Used Ball Mandrel for sale (3,212)

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, bending radius (min.): 9 mm, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. Dedpfondn Agjx Am Rsch The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. Dcjdpfx Amonfvx Ns Roh POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg Dodpsndk N Aofx Am Rjch OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop Dodpong Amkjfx Am Roch OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg Dcodpfxeng A R So Am Reh OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 100 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 8 mm, bending angle (max.): 195 °, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Dcodpsnh R Suofx Am Roh Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 1018, control type: PLC-controlled, degree of automation: manual, actuation type: electric, pipe diameter (max.): 50 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, warranty duration: 24 months, Equipment: CE marking, emergency stop, foot remote control, quick-change device, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry Dcsdpfx Amsnfvy Uj Roh - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. Dcsdpfeng Ax Sex Am Rjh POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have switched the machine on and let it run empty for a few minutes to verify its functionality. It comes with 4 x 25-liter nylon containers. Additionally, 120 kg of zirconium beads with a 1 mm diameter are available. ~ Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a machine designed for production applications, built to handle medium-scale capacities to meet industrial requirements. It facilitates the smooth transition of materials from laboratory scale to full production, ensuring consistency and repeatability of processes and thus reliable material quality. The equipment is widely used across new energy, metallurgy, electronics, ceramics, geology, mining, construction materials, chemical industry, light industry, cosmetics, environmental protection, and other enterprise-level material production sectors. Extremely high centrifugal forces inherent to planetary ball mills generate intensive grinding energy, resulting in short milling times. These machines are ideal wherever the quality control process demands the highest standards of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is well suited for research tasks at scientific institutes, universities, and industrial R&D laboratories to verify the feasibility of scale-up to mass production, as well as for routine operations such as mixing and homogenizing soft, hard, brittle, or fibrous materials—from laboratory tests through to production. - Key Features: Dodpfoyilnzex Am Roch - High-performance, nanometer-scale grinding - Digital display, intuitive operation, precise parameter setting - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing with up to 4×6/9 L samples, simultaneous processing of 4 materials - Electric lid opening and integrated crane for easy and convenient operation - Storage for 3 modes and 15 programs - Power failure protection with memory function and automatic restart - Suitable for dry, wet, vacuum, and protective atmosphere grinding - Machine stops upon lid opening; automatic interlock prevents accidental release - Equipped with rollers and swiveling feet for easy movement and stable operation Applications: Grinding, mixing, homogenizing, colloidal milling, mechanical alloying, mechanochemistry Fields of Application: New energies, geology/metallurgy, glass/ceramics, engineering/electronics, building materials, environment/recycling, agriculture, chemistry, medical, biology Feed material: Soft, hard, brittle, fibrous – dry or wet Size reduction principle: Impact, friction Feed size: < 5 mm soil, < 10 mm Final fineness: For colloidal milling, samples below 0.1 micron Number of grinding stations: 4 Grinding methods: Dry grinding, wet grinding, vacuum grinding, grinding under protective atmosphere

Condition: ready for operation (used), Pitch: 10 mm Thread length: 1460 mm thread Ø: 30 mm Dcsdjd Atq Ropfx Am Rjh Spindle nut mounting: 60 mm Ø

Condition: ready for operation (used), Pitch: 20 mm Thread length: 2330 mm Dedpfed Atq Esx Am Roch Thread Ø: 38 mm Nut length: 130 mm

Condition: ready for operation (used), Pitch: 10 mm Dodpfed Atq Tsx Am Rech Thread length: 1165 mm thread Ø: 30 mm spindle nut mounting: 28 x 49 mm Ø Total length of spindle: 2170 mm

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 355 kg, total length: 2,000 mm, total width: 1,300 mm, total height: 1,800 mm, The AVIKO 60100 G3 DRY ADVANCED detects flaws on steel balls with diameters ranging from 60 to 100 mm. Customers can control the system via the PC/PLC and its intuitive HMI, with access to software statistics, protocols, sorting history, video manuals, and direct connection to the machine monitoring software Precision Viewer. All primary movement elements are driven by compressed air or electric motors. The Advanced model is equipped with advanced eddy-current probes and incorporates the eddyvisor C instrument for precise crack detection. For operational efficiency, a loader and outlet holder are included as standard features. For more details please visit our website. Dsdpfx Amjy H Dmbs Rjch

Condition: as good as new (ex-display), Year of construction: 2012, ⭐ PREMIUM LOW-HOURS BORING MILL — READY FOR IMMEDIATE USE ⭐ Bohrwerk SCHIESS SMT BMT 130 (2012) | Low Hours (~10k) | Heidenhain iTNC 530 | Ball Bar Tested ​Description: ​PREMIUM OFFER: LOW HOURS & VERIFIED GEOMETRY ​The Opportunity: You are looking at a Schiess SMT BMT-130 (Year 2012) with a transparent history of light usage. With only ~10,000 Spindle Hours (and 8,900 Program Run Hours), this machine has averaged less than 1 shift per day since new. It is NOT a tired production machine. ​✅ JUST COMPLETED (Ready for Inspection): ​Geometry Verified: Passed the Renishaw Ball Bar Test with excellent results (Proof of precision available). ​Aesthetics: Professional Fresh Paint applied. The machine looks excellent. ​Functionality: Automatic Tool Changer (ATC) fully serviced and tested. ​TECHNICAL DATA (Verified on Screen): ​Control: Heidenhain iTNC 530 ​Spindle Time: approx. 10,090 h ​Program Run: approx. 8,900 h ​Spindle Diameter: 130 mm (ISO 50) ​WHY BUY THIS MACHINE? ​Authentic Condition: The low hours are genuine and verified by the control unit. ​Ready to Work: Geometry checked, ATC working, looking great. ​Price: At €230,000, it offers the best Price/Performance ratio on the market for a 2012 machine. ​VIDEO PROOF by request Technical data: Spindle diameter - 130mm Spindle Type - ISO 7:24 No50 Spindle Speed - 3000 RPM W axis - 800mm Y axis - 2000mm Z axis - 1600mm X axis - 4000mm Table size - 1800x2200mm Table loading capacity - 12.000kg General dimensions - 6800x6300x4600mm Machine Weight - 35000kg Dcjdpfx Aepa N Uhjm Roh

Year of construction: 2012, condition: used, functionality: fully functional, For sale are 3 ballistic separators from Hartner. Two of them are still integrated into our production and can be inspected on site. The conversion is scheduled for around the beginning of June 2026. All technical data can be found in the images. If you have any further questions, please feel free to contact us. Dedpfx Amjyrnguj Rech

Condition: used, functionality: fully functional, Minimum steel tube diameter: 10 mm Maximum steel tube diameter: 76.5 mm Minimum wall thickness: 0.8 mm Maximum wall thickness: 5 mm Dcjdpsy Rkr Sofx Am Reh Minimum internal bending radius: 40 mm Maximum average bending radius: 400 mm Useful length with positioner: 3500 mm Comes with a set of dies

Condition: used, functionality: fully functional, Year of construction: 1991, load capacity: 10,000 kg, empty load weight: 1,015 kg, total length: 1,690 mm, Carrying mandrel Load center: 850 Condition: Ready for use and fully functional Dsdpfx Aou Dztfsm Roch Technical condition: good Description: Length: 1690 mm Diameter: 400 mm

Condition: used, functionality: fully functional, load capacity: 16,000 kg, total length: 1,500 mm, Carrying mandrel Dedpeu Dzuvjfx Am Rsch Condition: Ready for use and fully functional Technical condition: very good Description: Length: 1500 mm Diameter: 350 mm

Condition: used, functionality: fully functional, load capacity: 6,000 kg, empty load weight: 1,250 kg, total length: 2,800 mm, Carrying mandrel Dcjdsu Dzrbjpfx Am Roh Load center: 2000 Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this DORN model, we have approx. 200 heavy-duty forklift trucks, compact forklift trucks, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this TD-270 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, Year of construction: 2003, load capacity: 42,000 kg, empty load weight: 3,500 kg, total length: 1,600 mm, Carrying mandrel Load center: 1200 Djdpfxsu Dzwks Am Rjch ISO class: Terminal West Condition: Ready for use and fully functional Technical condition: very good Description: Length: 1600 mm Diameter: 400 mm

Condition: like new (used), Steinmeyer Ball Screw 3526.512/25.40.728.1122 P5P Manufacturer: August Steinmeyer GmbH & Co. KG Component: Ball screw / ball screw shaft Type: 3526.512/25.40.728.1122 P5P Precision class: P5P Design: Ball screw shaft with nut Condition: New, in original packaging Packaging: Wooden crate with protective packaging Dcedpfeyr Ab Tsx Am Rjh Application: Precise linear movements in machine tools, automation systems, and CNC equipment Location: Altenglan

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Type: 5000 Capacity: up to approx. 40 mm Dcedpsyfmwxsfx Am Reh Mandrel length: 4500 mm CNC controlled Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Very little used

Condition: excellent (used), Abrasive mandrels ,different sizes Dsdpfx Ask R Tnpom Rech also single to give away. Diameter : 8-10-12-13-14,8-15-16-17-18 mm price piece 10 Euro Diameter : 20-22-25-28 mm Price per piece 12 Euro Diameter : 30-32-34-35-36-38-mm Price per piece 15 Euro Diameter : 40-42-45-48 mm Price per piece 20 Euro Diameter : 50-52-55 mmPrice per piece 25 Euro Diameter : 60-62-65-68 mm Price per piece 30 Euro per piece Diameter 70 mm price per piece 40 Euro Diameter 80 mm price per piece 50 Euro We are also happy to offer you a package price.

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine Dcodpfx Aeh S Ti Eom Rsh -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Tool: Currently available tools are designed for box profiles -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Year of construction: 1990, condition: used, Manufacturer : Fryma Model: MSM-18 Year: 1990 Dodpfx Aex R Dd Iom Rjch   Type : Ball mill type Co-Ball Application: fine grinding of suspensions and highly viscous products. Grinding chamber volume: 1.1 litres Internal overpressure: 2.5 bars Jacketed: 2 bars Motor power: 5.5 kW   Capacity: 20 – 80 l/h depending on product.   Examples: food: chocolate coatings / fillings cosmetics: lipsticks, pigment pastes pharmaceutiques : additifs chimiques : laquage pour les pigments, les peintures et les céramiques.