Used Beading for sale (224)

Condition: used, Used Netzsch model LMZ2 stainless steel bead mill with associated parts. Unit has stainless steel peg style rotor and stainless steel jacketed chamber. Unit driven by 7.5hp, 230/460volt, 1770rpm, 3/60 electric motor with transformer. Unit includes mechanical seal. Approximately 2 litre capacity. Unit includes feed pump and control panel. All mounted on stainless steel base. Nwedpfx Aaox Niwqj Eer

Condition: used, functionality: fully functional, color: black, Year of construction: 2015, S4.10 The S4.10 is our self-levelling floor screed installation that is assembled on a four-axle truck chassis. The machine features a 10 m3 sand and a 13 m3 cement compartment. By loading sand at the building location this machine combines a high daily productivity level with limited storage space. Bremat S4.10 – Key Features Njdpfx Aaex Hh Rqo Eswr • Fully automatic system for producing and pumping self-levelling floor screed & bead screed. • Mounted on a truck chassis with large sand (≈10 m³) and cement (≈13 m³) compartments. • High productivity thanks to automated dosing, mixing, and pumping. • Horizontal production system for stable, level material flow even in tight or uneven areas. • Efficient on-site logistics, allowing direct sand loading at the jobsite. • Customisable configuration for different project needs.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: Nedpewcq Hgefx Aa Ejwr - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: used, This listing is for a VWR Pulsing Vortex Mixer 945323 Glass bead cell disruption/homogenisation Continuous or touch modes Microprocessor controls LED display for speed and time Nedpfx Aoxzh Naja Ejwr

Condition: used, Year of construction: 2011, Available from October 2025 1st Urban AKS 6405 - Year of construction 2011 - Min. welding dimension: 323 x 382 mm - Max. Sealing dimension: 2300 x 2520 mm - Applied profile systems: Veka Softline 70, Topline 70, Swingline 70, Softline 76, Softline 82, Topline NL, Softline NL, Alphaline 90, Topline Plus - Weld bead limitation 2 mm (no stainless steel blades) - Operating system: Windows XP Nedpfjulfxasx Aa Ejwr 2nd Urban SV 530 - Year of manufacture 2005 - Incl. Urban WT turning station + cooling station - Operating system: DOS (complete PC replaced in 2023) - Various components replaced (DARC V05-10-20 supply module in 2018) - Cutter for 2.5 mm groove (no V-groove)

Year of construction: 2022, condition: new, For sale is a hammer mill for the production of powdered goods in the spice / herb / food industry! Structure: 1 piece hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the rear wall 2 pieces flushing ports into the rotating part of the mill Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord Inside the housing a sieve basket with crusher, from the outside the sieve can fix Bottom centered an outlet with appropriate connection flanges Motor 400/680 volts; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. sieve according to your choice 3 pcs. The rotor is also in V2A design, (beater with 96 platelets) Rotor can be turned 180°, in addition, the beater platelets can be turned 1 time. For this purpose, we recommend balancing after turning. 1 piece feeding screw for hammer mill with gear motor with 1,2 kW screw equipped with two cleaning balls at the hinged lid lid is equipped with lid switch and tumbler insertion hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for infinitely variable speed control speed display beater 3 PTC thermistor sensors as protection against overheating of the motor. Sensor for vibration protection Integration of cover switches Switch cabinet in stainless steel Emergency stop, main switch 1 piece Cooling or heating jacket on the rear wall of the mill housing Welded seams pickled and glass beads blasted on the outside. Steel parts, such as motor and motor console primed and painted according to RAL 1013. Attention: It must be ensured that no metal parts enter the mill! Total price of the plant described above price 145.000 € superstructure: 1 piece Hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the back wall 2 pieces of flushing connections into the rotating part of the mill. Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord Njdpfopz H D Iex Aa Eowr In the inside of the housing a sieve basket with crusher, from the outside the sieve can be fixed At the bottom in the middle an outlet with a corresponding connection flange. Motor 400/680 Volt; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. screens of your choice 3 pieces rotors The rotor is also in V2A design, (beater with 96 plates) rotor can be rotated by 180 the beater plates can be turned 1 time. be turned. For this purpose, we recommend balancing after turning. 1 piece Feeding screw for hammer mill with gear motor with 1,2 kW Screw equipped with two cleaning balls on hinged lid lid is equipped with lid switch and tumbler feeding hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for stepless speed control speed indicator beater

Condition: used, Used Oliver & Batlle model HM-15 stainless steel bead mill. Has stainless steel jacketed chamber which measures approximately 450mm long x 250mm diameter. Approximate total capacity 15 litre (product dependent). This equipment has a stainless steel rotor belt driven by 18.5kw, 415volt, 3/50, 1460rpm motor. Nwjdpfxox Hv Udj Aa Ejr Click on the link below to see a video of the machine running.

Condition: good (used), Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic Nsdsr A H R Tspfx Aa Eowr -Dimensions: 890/600/H1670 mm -Weight: 198 kg

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain Nodpfx Aaex Aq Axj Ejwr - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Year of construction: 1998, condition: used, Power: 30 kW (41 HP) Manufacturer : Buhler Machine model: K60 Number: SRB 220 Year: 1998 Type: Bead mill / grinder with conical slot agitator.   Dynamic pressure compensation in the mixer Cooling system for stator, rotor and separation ring. Grinding chamber volume: 4.8 dm3 / 4.8 liters Grinding chamber filling volume: 6.4 dm3 / 6.4 Litres Pressure system swept volume: 2.5 dm3 / 2.5 Litres Power rating: 30 kW Nwedpfx Aaox Akbne Ejr Variable speed drive   Sold with progressive cavity pump PCM 2.6L10 Documentation available Product example : paints, pastes, …  

Condition: used, Year of construction: 2010, functionality: fully functional, Corghi Master 26M Tyre Changer Manufacturer: Corghi Model: Master 26M Label on housing: "Artiglio Master 26" Year of manufacture: 2010 Serial number: 0-11103612/0000 - 16 Code: CGF044898 Nsdpox I Ebpefx Aa Eewr Technical Specifications: Power supply: 230 V AC / 16 A / 1 phase / 50/60 Hz Rated power: 1 kW Operating pressure: 10 bar / 145 psi Weight: 465 kg Lifting capacity (sticker): The label states "MAX. Lifting capacity 65 kg". Key Components (visual inspection): Equipped with analogue WIKA pressure gauge and digital display Control panel with joystick and button operation Pneumatic bead breaker and mounting tool Integrated wheel lift system with roller platform Condition (visual only): CE marking present on the type plate Multilingual safety stickers attached to the main column

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Nodpfswq Sv Eex Aa Ejwr Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: used, Year of construction: 2021, plate thickness 2.5 mm throat 260 mm distance between roll centers 92.0 mm weight 295 kg range L-W-H 1200 x 700 x 1200 mm Nodpox A H T Tjfx Aa Eowr Equipment: - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: good (used), Bead mill, agitator mill, shredder, crusher, grinder -Spare parts: 1x bead mill sieve, 1x bead mill screw, 1x bead mill wheel (see pictures) Nwsdpsiqu R Defx Aa Eer -Dimensions: 500/500/H165mm, 480/480/H175mm, 370/370/H70mm -Weight: 74 kg net complete

Condition: good (used), Year of construction: 2009, operating hours: 44,287 h, functionality: fully functional, X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 44,287 hours Control system: Bosch PNC-P Standard equipment: Machine - Stable, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions including 2 clamps - Drives with maintenance-free three-phase motors - Reloading device with programmable hold-down device - Ball tables - Part chute 180 x 150 mm - Automatic shut-off Punching head - Hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down device - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming Control system - Open control system based on Bosch PNC-P - Control panel with 15" TFT color screen - Program management - Integrated Technology Data - Teleservice Data Transfer - USB Interface and Network Connection Safety - CE Marking - Multi-Beam Light Barriers - Hydraulic Quick Shutdown + Multitool Function + MultiShear Function + MultiBend Function + Thread Forming Function Njdpfx Aswlifmja Eswr + Marking/Fast Beading Function + Deburring and Rolling Technology Function + Soft Punch Function + Movable Support Table + Part Slide Sensor + Vibration-Dampened Installation + 2nd Stop Pin + Bow Detection

Condition: used, This listing is for Illumina Array BeadXpress DNA Bead Array Reader Illumina’s new BeadArray Reader simultaneously scans Sentrix Arrays at two different wavelengths with a resolution of less than one micron. A scan of 96 hybridized samples in an Array Matrix, representing data acquisition from over 4.5 million discrete beads, takes less than 90 minutes. This represents the highest throughput of any scanning platform used for microarray-based genetic analysis applications. The BeadArray Reader offers broad dynamic range, high sensitivity, and a low limit of detection. These metrics are particularly important for users planning to study gene expression and other applications that are supported by BeadArray technology and that demand high scanner performance. Can be refurbished on request, refurbishment not included in price. Nwsdpfsxzh Ayjx Aa Esr

Condition: used, Year of construction: 2001, functionality: fully functional, 1. Bead Winder – Gadsden • Enclosed winding machines with yellow safety covers • Multiple rotating winding discs and wire guides • Integrated control panels with push buttons, indicator lights, and emergency stop switches • Mechanical winding stations mounted on heavy steel frames • Visible wire feeding pathways and guiding elements 2. Bead Extruder – Davis Njdpox Itzqefx Aa Eowr • Extruder assemblies with screw and barrel sections • Downstream guiding and forming components • Control cabinets and local operator panels • Auxiliary equipment including heating/control units and material conveying components • Safety devices integrated into the system 3. Carousel and Loader Robots • Articulated industrial robot arm from ABB (orange) • Rotary carousel stations with multiple indexed holders • Safety fences enclosing robot work areas • Integrated control panels next to the robot cell 4. Coil Winding Equipment • Multiple wire pay-off and take-up reels aligned in series • Tension and guide rollers • Winding stations mounted on steel frames • Clearly separated parallel winding positions

Condition: ready for operation (used), Year of construction: 2001, operating hours: 62,769 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Sheet thickness: 8 mm Punching force: 220 kN Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm MACHINE DETAILS Control: Siemens Machine weight: approx. 17,500 kg Operating hours: 62,769 h EQUIPMENT Scraper position change monitoring Thread forming Marking – quick beading Slitting Multishear Multibend Backgauge repositioning Njdpfx Aex I E Ezja Eowr Roller tools Setup cassettes Ball transfer table

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Nwjdpfx Asxnlgcsa Ejr

Condition: used, Weinig Profimat 23 planer and moulder for four-sided planing and profiling of wood with tools and an additional glazing bead saw for window production. spindles: 5 spindle 1: Below spindle 2: Right spindle 3: Left spindle 4: Upstairs spindle 5: Below spindle 6: Glasleistensäge working width: 230 mm working height: 120 mm Total performance: 28 kW Nwodpexc Hhwjfx Aa Eer Rated current: 60 A

Condition: good (used), Year of construction: 2023, operating hours: 5,001 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control: TRUMPF Control based on Rexroth IndraMotion MTX Machine: - Closed machine frame - Hybrid axis system - Linear magazine with 24 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning with programmable hold-down device - Foot pedal for clamp closing - Parts chute on the right Nodpfx Aaexxbwxj Ejwr Punching Head: - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch lubrication spray system - Punch slug extraction - Forming function - Stroke counter for punches Control: - TRUMPF Control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Programmable cutting gas pressure - Automatic shut-off - Remote support interface - Program management - Production planning Data Transmission: - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Dual-beam safety light curtain Extended Standard Equipment: - 1st positioning pin (inside right) + Brush tables + MultiTool + Thread forming with thread counter + Thread-former breakage monitoring + Lubricant level monitoring + Marking/rapid beading + Deburring and rolling technology + Adaptive stroke calibration + Die lubrication spray system + Smart Punch Monitoring + Parts flap on the left + Parts conveyor belt for parts flap left + Collection tray for parts conveyor left + Sensor for parts chute + Parts conveyor for parts chute right + Additional clamp + 4x individually openable clamps + 4x height-adjustable clamps + Automatic clamp closing loading sensor system + Optical loading sensor + Automatic repositioning movement to compensate for loading tolerance + Repositioning device for DeltaDrive + Vibration-dampened installation + Chip conveyor with tilting bin + Machine status light + Warpage detection + Wireless Operation Point SheetMaster Compact 3000 x 1500 (AK05): - Loading station with spreading magnet for sheet separation - Suction frame - Vacuum sensors - Double sheet detection - Unloading cart for residual grids and microjoint sheets - Second operator station for loading and unloading + Compact setup for light grid and reference point system + Peeling system SortMaster Compact: - Machine-integrated automated small part removal - Suction frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction bars (each suction cup individually controllable) - Unloading area 600 x 800 mm - Vacuum sensors for the suction circuits + X-axis extension - Extension of the unloading area to 1200 x 800 mm

Condition: used, This listing is for 1 of 4 Liferiver EX3600 Extraction System. The unit is in full working condition and is ready for immediate release. The Liferiver EX3600 is a cutting-edge, fully automated nucleic acid extraction system designed to enhance laboratory efficiency and convenience. Here’s a detailed overview of its standout features and applications: Key Features: - Versatile Sample Volume: The EX3600 can process a wide range of sample volumes, from 20 to 200 microliters, making it suitable for diverse applications and sample types. Nwjdpexxyf Iefx Aa Ejr - High Throughput: Capable of handling up to 24 samples in a single run, the EX3600 significantly boosts productivity, particularly in high-demand research environments. - User-Friendly Interface: The integrated LCD screen provides clear, real-time monitoring of the extraction process, allowing users to easily track progress and make adjustments as needed. - UV Sterilization: Equipped with a UV lamp, the system ensures sterilization of the working area, which is crucial for preventing contamination and maintaining sample integrity. - Quick Processing Time: The entire nucleic acid extraction process takes approximately 20 minutes, enabling rapid turnaround for critical experiments, such as those in diagnostics or research settings. - Magnetic Bead Technology: Featuring a magnetic bar for efficient handling of magnetic beads, the EX3600 streamlines the extraction process, reducing manual intervention and minimizing errors. Applications: - Whole Blood and Plasma: Ideal for clinical applications, particularly in genetic testing or infectious disease diagnostics. - Serum Samples: Useful in biomarker discovery and research. - Cells: Supports cellular research and analysis. - Food Samples like Milk: Perfect for food safety testing and microbiological analysis. - Fecal Samples: Essential for studies in microbiome research or gastrointestinal health. - Specialized Use: - The EX3600 is particularly effective for extracting viral RNA, making it a valuable tool in the fight against infectious diseases, including COVID-19 detection. Trained laboratory personnel can prepare samples before utilizing the automated system, ensuring consistent and reliable results.

Condition: used, Year of construction: 2005, functionality: fully functional, (1) Bead apexing line (1), including AFC, conveyor belt, drum applicator, grinding conveyor, extruder Nwedpex Itmyefx Aa Eer

Condition: used, Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead removal or other planing tasks, with automatic workpiece return to the operator. spindles: 4 + 2 working width: 230 mm working height: 120 mm spindle 1: 7.5 kW / 50 mm / 8,000 rpm spindle 2: 11 kW / 50 mm / 8,000 rpm Nwsdpfsx An R Tox Aa Ejr spindle 3: Common motor with spindle 2 / 50 mm / 8,000 rpm spindle 4: 7.5 kW / 50 mm / 8,000 rpm Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm feed: 5-24 m/min service: PC Control Nexus NC axes: Unimat 2 & 3, Uniplan 1

Condition: used, This listing is for a Sartorius Stedim Palletank Cubical Jacketed-Mix 200L Storage Tank. The unit is in full working condition and is ready for immediate release. Unit is supplied with x2 Sartorius 200L STD Plastic Palletank and dolly. Nsdpoxxybvjfx Aa Ejwr The Sartorius Stedim Palletank Cubical Jacketed-Mix 200L is a high-performance storage and mixing solution designed for biopharmaceutical applications. Engineered for compatibility with Sartorius single-use mixing systems, this temperature-controlled stainless steel tank provides efficient liquid handling, precise temperature control, and optimized mixing performance. Key Features: - Jacketed Temperature Control – Ensures precise heating or cooling for sensitive bioprocess applications. - 200L Capacity – Ideal for medium-scale liquid storage and mixing in GMP environments. - Ergonomic Design – Front doors allow for easy bag installation and port gates facilitate tubing and sensor integration. - Integrated Pro Mixer Compatibility – Railed port enables quick coupling of the mobile Pro Mixer drive unit in under a minute. - Optimized Draining System – Sloped bottom board ensures high product recovery without manual bag manipulation. - Weighing Function Option – Allows for precise volume control, preventing aggregate formation and ensuring product quality. - Visual Inspection Windows – Side windows enable real-time process monitoring during mixing. - Surface Finish Options – Available in Bead Blast or ASME #4 brushed finish for enhanced corrosion resistance and cleanability. Specifications: Model: Palletank Cubical Jacketed-Mix 200L Capacity: 200 Liters Material: Stainless Steel Jacket Type: Temperature-Controlled Jacket Mixing Type: Integrated Pro Mixer Compatibility Drainage System Sloped Bottom for High Recovery Application Storage & Mixing for Bioprocessing Compliance GMP, Biopharma Standards Benefits: - Precise Temperature Control – Maintains optimal conditions for biologics and cell culture media. - Efficient Mixing – Designed for homogeneous blending of process liquids, buffers, and media. - Enhanced Process Control – Weighing and volume control prevent aggregate formation. - Easy Integration – Compatible with Sartorius Flexsafe® Bags & Biostat® Systems. - Ergonomic & User-Friendly – Front door access and port gates for seamless tubing and sensor installation. - Durable & Hygienic – Stainless steel GMP-compliant construction with highly cleanable surfaces. - Applications: - Biopharmaceutical Manufacturing - Cell Culture & Media Preparation - Buffer & Reagent Storage - Vaccine & Protein Processing