut 45° 150 mm Square cut 45° 150x150 mm Flat Cut 45° 150x200 mm Round Cut 60° 90 mm Square Cut 60° 90x90 mm Flat Cut 60° 90x120 mm HP 1.3 Voltage 400 V Blade size 2450 x 27 x 0.90 mm Weight 265 kg

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Gsdpfx Aefh R Tyoi Noiu Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: new, NEBES TM 210 BELT SAW - Single-phase 230V Cast iron structure Adjustable cutting angle from 0° to 60° All cast-iron frame with large rapid vice and handwheel for clamping the workpiece Gjdpfsi Ezq Djx Ai Neiu Electric pump for blade lubrication and cooling Blade tensioning system with disc springs and oil-bath blade tensioning gauge to ensure constant tensioning Two cutting speeds and induction motor 0.03 mm accuracy on h 100 of cutting Cutting Capacity : 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight : Kg 179

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 Giedpfofibfgox Ai Neu 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm Gisdped N H A Njfx Ai Neu miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, Technical details: grinding wheel diameter: 240 mm saw blade diameter: 600 mm total power requirement: 1,1 + (0,37 kW) kW weight of the machine approx.: 600 kg Saw Blade Sharpening Machine Machine performs grinding process automatically Giodju Ng Edepfx Ai Nju saw blade continue to move automatically grinding wheel diameter: max.: 240 mm driving motor for feed (0,37 KW) *

Condition: used, Year of construction: 1980, Technical details: rpm spindle (continous): 2000 - 2500 U/min Gedsu Ng I Espfx Ai Nsiu double strokes/min.: 25; 37; 50; 75; 100 H/min. Grinding-wheel diameter: Ø 250 mm work height max.: 1350 mm total power requirement: 2,7 kW weight of the machine ca.: 1,0 t dimension machine xH: 0,85 x 1,0 x 1,8 m Use for medium to larger metal circular saws from 250 - 1450mm. Saw blade attachment Ø 60 to Ø 80mm and shaft Ø 31,5mm Tooth pitch up to 42mm Tooth depth adjustment via scale Front cutting tooth: can be chamfered on both sides up to 45° and overcut at pitch 0.02mm *

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable: 1.0 / 1.6 kW Godpfezb Ngzsx Ai Neiu 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting range at 90 degrees with a blade size of 360 mm: round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades --> --> Special price: EUR 4,000.00 net, free on board!

Condition: good (used), Code: 0021 Brand: BOHR - AUSTRIA Model: 150/330 Sanding pad for belt sanding machine Gijdpsi Art Eofx Ai Nsu Universal sanding pad for belt sanders in graphite for solid wood and veneer - mm 330 x 150 Overall dimensions mm 330 x 150 x 100 h Weight kg 4

Condition: used, Year of construction: 2001, Used Kuhlmeyer Long Belt Sander Model ZBS 2 Technical Specifications: Year of manufacture: 2001 Brand: Kuhlmeyer The machine is connected to power and can be inspected by appointment! Weight: 2,000 kg Connected voltage: 400 V Connected load: 4.5 kW Control voltage: 230 V Rated current: 12 A Frequency: 50 Hz Gjdpey R Rlrofx Ai Noiu Compressed air: 6 bar

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Technical data: Gisdpfjy Uwpxox Ai Nou - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm - Miter adjustable: 30° - 90° - 30° - at 45°: round 150 mm - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm - Hydraulic material backstop clamping device - Micro-spray cooling system - Original infeed roller conveyor: 4000 mm - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg

Condition: excellent (used), Belt sander Make Karnasch Type ALMI AL 100 Gedpfx Aisuf N Sco Noiu with 6 different contact rollers or sanding rollers Diameter : 17,5 - 20 - 22 - 28 - 38 - 48 mm belt width 100 mm length 2000 mm Grinding range for grinding diameter 20 - 76 mm

Condition: used, Year of construction: 1991, machine/vehicle number: 113307651086088, functionality: fully functional, cutting height (max.): 260 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, saw band length: 4,115 mm, saw band width: 38 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Additionally, a chip conveyor is integrated to increase efficiency. Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Machine weight: 2,110 kg Gijdpfx Aiswqw Tvo Nju Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Condition: used, Year of construction: 1989, band width 150 mm band length 3500 mm band speed 30 m/sec Scheiben-Ø 400 mm grinding feed 0 - 5 m/min work piece revolutions 0 - 140 U/min power capacity - workpiece power 2,2 kW grinding diameter 100 - 600 mm clamping length 6000 mm Giodpfx Aioyw Tkkj Neu bed length ca. 8000 mm voltage 380 V / 50 Hz motor speeds: 1450 U/min power capacity 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 8,6 x 2,6 x 2,5 m

Condition: new, Year of construction: 2026, Working width: 600 mm Working height: 220 mm minimum workpiece length: 250 mm aggregates: 4 1. saw-cutting aggregate Random System: saw-cutting optics 2. brush : metal, diameter 220mm 3. brush : Tynex grit 60, diameter 220mm 4th brush : Tynex grain 120, diameter 220mm Height adjustment: hand wheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power saw-roughening gate: 1,1 kW Motor power brushes: 4 kW Motor power feed: 0,37 kW Machine length: 2800mm Gijdpohwrp Refx Ai Neu machine width: 1500mm Machine height: 1600mm Weight: 1500kg

Condition: used, Wegoma table saw machine offered. Gedpfsgmb Agox Ai Noiu Type: TS 250 For more information call us or send an e-mail.

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment and technical specifications: - Usable WORKING WIDTH mm: 950 - SANDING BELT LENGTH mm: 670/970 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATING ROLLER mm: 150 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER HP: 10 - BELT SPEED m/s: 18 - FEED MOTOR POWER HP: 0.75 - Variable speed feed conveyor with infinitely adjustable speed, m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Swiveling ROLLER for belt tensioning - 2 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER TABLES each with 2 rollers at infeed and outfeed - 1 EXTRACTION CONNECTION with 160 mm diameter - AUTOMATIC TABLE POSITIONING BASIC MACHINE ACCORDING TO CE STANDARD PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system The machine model with this system has been running non-stop since 2008 without lateral belt drift! Including special equipment: 11 kW motor Gedpfx Aey I Eqwsi Njiu Pneumatic sanding pad incl. feed-synchronized control Location: Flörsheim Availability: short notice

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Godpovxi Ddofx Ai Neiu Machine width: 2200mm weight: 1000kg

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned Gsdpfx Asy Erxvoi Noiu - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Giedpfx Aijxzfqbj Nou Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 220 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander Gedpfx Ajxaatusi Neiu - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 200 mm Giodpjxaapvofx Ai Neu band length 1490 mm band speed 8.0 m/sec motor 400 Volt loading area 500 x 280 mm total power requirement 1.5 kW Dimensions (HxWxD) 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW Gjdpfexaappsx Ai Njiu motor 400 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German