Used Axa Vsc 1 for sale (36)

Year of construction: 1988, condition: ready for operation (used), Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355. Hsdpot Dpn Nofx Adbji

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: 0.25 kW 1410 rpm -Max. Pressure: 110 bar Hjdpfxedpyzrj Adbei -Max. Liter output: l/min -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm -Weight: 32 kg

Year of construction: 2002, condition: excellent (used), X-4.000 / 2x1.750 , Y-900 , Z-700 ,SK 40 , 60-6.000 U/min , 2 Werkzeugwechsler für 72 Werkzeugaufnahmen, Siemens 840 D , Heidenhain Meßsystem , 3D- Meßtaster Renishaw , BLUM - Werkzeugbruchkontrolle , Späneförderer , Bandfilteranlage Hodpfegb Rq Sex Adboi

Condition: used, Year of construction: 1999, operating hours: 19,500 h, functionality: fully functional, machine/vehicle number: 85525, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 2,900 mm, total height: 3,100 mm, total length: 3,800 mm, table length: 2,030 mm, table width: 500 mm, table load: 900 kg, tank capacity: 290 l, tool length: 250 mm, tool diameter: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 axes 36 tool stations SK40 Pendulum operation with partition wall Hsdpfsxup Iqex Adboi 2x swiveling bridges Coolant tank 290 l with belt filter Control unit Heidenhain TNC 410 MA A-drive RTA 200/300

Condition: used, Quick change tool post, tool holder head, quick change tool post, quick change boring tool post, quick change boring bar post, quick change turning tool post -Manufacturer: AXA, quick-change tool holder Multifix D1H 63180 Hodpfshpu Uqjx Adbji -Shot dimensions: see photos -Clamping length: 180 mm -Dimensions: 180/95/H185 mm -Weight: 8.3kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 41,795 h, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840 D ShopMill, rotational speed (max.): 6,000 rpm, The sliding surface of the base carriage X/Y was renewed in 2022! TECHNICAL DETAILS Travel range X-axis: 1,760 mm Travel range Y-axis: 600 mm Travel range Z-axis: 800 mm horizontal Travel range Z-axis: 770 mm vertical A-axis: ±100° Faceplate diameter: 520 mm Rapid traverse X/Y/Z: 40/40/30 m/min Number of controlled axes: 5 Hsdpfxoyfriaj Adbei Spindle speed range: 30 - 6,000 rpm Drive power: 30 kW Torque: 143 Nm Tool holder: SK 40 Tool stations: 36 MACHINE DETAILS Control: Siemens 840 D ShopMill Dimensions & Weight Required floor space (L x W x H): 5.2 x 3.4 x 3.3 m Machine weight: 12,000 kg Operating hours: 41,795 h EQUIPMENT NC rotary table AXA RTA 4L-520 Manual tailstock, center height 280 mm Internal coolant supply (IKZ): 30 bar Chip conveyor, discharge left Integrated coolant tank 200 l Coolant tank 400 l 3D touch probe, Renishaw RMP 60 with RMI receiver Direct linear measurement system Heidenhain Hardened flat guides Counter-guides coated with sliding material (Turcite)

Condition: good (used), Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine Hodjb A I Dxjpfx Adboi Multi-spindle drilling machine -System without control -1x Spindle machining units -2x sleds -Max. feed stroke: 110 mm -Speed: 1400 rpm -Built-in collet: 6 mm -Weight: 350 kg

Condition: new, AXA 360° swivel cantilever crane Max capacity : Kg 500. Max height : mm 2804. Max overhang : mm 1360. Easily maneuverable due to 360° rotation and high load capacity pivoting wheels with bumper supports and parking brakes. Due to the frontal footprint of only 995mm, it can be used in aisles and confined spaces. The lifting arm is extendable in 4 different positions. Hjdjgypgdspfx Adbei

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Hjdpfxsfh R N Ds Adboi Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Year of construction: 2023, condition: new, AXA MOVING CYLINDER ELECTRO-HYDRAULIC PRESS. 150-ton power. Automatic double speed with rapid. Moving cylinder stroke 816 mm transverse. Internal clearance from shoulder to shoulder mm 1500 Rod stroke mm 300 Hjdelruhdjpfx Adbei GALTECH distributors. - 2MP block. - No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated at 20 bar) and one with adjustable pressure with handwheel to set the required power. - Pressure relief valve with mechanical lock to prevent overpressure. - Standard pressure gauge to display power output. - INTECH electrical panel certified according to current regulations and with independent CE marking.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTC530, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 2 x 750 mm Travel Y-axis: 500 mm Travel Z-axis: 600 mm Rapid traverse X / Y direction: 25 m/min Rapid traverse Z direction: 20 m/min Feed force: 9 kN Spindle speed range: 30-12,000 rpm Tool changer: 22-position Tool holder: SK40 Hsdpfx Adjymz D Nobji Maximum tool length: 400 mm Maximum tool diameter: 85 mm (135 mm with adjacent stations empty) Tool change time: 4.0 s Clamping area: 2 x 1,350 mm x 500 mm Maximum table load per table: 550 kg MACHINE DETAILS Control model: Heidenhain iTC530 Drive power: 30/20 kW Total power requirement: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6.0 x 3.5 x 3.5 m Machine weight: 10,000 kg EQUIPMENT Internal cooling Coolant system with paper band filter Documentation

Condition: good (used), Year of construction: 2002, 5-axis CNC machining center Manufacturer: AXA Machine Model: VPC 50 U Control: Siemens Year of manufacture: 2002 Number of controlled axes: 5 Gantry design Hjdpfx Aeymw Tgedbei TECHNICAL DATA Travel ranges - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle: Swiveling spindle - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Machine table - Table size, fixed table L x W: (mm) 1,100 x 1,100 - Diameter of built-in rotary table: (mm) 1,100 x 1,100 Technical data and information subject to change and errors excepted.

Condition: used, Year of construction: 2003, Universal CNC machining center Hjdpjwwt Nmefx Adbsi Manufacturer: AXA Model: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel X/Y/Z: 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 t

Condition: good (used), Year of construction: 2012, 5-Axis CNC Machining Center Manufacturer: AXA Machine Model: VPC-2800U Control System: Siemens Year of Manufacture: 2012 Technical Specifications Working Area Hodpfxoyk T Emo Adbei - X travel vertical (mm): 3,900 - Y travel (mm): 2,940 - Z travel (mm): 1,100 CNC Rotary Table - Clamping area (mm): ø 2,800 Feed Drive - Max. rapid traverse speed in X/Y/Z (m/min): 30/30/25 Working Spindle - Standard drive No.: 140 Spindle speed range (rpm): 30-7,500 Spindle power max. duty cycle 100% (kW): 63 Spindle torque max. duty cycle 100% (Nm): 191 Tool holder: SK50 Swivel Head - Swivel range B-axis (degrees): 90 - Indexing: freely interpolating Tool Changer - Tool stations: 60 Please note: The machine is NOT equipped with a turning function. Changes and errors in the technical data and information excepted.

Condition: excellent (used), Year of construction: 2014, operating hours: 40,000 h, functionality: fully functional, I am pleased to offer you a very well-maintained, nearly new AXA VPC 45 U. The machine is available immediately. An on-site inspection under power and in operation is possible at any time, and video footage is available. Machine hours (ON): approx. 40,000 Spindle hours (ON): approx. 25,000 Travel ranges (linear axes): Hjdpfx Adoyh Nrzjboi X-axis: 2,940 mm Y-axis: 1,400 mm Z-axis: 900 mm 5-axis simultaneous machining: This machine is a true 5-axis machining center, enabling simultaneous 5-axis milling with X/Y/Z + B-axis (stepless swivel head) + C-axis (NC rotary table). This allows workpieces to be machined in a single setup with continuous movement from various spatial orientations. Machine (basic data) Machine type: Vertical gantry machining center Manufacturer: AXA Entwicklungs- und Maschinenbau GmbH Model: VPC 45 U Year of manufacture: 2014 General technical data Overall length: 6,800 mm Overall width: 3,600 mm Overall height: 4,100 mm Total weight: 29 t Electrical data Connection voltage: 3×400 V / 230 V / N / PE, 50 Hz Connected load: 69 kVA Main fuse: max. 125 A Control voltage: 24 V Spindle Spindle design: Hollow shaft motor, water-cooled Speed range: 30–10,000 rpm Tool holder: SK40 Drive motor: DME 112 AL-4FGS (Kessler) Max. power at 40% duty cycle: 40.0 kW Max. power at 100% duty cycle: 26.6 kW Max. torque at 40% duty cycle: 191.0 Nm Max. torque at 100% duty cycle: 127.0 Nm NC rotary table Rotary table: RTA 6S-1500 Table diameter: Ø 1,500 mm Weight: 2,700 kg Max. payload (vertical rotary axis): 10,000 kg Tool changer Tool changer: Type M Number of tools: 100

Condition: excellent (used), Year of construction: 2008, operating hours: 50,236 h, functionality: fully functional, travel distance X-axis: 2,360 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, For sale is a 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully functional, has only been used for light machining such as aluminium. Of particular note: Each of the two NC tables allows clamping of workpieces up to Ø1,100 mm – see drawing. A fixed milling table can also be mounted. A high-speed spindle insert SK50 is available for this machine. Technical data: Year of manufacture: 2008 Controller: Heidenhain iTNC 530 Machine on: 50,236 hours Spindle hours: 16,319 X-axis: 2,360 mm Y-axis: 600 mm Z-axis: 800 mm Hjdjyi Er Aopfx Adboi Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Tool changer: 52 positions on 2 chains NC rotary tables (2 pieces) Type: SKH-NC 7/T Table plate: Ø 630 mm Max. load: 750 kg Clamping: Hydraulic Dimensions: 5,650 mm x 3,700 mm x 3,200 mm Weight: approx. 22,000 kg Equipment: IC coolant system with 50 bar high-pressure pump, belt filter, Heidenhain RCN 729 measuring system, 3D probe Renishaw OMP 60, electronic handwheel, 2x Visiport (inspection windows), chip conveyor. Tool holders are not included in the offer, but can be supplied at additional cost. Transport and loading can be organized throughout Europe on request for an additional fee. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sales – BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or to contact us, please visit our website.

Condition: ready for operation (used), Year of construction: 1994, operating hours: 3,547,941 h, controller manufacturer: HEIDENHAIN, number of axes: 4, This 4-axis AXA USC-2-M was manufactured in 1994. It features a 4th axis with tailstock and a tool magazine with 22 tool positions, enhancing its versatility. Ideal for complex machining tasks, this universal machining centre represents a significant asset for precision work. Contact us for more information about this machine. Hedpsyfu Dyofx Adbji • 4th axis with tailstock (special feature) • Tool magazine with 22 tool positions (optional) Additional equipment • Chip tray

Condition: good (used), Year of construction: 1998, AXA VHC-3-M/K 5-Axis Universal Machining Center Year of manufacture: 1998 Control: SIEMENS 840C Machine number: 85667 Travel distances: Longitudinal X-axis: 1,200 mm Transverse Y-axis: 700 mm Vertical Z-axis: 800 mm B-axis: -90° to +90° C-axis: 360,000° Spindle overhaul worth €15,000 carried out in 08/2025. Equipment: Swivel head -90 degrees to +90 degrees, indexing at 2.5-degree increments NC rotary table, make: SEMPUCO 400 mm Spindle taper: SK 40, speed range: 40 – 6,000 rpm / 17.2 kW 22-position tool changer Internal coolant through the spindle External coolant Paper band filter Hedpjyl Tzksfx Adboi Chip conveyor Scope of delivery includes: Documentation / machine parameters on data carrier Equipment, technical data, and transport – see PDF. Illustration, content, and details are provided without guarantee and therefore not binding. All other accessories visible in the photos and video are not included in the scope of delivery and are thus not part of this sale. The scope of delivery only comprises those accessories which are expressly listed here, in the order confirmation, and in the invoice. FCA (Free Carrier, loaded on truck) D-92729 Weiherhammer Packaging only Delivery time: immediately Subject to prior sale / Payment due immediately upon conclusion of sale

Condition: good (used), Manufacturer: AXA Type: HFB 600 Control system: Siemens 840D Solutione Line Year of construction: 2015 Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm Hodjt Tdp Tspfx Adboi height 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: good (used), Year of construction: 2012, AXA DBZ 2/50 double station machining center, Year of construction 2012, Siemens 840 control system, Travel X/Y/Z 2x800/600/600 mm, 16-position tool changer, SK 50 tool holder, Hsdpfx Asridf Uodboi Spindle speed up to 4,000 rpm, Milling spindle - water-cooled hollow shaft motor, dir. Measuring systems, chip conveyor, heat exchanger, switch cabinet, oil mist lubrication, Rittal cooling system,

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 850 mm, Travel Paths X-axis: 1760 mm Y-axis: 600 mm Z-axis: 850 mm Vertical distance table – spindle nose: 0 – 820 mm Horizontal distance table – spindle nose: 180 – 1030 mm Spindle & Drives Spindle speed range: 30–12000 rpm Swivel head B-axis: interpolating B-axis travel range: -100 to 100 Max. torque at 40% duty cycle: 191.0 Nm Hjdpfxoydmpre Adbji Max. torque at 100% duty cycle: 127.0 Nm Max. power at 40% duty cycle: 40.0 kW Max. power at 100% duty cycle: 26.6 kW Rotary Table RTA 4-TF-630 Table diameter (vertical rotary axis): 630 mm Weight: 595 kg Tool Changer Tool holder: HSK A 63 Tool pockets: 42 Machine Dimensions Length / width / height: 6850 / 3450 / 3100 mm Weight: 19 t Accessories: – Documentation – Measuring probe

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available. Hsdstyymcspfx Adbei

Year of construction: 2003, condition: ready for operation (used), A CNC large-format machining center Axa including peripheral equipment is available. Travel X/Y/Z: 4000mm/900mm/950mm, working area X/Y: 4000mm/700mm, tool stations: 72, spindle speed: 10000rpm, control: Heidenhain iTNC 530, operating hours: 77956h, spindle hours: 29342h, power-on hours: 80109h. Including chip conveyor, internal cooling, chip spray gun, oil mist extraction, handwheel, probe and tool measurement Blum Laser. Documentation available. An on-site inspection is possible. Expected to be available September 2026. Hjdeyb Scfepfx Adboi

Condition: good (used), Year of construction: 2005, MACHINING CENTER Make: AXA, Model: DBZ, Year of manufacture: 2005, Control: HEIDENHAIN TNC 520, Hodpfx Asygwwxodbsi Spindle speed: 10,000 rpm, 24-position automatic tool changer, Internal coolant supply system 40 bar, Chip conveyor

Year of construction: 2003, condition: excellent (used), Working travels 6000x1000x1200mm B-Axis milling head +/-90° Table size 6400x1000mm Spindle taper HSK-100 Hjdpfx Aod Rz Uvedboi Spindle speeds -9000 rpm Tool changer 80 pos. Control SIEMENS 840D Coolant through spindle Tool measuring device Zero point clamping system 3R MARCELS MASCHINEN CH