Used Atlas Copco Xas 125 for sale (401)

Condition: good (used), Year of construction: 2009, operating hours: 63,000 h, functionality: fully functional, machine/vehicle number: API 656 564, overall weight: 1,213 kg, total length: 2,000 mm, total width: 1,300 mm, total height: 1,968 mm, power: 90 kW (122.37 HP), fuel type: electric, pressure (min.): 3 bar, pressure (max.): 13 bar, noise level: 74 dB, type of cooling: air, Equipment: documentation/manual, type plate available, The system was used to operate dry ice blasting equipment. A 5,000-liter tank was connected upstream and is included in the offer. After our relocation, the system was no longer put into operation. Ibsdpfxjxd Umqs Aacoc The system additionally features a water heat exchanger, allowing the waste heat to be used for heating.

Condition: excellent (used), Year of construction: 2012, operating hours: 14,785 h, functionality: fully functional, Second hand oil-free compressor Atlas Copco ZT250FF. 250 kW, 10 bar with 42 m³/min. Integrated drum dryer. Isdpfxsxdwr Aj Aacebc

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Iedpfx Aaop N H Hujcjbc Unfortunately no documents available.

Condition: ready for operation (used), functionality: fully functional, power: 168 kW (228.42 HP), fuel type: diesel, color: yellow, overall weight: 16,600 kg, chain condition: 70 %, Year of construction: 2012, operating hours: 6,921 h, Equipment: air conditioning, cabin, Year of manufacture: 2012 Hammer operating hours: 6,921 h Total operating hours: 17,063 h Enclosed cab Ibedpfexhchwex Aacjc Air conditioning Rear view camera 6 drill rods (complete set) Drill bit with diameter of 85 mm Fuel filling pump CAT C7.1 Tier 4 Final engine with 168 kW CE/EPA Undercarriage 70% remaining Only one previous owner, always fully serviced Manufactured in Sweden Operating weight: 16.6 t Additional information: Drill holes from 64 mm to 127 mm possible Max. drilling depth: 37 m.

Condition: used, Year of construction: 2001, operating hours: 70,000 h, overall weight: 5,000 kg, power: 250 kW (339.91 HP), pressure (max.): 10 bar, type of cooling: water, Well-functioning oil-free compressor (also suitable for Spareparts Airend) Iodsxbdrdopfx Aacjbc

Condition: excellent (used), functionality: fully functional, power: 48.6 kW (66.08 HP), overall weight: 1,400 kg, Year of construction: 2017, operating hours: 1,896 h, ATLAS COPCO COMPRESSOR XATS138 7.00m3 2017 Mobile compressor ATLAS COPCO XATS 138 with aftercooler and WSD80 (water separator) Iodpfxoxanyis Aacebc Complete service performed – all filters and fluids replaced. Also equipped with a brand new battery. Technical specifications: Capacity: 5.00–7.00 m3/min; Working pressure: 7–10.3 bar; Year of manufacture: 2017; KUBOTA engine Operating hours: 1896 Compressor fully operational.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SF22+, overall weight: 687 kg, power: 22 kW (29.91 HP), volume flow: 144 m³/h, operating pressure: 8 bar, Atlas Copco compressor SF22+ dryer CD45+ set Oil-free compressed air compressor Pressure: 8 bar Capacity: 2.4 m³/min 22 kW Weight: 687 kg Year of manufacture: 2024 Unused compressor and dryer set All employees speak Dutch, German, and English Prices are exclusive of VAT Shipping possible (subject to extra charges) (Changes and errors in technical data, information, and pricing as well as prior sale reserved) Ijdpexby H Djfx Aacsbc

Condition: excellent (used), functionality: fully functional, We currently have over 15 Atlas Copco GA90 units in stock in various configurations. Frequency-controlled. With integrated dryer. Iedpsxctxisfx Aacjbc

Year of construction: 2008, condition: ready for operation (used), 1) Reciprocating compressor Prematic PAKO 1201/270, year of manufacture: 2008, displacement: 1200L/min, flow rate: 925L/min, tank volume: 270L, speed: 700rpm, power: 7.5kW, operating pressure: 10bar, operating hours: approx. 5257h. 2) Screw compressor Atlas Copco GA7FF, year of manufacture: 1999, operating pressure: 8bar, flow rate: 1092L/min, power: 7.5kW, speed: 3000rpm, weight: approx. 250kg, operating hours: 14057h. Documentation available. An on-site inspection is possible. Ibodpexf Iinsfx Aacjc

Condition: excellent (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 1.55 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 11 FF screw compressor With refrigerated dryer On a 500 l pressure vessel Ibedpoxn Atgjfx Aacec 11 kW motor Capacity 1.55 m³/min Pressure 13 bar Year of manufacture: 2017 Compressor serviced, filters and oil replaced.

Condition: used, Year of construction: 2001, operating hours: 90,000 h, overall weight: 7,000 kg, power: 355 kW (482.67 HP), operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Good working oil-free compressor, also suitable for spare parts (motor, airend, coolers) Ibodjxbdppepfx Aacjc

Condition: good (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 - Operating hours 16550 h Ibedpewrcq Njfx Aacjc - Operating pressure 10 bar - Delivery rate 15.9 l/s - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Required space approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Iedpfxjrp D Uxj Aacobc Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 25,283 h, functionality: fully functional, Screw compressor Atlas Copco GA90FF. 90 kW with 8.25 bar and 16.48 m3/min. Integrated dryer. Ijdpfxexctmye Aacobc

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 479, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching STV-ST61-30-40 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: STV-ST61-30-40, year of manufacture: 2017 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz Ibsdpfjulayxex Aacoc For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Year of construction: 1999, condition: used, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 11049 Specifications: - 1999 model - Hours: approximately 12,750 - Winch - Vacuum cleaner - 38 hammers - 4 cylinder water-cooled Deutz engine - Okay chassis - Ready for delivery Description: Owner says it works as it should and that it is a 1999 model Ibsdpjxlnlisfx Aacoc It is Ready for Delivery Own weight: 1 Model: Copco

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, Compressor in excellent condition, rewound motor. The machine is operational and tested. Technical specifications: Max pressure: 10 bar Power: 90 kW - 110 HP Ibsdpfxsxn Sw Is Aacoc Capacity: 16,200 liters/min

Condition: used, Year of construction: 2016, operating hours: 30,370 h, functionality: limited functionality, machine/vehicle number: API261282, overall weight: 279 kg, power: 15 kW (20.39 HP), volume flow: 150.6 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, The time and date function is defective, which is why we are selling it. Otherwise, the compressor works perfectly. Ibedexdw Tyjpfx Aacec

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), volume flow: 1.56 m³/h, noise level: 65 dB, Equipment: documentation/manual, type plate available, Continuously serviced, excellent condition. Iedpforn S Hpex Aacebc Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2002.3. Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Condition: reconditioned (used), Year of construction: 2007, operating hours: 25,679 h, functionality: fully functional, machine/vehicle number: API510496, overall weight: 1,120 kg, total length: 2,041 mm, total width: 970 mm, total height: 1,802 mm, power: 37 kW (50.31 HP), pressure (max.): 7.3 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Technical data: Model: Atlas Copco GA37+ FF Power: 37 kW (50 HP) Air flow: 7.09 m³/min Maximum pressure: 7.3 bar Cooling: Air-cooled Year of manufacture: 2007 >> Operating hours Total hours: 25,679 h Load hours: 6,340 h Motor starts: 298,730 Number of load cycles: 717,977 Ibedpfewtntlsx Aacoc >> Reconditioning work performed: Complete inspection (screw block, motor, modules) Replacement of consumables (filters, oil, etc.) On-load performance tests Cleaning & final quality check >> Warranty & Delivery: 6-month warranty (parts and labor) Delivery: 2–3 weeks after order >> Price: €6,000 net (excluding VAT)

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 454, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching ETP ST32-10-I06 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: ETP ST32-10-I06, year of manufacture: 2022 Power supply: 200-240 V/ (50-60 Hz) Ijdpfx Aajulaxzjcjbc Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: new, Atlas Copco ROTO Synthetic Fluid FOODGRADE 20 liter container Also available in 5 liter containers From stock sale We are on vacation until 06.01.. Your request will be processed afterwards. Isdsvkf A Hopfx Aacsbc Warranty and returns are excluded from this advertisement.

Condition: excellent (used), Year of construction: 2009, operating hours: 40,000 h, functionality: fully functional, INVERTER COMPRESSOR, ALREADY OVERHAULED APPROX. 10,000 HOURS AGO. NEW VALUE: EUR 82,528. MAIN FEATURES: Ibedpfexn Sv Rjx Aacoc MAX PRESSURE: 13 BAR POWER: 55 kW – 70 HP FLOW RATE: 11,280 LITRES/MIN

Condition: like new (used), Year of construction: 2016, operating hours: 3,890 h, functionality: fully functional, INVERTER COMPRESSOR WITH INTEGRATED DRYER, LIKE NEW, ONLY 3890 HOURS. NEW LIST PRICE: EUR 56,199. MAIN FEATURES: MAX PRESSURE 13 BAR, OUTPUT 5100 L/MIN, POWER 26KW-35HP. Ibsdpexnx Dhefx Aacjc

Condition: like new (used), Year of construction: 2014, operating hours: 5,520 h, functionality: fully functional, INVERTER COMPRESSOR WITH INTEGRATED DRYER, LIKE NEW, FEW HOURS. NEW LIST PRICE: EUR 31,200. MAIN FEATURES: Ijdpoxnxz Tsfx Aacobc MAX PRESSURE: 13 BAR POWER: 15 KW – 20 HP CAPACITY: 2,940 LITERS/MINUTE