Used Ballet Packing Machine for sale (92,405)

Condition: used, functionality: fully functional, High production machine speed of 500 cans/minute. -Made of stainless steel AISI-304 and AISI-316. -Touch screen control for changing operating parameters (speed, weight, packaging, etc...). -Packing Weight change without reformatting. -Using cans of different heights without reformatting. -General Electric and pneumatic stainless steel construction and watertight tray beneath the loins reception.. Chodpewn Dpxsfx Adxed -Cleaning function by pneumatic cylinder structure separating conveyors of the machine spindle. -It incorporates a positioning system using a servo drive cans.

Year of construction: 2009, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: Vegatronic 4000, Vertical Packing Machine Automatic Packing Machine Ilapak Vegatronic 4000 VT4000 Machine data: - Machine type: continuous - Maximum speed: 140 cpm - Bag dimensions: minimum width: 70mm, maximum width: 420mm. maximum length: 600mm Chedpfxotqk Als Adxjd - The machine has a forming set under the package with a width of 290mm (other forming set can be made) - Maximum dimensions of the roll with film: length: 880mm, diameter: 550mm, weight: 100kg - Execution: stainless steel - Machine dimensions: (Width x Depth x Height) 1478 x 2336 x 1550mm - Machine weight: 1500kg

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, The Rollertech-E PM 2000 is a machine designed for automatic pallet wrapping where traditional wrapping methods are not possible due to dimensions, load instability or lack of access to a turntable. TECHNICAL DATA • Wrapping height: 2000 mm • Display: 7-inch touchscreen • Control system: PLC controller • Charger: Built-in, high-frequency, 110–240 VAC, 50–60 Hz, 0.4 kW • Power supply: Batteries: 2 × AGM 12V, 85 Ah (24 VDC total) Cjdpfx Aewn Hc Iodxehd • Performance: Up to 100 pallets (80 pallets for PM version) per charge • Machine weight: 300 kg • Pallet height sensor: Photoelectric sensor • Pallet height: Manually set via control panel • Programs: 99 pre-programmed cycles • Speed adjustment: Lifting, lowering, upper and lower rotation • Photo sensor delay: Adjustable • Cycle types: Lifting; Lowering; Lifting and lowering with reinforcements at defined heights; Start from specific height; Top-only wrapping; Bottom-only wrapping • Password protection: Available for parameter security • Diagnostics: Shown on display • Charging monitoring: Shown on display • Distance from pallet: 110 cm • Minimum pallet weight: 80 kg (without film) • Minimum pallet dimensions: 40 × 40 cm Specyfikacja folii • Film roll height: 500 mm • Maximum film roll diameter: 275 mm • Film core diameter: 76 mm • Maximum film roll weight: 20 kg • Maximum film thickness: 35 microns

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. Csdpfxeuyhf He Adxshd For setting up and configuration the machine you will have to contact the manufacturer The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only

Condition: good (used), Year of construction: 2009, 083 USED RS packaging machine - heat shrink. EXTERNAL DIMENSIONS (in cm.): - length 209, - width 80, - height with closed flap: 110, - height with open flap: 110. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport The price is a net price per 1 pcs. Chjdpfx Adewgc Dxsxod Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, deck ovens, confectionery ovens, shop ovens, bakery machines, bread lines, roll lines, cake lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, croissant machines. We invite You to check all our ads.

Condition: good (used), Year of construction: 2010, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: 3754-05-10, The CMB ERL-30-EXP packaging equipment is in good working condition. It was purchased new from the manufacturer in Spain. It is sold as shown in the pictures. Maximum rotating speed - 247 r.p.m Crown diameter - 370 mm Approx. max. speed - 35 m/min Total installed power - 1,75 Kw Approx. working pressure - 6 bar Chedpfxovuqt Sj Adxjd Number of powered rollers at infeed - 3 rollers Number of powered rollers at outfeed - 3 rollers Delivery preparation and loading into the truck is included in the price. Transport is the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 8675, This LSK157 packing machine of model 8675 is offered in excellent operation condition. Codpfx Ast Aikzedxohd The machine is fully functional. Year of construction : 2003

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, power: 9 kW (12.24 HP), Window Patching Machine XLTC - 1020 Year: 2016 Max size: 1020 x 650 mm Min seize: 140 x 140 mm Codewna Nuspfx Adxohd Film thickness: 0.05 - 0.2 mm Max film size: 410 x 380 mm Min film size: 60 x 80 mm Card: 200 - 500g/mp Flute paper: < 3mm Power: 9Kw In production Available immediately

Condition: new, Year of construction: 2025, functionality: fully functional, Packing station AVANTECHNO F31 for dosing and packaging of powder coatings and other bulk materials into standard boxes 40*30*40 cm as a part of continuous production lines. Key features: • Control scales with traffic-light indication for correct filling • Adjustable line height • Rotating controller of the main scales • Valve position indicator Cjdpfx Aewz Nugsdxjhd • Blowing system for prevention of sensors dusting Technical specifications Overall dimensions (L/W/H) and weight — model F31 - 3100 * 1300 * 1460…1600 mm, 315 kg Conveyor length — model F31 – 2820 mm, up to 8 boxes Height of roller conveyor at operator`s workplace (in control scale area) — adjustable from 560 to 700 mm Maximum performance — up to 2000 kg / hour with constant flow of material Power supply — 380V AC / 50 Hz / 0,25 kW Maximum weight of the filled boxes — 50 kg Standard box size — 40 * 30 * 40 cm Package dimensions: 327*134*120 cm, 523 kg

Condition: used, BAG PACKING MACHINE Consists of: Weighing machine: make Wagner type WAMA-SP Compact, year 1995 Conveyor belt Bag emptying machine: DCE Sintamatic Bag sealing machine: Toss type 780 year 2002 Chsdsu Nu Hvjpfx Adxod *

Condition: excellent (used), Year of construction: 2002, 052 USED Machine for packing bread into bags, counting, flow pack packaging, printer. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, deck ovens, confectionery ovens, shop ovens, bakery machines, bread lines, roll lines, cake lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, croissant machines. We invite You to check all our ads. Cedsvzym Uopfx Adxjhd

Condition: excellent (used), Year of construction: 2014, 2014 MODEL CREMER BRAND TI-8016 TYPE ELECTRONIC COUNTING MACHINE. The TI series offers a fast, reliable and budget-friendly solution for counting and packaging unmixed, uniform or single-flavored products. the counting machine can be placed directly on top of a packaging machine for filling bags or placed on a conveyor belt to discharge product counts into all kinds of different packages. The versatility of the counting machine extends to the ability to count a wide range of different products in bulk quantities or to discharge single items into any package. Cjdpounk Edofx Adxjhd Multi-channel TI counters can count almost any food or non-food product, as long as the products can be well separated. From hardware and soap tablets to pre-wrapped candy and bread rolls, TI counters have proven themselves many times over as the most versatile and at the same time budget-friendly counter on the market today. All product contact parts are made of food-grade materials and are easy to clean. This makes TI counters suitable for counting both food and non-food, pre-packaged and non-pre-packaged products. Frame width 800mm, number of channels: 16 with product pool, conveyors and other auxiliary units. 2 machines are used together. 4 SETS OF LINES ARE ON SALE AND SEPARATE PRICES WILL BE CHARGED SEPARATELY.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MzCBP01, overall weight: 1,500 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,900 mm, space requirement length: 3,800 mm, space requirement width: 1,200 mm, space requirement height: 2,000 mm, power: 1.5 kW (2.04 HP), fuel type: electric, fuel consumption per hour: 20 l/h, operating pressure: 1 bar, pressure (max.): 0.6 bar, type of cooling: air, Equipment: CE marking, Automatic cartoning machine is suitable for pharmaceuticals, food, cosmetics, commodities etc.It can open box, fill products into box, then close box with tuck-in or hot-melt sealing. The machine is equipped with a series of sensors and automatic protective devices to assure the machine runs safely and effectively. It can connect with the Blister Machine, Pillow Packaging Machine, Shrink-Wrapper, etc., to form a Packaging Line. It is the best choice for mass production. Codpfx Aoxu Aamsdxjhd

Condition: used, Technical details: table height: 800 mm table rotating: 360 ° table: 800 mm Chsdpju Nu E Sofx Adxod height over floor: 940 mm temperature: max. 450 °C electrics - voltage/frequency: 220/50 V/Hz total power requirement: 1,1 kW space requirements of the machine approx.: T:0,8xB:1,0xH:1,6 m With this machine can be packed parts respectively shrink-wrapped. There is a table with 4 stations on the machine. Can be purchased together with vaccum welding machine. i.D. *

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, VC-999 QS8 + VC-999 K8T1A-SP Csdpfov Iz Hvox Adxshd ID.NO. 2922 VC-999 chamber machine with associated VC-999 wrapping machine which has previously been used for large whole cheese blocks. Dimensions 480 x 190 cm H 225 cm.

Year of construction: 2019, condition: like new (used), functionality: fully functional, SMICON - SMIMO120 55kW stainless steel 1 piece € 148,990 Chodpfx Adsttrz Iexjd This unpacking machine is suitable for unpacking/processing large quantities of packaged and unpacked organic products into a pumpable homogeneous substance. - Dimensions +/- 3990x2430x1540 L.xWr.xH. - Weight +/- 6600kg Drives: - Main drive shaft 55kW 400V/50Hz IP 56 - Drum filter drive 0.75kW 400V/50Hz IP56 - Drive by V-belt - Shaft seal: Stuffing box seal with stainless steel packing pusher Materials: - Machine material: Stainless steel and powder coating - Protective parts: Stainless steel 304 - Hammer/knife: Rubber poultry plucker picker - Filter/sieve elements: Stainless steel 304 or hardened steel Sieve/filter elements: Sieve elements with different mesh sizes can be configured according to your own wishes. The sieves can vary from Ø8 mm to Ø50 mm. Supply of liquid/cleaning: If required, liquids or steam can be added through the main drive shaft. For most products this is not necessary. This inlet can also be used as a pre-cleaning function of the machine. Advantages SMIMO120: - Separates packaging from organic material - Processing of large packaging is possible - Unique large filter/sieve surface - Unique rotary drum filter - Sieves/filter elements can be easily replaced - Addition of liquid is possible - Processing possible without adding liquid - High dry matter content of organic material - Almost dry and clean packaging - Packaging is not shredded - Also available in a stainless steel version - Less wear due to low speed of the main drive shaft - Easy access through hydraulic maintenance hatch Remarks: Capacities and results are highly dependent on the product to be processed in connection with the installed sieves/filters The system is sold without the steel frame.

Condition: excellent (used), XYZ Proturn SLX425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Chedjxt Icqopfx Adxsd We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78998 Machine Serial Number: L553 Cost: £24,950.00 + VAT

Condition: excellent (used), REF: MM6263 Complete weighing and packing system, previously used to pack various types of nuts. This system was used for weighing and producing pillow packs and block-bottom packs in 500g and 1kg sizes. This system comprises of the following equipment: 1 x Set of stainless-steel steps. 1 x Deamco stainless-steel guarded hopper on frame with height-adjustable feet. Serial number - 1339. 1 x Riley Automation variable speed vibratory feeder fitted with perforated pan measuring 215mm wide. 1 x Gough Engineering bucket elevator with 200mm wide buckets. 1 x Riley Automation ISF-2 vibratory feeder fitted with a smooth pan. 1 x Ishida 14-head weigher with smooth pans. Model - CCW-EM-214/30. Serial Number - 552130. Date of manufacture -2002. 1 x Painted steel gantry with steps. 1 x Ilapak vertical form, fill and seal bagging machine with updated touch-screen control and supplied with 5 x forming tubes. Model- VT 2000 / 400 S. Serial Number - S977/00. Sealing jaws - Vertical: 430mm & Horizontal: 400mm. 1 x ICE Zodiac Hawk printer. Serial Number - 1927013012TZH. 1 x Herma printer. Model - H400 16R. Serial number - 20314483. 1 x Outfeed inclined conveyor. Belt dimensions -1700mm long x 350mm wide. 1 x Ishida DACS combination metal detector checkweigher. Model - DACS-W-012-SB-PB-I. Date of manufacture - 2002. Serial number - 552424. Chsdpsxrk Tpefx Adxod 1 x Outfeed inclined conveyor. Belt dimensions -2350mm long x 300mm wide. Infeed height -770mm. Outfeed height - 1040mm high.

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Chedpfx Asiit Erjdxod Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Cedpfxexftqds Adxjhd Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: reconditioned (used), Kalmijer Cookie machine if you have further questions please send an message Csdpfxokzi Ulo Adxjhd

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Cjdpfx Adext Ibyexohd Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 1340 Trainer Lathe 2 Axis Digital Readout Max. Distance Between Centres 1000mm Max. Swing over Bed 330mm Max. Swing over Gap 495mm Spindle Bore 35mm Spindle Speeds 53 – 2000 rev/min Spindle Motor 3hp Quick Change Tool Post Tailstock MT3 Tailstock Dia’ 40mm Tailstock Travel 110mm Manufactured | 2017 415V Electrics Supplied with: Tool Holders as Pictured Change Gears FOR SALE WITH JET MACHINERY LTD Jet Machinery Stock No: #78011 Machine Serial Number: TBC Cost: £3,950.00 + VAT Chodpfx Ajxqq H Tsdxod Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2016, XYZ 1550VS Gap Bed Centre Lathe EX Training College Machine 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine Manufactured & Installed 2016 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 1250mm Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Chsdpfxoxn Sf Se Adxod Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79010 Machine Serial Number: 7715 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2014, XYZ 1020 Vertical Machining Centre Siemens 828D Control Manufactured & Installed in 2012 24 Station Too Carousel 8k Spindle Machine Capacity: Table Size: 1120 x 500 X Axis Travel 1020mm Y Axis Travel 520mm Z Axis Travel 540mm Rapid Traverses 20,000m/min Spindle: Spindle Speeds – 8,000ppm Tool Shank ISO40 Tool Storage Capacity 24 Tools Spindle Power 20Hp For sale with Jet Machinery Ltd Machine Serial Number: SMU00143 Chodpfx Adsxndrdjxsd Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.