Used Band Saw Sharpening Machine for sale (92,454)

Condition: used, Horiz. Mitre bandsaw KNUTH with minimum quantity lubrication type HB 250A Bandsaw for metalworking with swivel saw frame. Serial no. 201603004 Year of manufacture 2016 Sawing range at 90° round Ø 225 mm Sawing range for 90° square 190 x 190 mm Sawing range for 90° rectangle 245 x 150 mm Sawing area at 45° round Ø 145 mm Sawing area for 45° square 145 x 145 mm Sawing area for 45° rectangle 200 x 145 mm Sawing area at 60° round 90 mm Sawing area at 60° square 90 x 90 mm Sawing area for 60° rectangle 110 x 70 mm Saw band 2480 x 27 x 0.9 mm Roller diameter 290 mm Belt speed 45 / 90 m/min. Compressed air requirement approx. 5 bar (minimum quantity lubrication) Working height 910 mm Motor power 1.1 kW Connected load 400 Volt, 50 Hz - Saw blade speed via 2-stage electric motor - Infinitely variable lowering via hydraulic lowering cylinder - Automatic limit stop after material average - Infinitely variable swivel saw arm for mitre cuts up to 60° - Pressure gauge for band tension - Vice with short-stroke quick clamping device - Coolant device with electric pump - Minimum quantity lubrication UNI-Microspray I (year of manufacture 2017) - Workpiece stop Space requirement L x W x H 1450 x 700 x 1450 mm Iedpfx Aasrvm Npecsbc Weight 185 kg Very good condition

Condition: good (used), Year of construction: 2006, Immediately available - affordable Hydraulic Band Saw Automatic Manufacturer: Kasto Model: TWIN A 2 Year of manufacture: 2006 Length: 1,755 mm Width: 2,475 mm Height: 1,570 mm Total weight approx. 1,700 kg Total drive power 5 kW Saw motor drive power 3 kW Cutting range Ø 260 mm Cutting range, flat (W x H): 260 x 260 mm Smallest round dimension Ø 10 mm Square, H x W: 10 mm Maximum single feed length: 750 mm Multiple feed up to: 9,999 mm Shortest cut-off length: 6 mm Smallest diameter to be cut: 10 mm Ijdpfx Aoxdag Neacsbc Minimum remnant in single cut: 15 mm Shortest remnant length in automatic mode: 100 mm Cutting speed, steplessly adjustable: 20 - 100 m/min Saw blade dimensions: 4,530 x 34 x 1.1 mm Material support height: 700 mm Cutting feed: steplessly adjustable Data subject to verification Comes with: • Floor pan (under the machine) • Chip conveyor • Operating manual • Additional machine table (support) in front of the unit Immediately available ex stock 78234 Engen

Condition: excellent (used), Band saw setting machine PEDRIELLI model PG Iodpfx Aov Uzhyoacsbc

Condition: used, Year of construction: 2008, functionality: fully functional, Used fully automatic band saw from premium manufacturer Behringer. The saw was only recently purchased, but unfortunately is far too large for our applications. Description of Behringer HBP 413A Machine Description: Behringer HBP413A High-Performance Band Saw The Behringer band saw HBP413A is an economical, fully automatic metal cutting band saw designed for automated 90° cuts in professional industrial and manufacturing environments. The HBP413A offers a cutting capacity for round material from 10 mm to 410 mm and for flat material from 10 x 8 mm up to 500 x 400 mm, using a saw blade dimension of 5,800 x 41 x 1.3 mm. The frequency-controlled saw drive delivers 4 kW drive power and continuously adjustable cutting speeds from 20 to 140 m/min (66 to 459 ft/min). Cutting speed can be set and read at the control panel. The total drive power is approx. 7 kW. Weight: 2,350 kg Dimensions (LxWxH): 1,950 x 2,950 x 2,550 mm Saw blade dimensions: 5,800 x 41 x 1.3 mm Cutting range round: 10 - 410 mm Cutting range flat: 500 x 400 mm Cutting speed: 20 - 140 m/min Saw feed control Saw frame adjustment Weight: 2,350 kg Dimensions (LxWxH): 1,950 x 2,950 x 2,550 mm Saw blade dimensions: 5,800 x 41 x 1.3 mm Cutting range round: 10 - 410 mm Iodpfx Aaoxdc Snocjbc Cutting range flat: 500 x 400 mm Cutting speed: 20 - 140 m/min The machine is available immediately. Exchange for a smaller band saw with a maximum round cutting capacity of 280 mm, as well as a trade-in, is also possible (with value adjustment).

Condition: used, 1200064 Cutting machine for grinding small circular saw blades. saw blade ø: max. approx. 300 mm Saw blade ø: max. approx. 300 mm Iedpfxsulfftj Aacobc

Year of construction: 1985, condition: good (used), Offer 21135 Technical data: - Roller diameter 420 mm - throat 410 mm - max. passage height 265 mm - table size 600 x 600 mm - table left + right tiltable 15 / 30 ° each - table height from floor 1020 mm - saw blade length 3150 - 3260 mm - saw blade width 3 - 16 mm - 8 cutting speeds approx. 18 - 562 m/min - drive 400 V / 1,1 / 1,7 kW - Weight approx. 650 kg - Space requirement approx. W 900 x H 1900 x D 1000 mm - E. foot switch Isdpfx Aajg Aid Socjbc

Condition: ready for operation (used), Rolling machine for band saw blades up to 270 mm width, both pressure rollers driven via internal intermediate gear, new E-motor, V-belt and switch Ibedjlt Uvaspfx Aacsc

Condition: new, Band saw machine Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Section (round): 225 mm Ibjdpfjdynpcex Aacec Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste -Coolant system -Manual

Condition: excellent (used), Band saw grinding and setting machine VOLLMER model BN30TS Iedpfx Aehhdaxoacsbc

Condition: good (used), Year of construction: 2009, functionality: fully functional, cutting range round steel at 90°: 300 mm, - Saw band dimensions: 3660 x 27 x 0.9 mm - Max. cutting range round: 300 mm Ibsdpfxjxgbq Uj Aacjc - Max. cutting range flat: 320 x 220 mm - Roller feed with electric length stop up to approx. 800 mm - Incl. roller conveyor approx. 4 m

Year of construction: 1982, condition: used, Circular saw blade sharpening machine Loroch JLM 36 Iedpfx Aocq Ngheacobc

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw band dimensions 5090 x 34 x 1.1 mm - Cutting speed steplessly adjustable 17 - 90 m/min - Hydraulic lifting – lowering of the saw frame Iedpfxjwpincj Aacjbc - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed – roller conveyor 7000 mm - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Condition: used, Year of construction: 1977, functionality: fully functional, Saw blade sharpening machine Schmidt ASG 500 A - Good used condition Ibodpfx Aowwky Asacsc - Year of manufacture 1977

Year of construction: 2022, condition: as good as new (ex-display), 1 semi-automatic high-performance horizontal bandsaw with double column guidance and 2° cutting inclination to the table support surface Make:BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Ibsdom Rg H Repfx Aacjc Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform IMMEDIATELY AVAILABLE

Condition: excellent (used), Deburring machine for band saw blades IDEAL model SM60 to remove the residual welding bead. Ibsdpfxexk Tb Tj Aacsc

Condition: used, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Ibsdpfxsxn Itro Aacoc Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. WARNING! THE MACHINE IS RETURNED, SERVICED, NO PACKAGING.

Condition: new, Year of construction: 2025, We offer machines / spare parts / accessories for the saw blade grinding machines of the type ECE 45 / ECT 502 / EC 400 / EC 500 / ASG 1400 / ASG 2000 from the manufacturer "Schmidt Tempo". With our many years of experience, we can also provide support with repairs for the above-mentioned machine types, including spare parts. NEW: Grinding spindles, used or new, are available for ECE 45 / Freestyle, ECT 502, ECT 632/633, ASG 1400, ASG 2000, AS 9-12, AS 2-4, ASG 400/500, G400/500. Ijdpfxoguxgpj Aacjbc For specific inquiries, please contact us by phone or email.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm Ibodeq Evn Espfx Aacsc - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Condition: refurbished (used), Year of construction: 2007, Technical Description Machine for producing or regrinding carbide saw blade flanks - Option to install a 3-pallet loader Diameter: 80 to 800 CNC: 840DI SIEMENS CNC axes: Siemens Simodrive 611 - Oil mist extraction - Automatic blade measurement and grinding wheel compensation - Variable spindle speed - Integrated measuring system - Integrated modem for remote diagnostics and user assistance - Stable, vibration-reducing cast iron construction - Highly user-friendly and easy to program thanks to a new Windows-based user interface/system SOLD WITH 3-PALLET LOADER Options: Profile editor: Allows you to quickly and easily generate any tooth flank shape Iodpewkdwuefx Aacobc The machine will be completely rebuilt upon receipt of the order. Approximately 3-4 months

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm table size 620 x 480 mm cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm saw band speed 22-125 m/min. infinitely variable motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds - saw table tiltable +/- 15 - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear Ibedpfx Aoiv A U Eeacsc - substructure made of U-steel 100 x 50 mm , movable with lift truck space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg good condition

Condition: excellent (used), Large automatic setting machine for band saw blades. Automatic work cycle. Choice of type Iedew Hup Hspfx Aacjbc of setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. High-yield in very little workspace. Complete with base and with rod and roller to support saw blades.

Condition: used, Year of construction: 2025, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Ibjdpfxewl Ea To Aacjc Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Technical data Cutting band size 2360×27×0.9 mm Band tension mechanical (manual) Band speeds 22, 33, 45, 65 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Power supply 3-phase 400V Main motor power 1.1 kW Weight 190 kg Angle 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Machine construction Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. WARNING ! 3 ITEMS AVAILABLE: 1. MACHINE IS RETURNED, SERVICED, ASSEMBLED (poz.519) 2. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER ,COMPLETE, ASSEMBLED (poz. 518) 3. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER AND BELT COVER, ASSEMBLED (poz. 517)

Condition: new, Year of construction: 2025, S275 Metal Cutting Machine Motor Iedexdbzbspfx Aacobc Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Ibsdsd Sr Sijpfx Aacsc

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Ijdpfx Aajudi Unecobc Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100