Used Automation for sale (13,494)

Condition: good (used), Late model APC turret saw. Has been cutting frozen loins into chops. Rodpfx Aetq A Nxedzscf

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm square 175 x 175 mm rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: • Semi-automatic version • Raising and lowering of the saw frame Rcsdpfx Aexztfaedzjf • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1981, cutting diameter 320 mm saw band length 4670 mm cutting width 580 mm total power requirement 7,4 kW weight of the machine ca. 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection switch for single cuts / multiple cuts. Rcodpfxjt Hwrns Adzsf * Display for band tension and cutting feed. * Automatic motor-driven material feed, controlled by a positioning processor, Model PP 160, with input of the appropriate lengths using a roll conveyor approx. 1,500 mm, with enlargement approx. 2,000 mm. And with a stable roll conveyor for the exterior area, 3,500 mm. * Built-in chip conveyor with coolant device. * Built-on switch cabinet. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of saws on stock. Please let us know your requirements.

Condition: used, Three Knife Trimmer with automatic infeed belt for Inline or Offline production Dreimesserautomat / Three Knife Trimmer Wohlenberg 44 FM 50 Baujahr / Year 1988 - Serial-No. 3296-013 Format / Size max.  315 x 440mm  Rcedpfjx Swm Eox Adzof Thicknes max. 100mm Speed max. 3000 cycles per hour Automatischer Einlauf / Specification automatic feeding Bandauslage / Belt delivery Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2018, Automatic angle welding machine Manufacturer: Diez Type: AWS4535 Year of manufacture: 2018 No operating hours! Welding frame: 500 x 350 mm Band width: 32 mm External dimensions: 170 x 130 x 135 cm 22726 Rcedpfx Aewriuuedzsf

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 110362L0 / 110363L0, PKM Packaging GmbH / KOCH Pac-Systeme GmbH – Fully Automatic Pharmaceutical Packaging Line For sale is a high-quality, fully automatic packaging line from PKM Packaging GmbH / KOCH Pac-Systeme GmbH (year of manufacture 2012) for pharmaceutical, medical device, diagnostic, healthcare, and cosmetic products. The line consists of two interconnected machine modules and handles the complete secondary packaging process – from the automatic erecting of folding cartons, product insertion and grouping, to closing, labeling, marking, check weighing, and rejecting defective packages. Equipment: Automatic carton erector Collation packer Carton closer Mettler Toledo Garvens XS3 checkweigher (7–700 g / 0.1 g) Rcsdpfxjzmp Tqe Adzjf BLUHM label printing and dispensing system Wolke m600 inkjet marking system Camera and inspection systems Modern touch panel operation PLC control with recipe management, user management, and fault diagnosis Servo drive technology with EtherCAT Complete protective enclosure with safety monitoring Technical data Manufacturer: PKM Packaging GmbH / KOCH Pac-Systeme GmbH Year of manufacture: 2012 Machine numbers: 110362L0 / 110363L0 Operating voltage: 400 V AC Frequency: 50 Hz Connected load: 6 kW + 3 kW Compressed air: 6 bar Enclosure protection class: IP44 Last used packaging formats The system was last used for the folding carton sizes shown in the appendix. The attached die drawings show the last used carton blanks and formats. Conversion to other folding carton formats is possible, depending on the packaging size and product design. Original investment value Garvens checkweigher (Mettler Toledo) – €27,695.00 KOCH carton packaging system VM0059 – €794,497.34 PKM carton packaging system VM0059 – €266,061.66 Other components and integration Total investment of the packaging line: approx. €1,351,161.00 Scope of delivery complete packaging line Carton erector Collation packer Carton closer Conveyor and roller conveyors Checkweigher Labeling and marking systems Camera and inspection technology Control cabinets technical documentation including electrical diagrams, pneumatic diagrams, drawings and parts lists The system is in very good condition and is currently installed in a pharmaceutical plant. Inspections are possible by appointment. We will gladly send functional videos, technical documents, information on disassembly, packaging, and worldwide shipping upon request.

Condition: used, Automatische Ösmaschine / Automatic Eyeletting machine Hang 103 LOK Serial-No. 24707 Für kleine bis mittlere Serien-Auflagen / For small to medium series-batches Arbeitstiefe / Working depth 130 mm Stückzähler / Counter Auslösung durch elektrischen Fußschalter / Release via foot switch Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Rjdpev D N H Nefx Adzscf On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2010, condition: good (used), machine/vehicle number: 3302, Outer diameter of the core: 450-600 mm; Outer diameter of the flange: max. 1200 mm; winding width: 100–400 mm. Smooth tube with an outer diameter of 10-40 mm, or corrugated tube with an outer diameter of 40-110 mm, max. 20 m/min. Rcodpszp Dw Nofx Adzsf

Condition: used, Year of construction: 1994, KAISER Press Pressing force 4,000 kN Stroke adjustment 40-200 mm Ram adjustment 150 mm Rjdpfx Adezp Ed Rezjcf Stroke rate 20-80 1/min Table area 2,340 x 1,600 mm Ram area 2,000 x 1,500 mm Installation height 550 mm

Condition: used, Year of construction: 2007, No. 3177 Automatic optimizing cross-cut saw WEINIG Dimter OptiCut 200 - 1 Used, year of construction 2007, machine already dismantled For cutting timber to fixed lengths Timber dimensions to be processed: Minimum / maximum input length: 3000 - 5000 mm Minimum / maximum input width: 80 - 200 mm Minimum / maximum input thickness: 38 - 80 mm Maximum timber cross-section: 200 x 50 mm Minimum / maximum finished timber length: 700 - 1000 mm Rcodpou Atmujfx Adzsf Average number of cuts per board: 5 Types of wood: softwood or hardwood System performance: Maximum feed speed: 180 m/min, continuously adjustable Time per cutting cycle, including braking: 0.7 - 1.2 seconds Overview of components: Item 1: Infeed conveyor belt upstream of the saw Length: 1.5 m, coupled to the saw’s feed motor Item 2: Automatic cross-cut saw OptiCut 200 - 1, left-hand version With integrated length-measuring wheel and integrated blow-out device for waste pieces Graphics-capable operator terminal with 1/4 VGA display, numerical keypad and function keys, including the OptiCom software package for system control The machine is fed from the left-hand side Item 3: Outfeed conveyor belt / sorting station With drive unit, without ejectors Conveyor length: approx. 1.5 m The infeed table was not used by the previous owner. Two feed rollers were installed for feeding the material. The conveyor table is included, only the rubber conveyor belt is missing. Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, Year of construction: 2013, machine/vehicle number: 289S26, Max. bar diameter: 32 mm, max. machining length: 250 mm, control system: FANUC Series 160i-TB, conveyor belt: ERUTE, left-hand bar loader magazine: FMB Turbo 3-36, serial number: 53-262361 / 1117340, filter unit, high-pressure system: MÜLLER combiloop CL3G, serial number: CL3459, with chip conveyor, extinguishing system, without tools. Rjdpfx Aozqy Tcodzocf

Condition: used, Year of construction: 2012, machine/vehicle number: 282S25, Max. bar diameter: 32 mm, max. machining length: 250 mm, control system: FANUC Series 160i-TB, conveyor belt: ERUTE, left-hand bar loading magazine: FMB Turbo 3-36, serial number: 52-261754/966566, filter unit, high-pressure system: MÜLLER combiloop CL3, with chip conveyor, without tools. Rcjdpfxjzqy Tij Adzef

Condition: new, Year of construction: 2026, Maximum cutting diameter 400 mm Maximum rectangular cross-section 400 × 400 mm Band dimensions 3860 × 34 × 1.1 mm Band speed 27 / 45 / 69 m/min Speed ​​regulation Stepless (3 ranges) Power supply 400 V Main motor power 4 kW Drive type Mechanical transmission + hydraulic system Rcsdpfjzr I T Hsx Adzjf Machine type Automatic band saw Design Column-type Vise Hydraulic Material feed Automatic, hydraulic Control Automatic (battery mode) Feeding accuracy ±0.20 mm Cooling Coolant system (flood) Belt cleaning Wire brush Machine dimensions (L × W × H) 2400 × 2380 × 1800 mm Net weight 2100 kg Gross weight 2300 kg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm Rcodpfszrwypox Adzjf New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular saw machine VELOX 350 VA-MPS Hydro-pneumatic fully automatic model For saw blades up to 350 mm in diameter, mitre cuts left and right 45° and bevel cuts up to 45° left. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat Rjdpfx Aezpxh Nodzocf - 45° left 65mm round, 60mm square, 180x50mm flat - 45° right 115mm round, 100mm square, 150x80mm flat Standard features: • State-of-the-art micro-processor control with multi-function display • Safety package with the following functions: 1. Minimum inlet pressure monitoring 2. Clamping jaw monitoring/material tension • Hydro-pneumatic control of the saw head • Pneumatic double clamping device • Pneumatic vertical clamping device • Electro-pneumatic material feed unit • Vernier scale for fine length adjustment • Integrated coolant spray device • Connection nozzle for chip extraction system Speed 3600 min-1

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, year of last overhaul: 2020, Equipment: CE marking, Automatic Bandsaw - Crosscut and straight cut - machine was refurbished in 2020 and is in excellent condition - nice and simple to use - built to last, made in Italy. Redpjy S Dbpjfx Adzjcf

Condition: used, Weinig Unimat 23 SP automatic planing and splitting machine for the precise planing (or pre-planing) and splitting of solid timber in a single operation. The machine delivers a high standard of finish and is ideal for efficient mass production in the timber industry. Technical data: - Spindles: 4 - Working width: 230 mm - Working height: 120 mm Rodpfxozrxywo Adzocf - Spindle 1: Bottom (5.5 kW) - Spindle 2: Top (5.5 kW) - Spindle 3: Right (11 kW) - Spindle 4: Left (11 kW) - Feed: 5.5 kW

Condition: used, Year of construction: 2017, Schuler BEUTLER Press Type: MC 4000 Year of manufacture: 2017 Press force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Die height: 750 mm Table area: 3,000 x 1,400 mm Rodpfxezui Has Adzocf Press weight: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, Year of manufacture: 2017 GSW Schwabe, Type: RMA 50/78, Year of manufacture: 2017

Condition: good (used), Bar feeder, automatic bar loader for CNC lathe, brand Iemca, model Kid 80, year 2016. Redpoy N R Ttsfx Adzscf

Condition: ready for operation (used), Year of construction: 2011, operating hours: 8,733 h, functionality: fully functional, spindle bore: 26 mm, rotational speed (max.): 7,200 rpm, number of axes: 5, number of tool turrets: 2, Long-turn lathe with an extended accessory package and spare parts! Counter-spindle: Completely re-conditioned 05/2026 TECHNICAL DETAILS CNC control: GE Fanuc Series 18i-TB Number of axes: 5 Axes: X1, X2, Y, Z, C Spindle Spindle speed: 50–7,200 rpm Spindle bore: 26 mm Spindle stroke: 160 mm TURRET Number of turrets: 2 Positions per turret: 6 MACHINE DETAILS Motor power: 3.7 kW Weight: 2,600 kg Spindle hours: 8,733 h Control on: 10,642 h Feed time: 3,257 h Part counter: 478,135 Rjdpfx Adoztn Imozocf EQUIPMENT - Bar feeder FMB Turbo 3-36, year of manufacture 2011 - Chip conveyor - Package of fixed and powered tool holders - Package of collets and guide bushings - Discharge system for long parts including reduction sleeves - Double-cone clamping system on the main spindle, system JBS - Breakage detection for cut-off tools, Detector France - Ejection control, Detector France - JBS guide bushing, not yet installed - Tool presetting device with optics for external tool setup - Replacement worms for chip conveyor - Mounting device for adjusting the cylinder of the working hood - Various spare parts

Condition: used, functionality: fully functional, power: 110 kW (149.56 HP), working height: 160 mm, EWD (Esterer WD GmbH) Type: Combimes BK100 TL-2 (3 movable flanges) Rjdpszwb D Ajfx Adzocf Year of manufacture: 1990, Mechanization 2006 3 movable flanges Cutting height: 160 mm Wood lengths up to 7 m The EWD Combimes BK100 TL-2 is an automatic edging line for the economical processing of boards and planks in sawmill operations. The machine features a pneumatic air measurement system to detect the workpiece contour and automatically determines the optimal cutting line to maximize wood yield. The workpieces are automatically measured and fed to the adjustable circular saw units. The robust steel construction, precise feed, and automatic cut optimization ensure high dimensional accuracy and reliable continuous operation. Technical data * Manufacturer: EWD * Model: Combimes BK100 TL-2 * Machine type: Automatic edging and resawing line * Year of manufacture: 1990 * Application area: Edging and resawing of boards and planks * Measuring system: Pneumatic air measurement * Workpiece alignment: Automatic alignment according to the optimal cutting line * Cut optimization: Automatic determination of the most economical edging * Saw units: Servo-hydraulically adjustable circular saw units * Feed: Automatic, frequency-controlled feed * Control: EWD optimization control * Machine frame: Welded steel construction for industrial continuous operation Processing data * Workpiece length: approx. 1,200–6,000 mm * Workpiece width: approx. 80–700 mm * Workpiece thickness: up to approx. 160 mm * Max. feed speed: up to approx. 210 m/min * Main motor: 110 KW * Performance: up to 22 workpieces/min (depending on workpiece dimensions and system configuration)

Condition: excellent (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, overall weight: 3,320 kg, We offer you our 2-part line here: Pallet stack distributor EPAL 1, 800x1200 mm for stacks of pallets placed on top of or inside each other, with a conveyor belt and a machine for rotating EPAL1 pallets, EPAL1 800x1200mm, TYPE OPZL 800. They are fully functional, but we have not used this machine. For sale are the first 3/4 of the sorting line. Part 1: Destacking – the stack is loaded and tilted. The pallets individually move onto the conveyor belt. Part 2: Pallets that are rotated due to nesting are turned over by automatic detection. Part 3: The pallets run over a rotary table, where a pallet can be inserted or removed depending on whether it needs repair or to be sorted out. Part 4: The pallets are stacked on top of each other via another conveyor belt. We would prefer to keep the stacker, but we can still come to an agreement if it is absolutely necessary. Rcodjzvn Thjpfx Adzsf Please feel free to contact us if you have any questions. The line was ordered new and delivered and tested in July 2025, but unfortunately, it has not been used for current orders and is not planned for use in the near future. Please feel free to contact us if you have any questions. We can gladly send you all the documents.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, Rcedpfxow D T Uio Adzjf * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 152855, Item 25078 Technical specifications: - Cutting area at 90°: round 550 mm - flat 570 x 550 mm - Cutting speed continuously adjustable from 20 to 100 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure continuously adjustable from 0 to 10 m/min - Automatic material feeder Rodpev Say Aefx Adzjcf - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW - Stop - 2 x roller conveyors 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg

Condition: used, Frequency-controlled multi-purpose automatic surface sander or Heesemann MFA 8 dual-belt cross-sander for sanding flat wood-based materials and/or painted workpieces (interim sanding of painted surfaces) with a vacuum mat and a huge stock of sanding belts. Technical data: - Working width: 1300 mm - Clearance height: max. approx. 140 mm - Unit 1: Electronic pressure bar - Unit 2: Cross-grinding - Unit 3: Longitudinal grinding Rodpsztvz Isfx Adzjcf - Unit 4: Cleaning brush