Used Atlas Copco Xas 37 for sale (359)

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP Csdpfx Adjzv Ei Hjhjhc * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: used, Year of construction: 2020, operating hours: 5,945 h,

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAS137 portable compressor, equipped with an aftercooler, fully serviced. Technical data: flow rate: 7.70 m3/min; working pressure: 7 bar; year of manufacture: 2015 engine: KUBOTA operating hours: 2000 h Chsdpfxozky Nke Adhec compressor in perfect working order, ready for operation, with warranty. net price: 59,500 PLN gross price: 73,185 PLN machine imported in excellent condition. Links to videos are provided below.

Condition: excellent (used), Year of construction: 2011, ATLAS COPCO GA37 SCREW COMPRESSOR, 37 kW, 2011! ATLAS COPCO GA37 screw compressor – machine after service. Technical data: capacity: 6.30 m3/min; engine power: 37 kW; maximum pressure: 8 bar; year: 2011; operating hours: 6924 h!!! Compressor is fully functional, ready for operation, with warranty. Codpfx Aei E Hncedhohc We provide service support.

Condition: used, Year of construction: 2022, ---- Data: Frame: Stationary Codpfx Adszkzc Sshohc Light type: LED Dimensions (L x W x H): 500 mm x 500 mm x 2200 mm Weight: 45 kg Mast type: Manual, vertical Maximum height: 3.5 m Power: 1 x 320 W Wind resistance: 50 km/h Mains frequency: 50 Hz

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Technical specifications: Capacity: 3.60 m3/min; Operating pressure: 7 Bar; Codpfezwmlrsx Adhshc Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video demonstrating the machine in operation.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment. Codpfx Adszzp N Ijhohc

Condition: excellent (used), Year of construction: 2019, Equipment: compressor, ATLAS COPCO XAS88 COMPRESSOR, 5.2 m3, 2019 DIESEL compressor ATLAS COPCO XAS 88, fully serviced Technical specifications: Cedpfx Ajrdf Swodhehc capacity: 5.20 m3/min; operating pressure: 7 bar; year of manufacture: 2019; engine: KUBOTA operating hours: 1519 h!!! compressor in fully working order Below is a link to a video showing the machine in operation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Oil-free compressor ATLAS COPCO ZT37VSDFF, machine with inverter and air dryer. Demonstration compressor, NEW, only 900 operating hours! Year 2023. Technical data: Capacity: 5.80 m3/min; Motor power: 37 kW; Pressure: 8.1 bar; Operating hours: 900 Year: 2023 Service provided. Price: 95,500 PLN net Csdpfx Adexhgmkohohc 117,465 PLN gross Service provided.

Condition: good (used), Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA37VSDFF SERIAL NO.: API580058 YEAR: 2009 POWER (kW): 37 Cedpfxsxyarqj Adhshc CAPACITY (m3/min): 7.25 PRESSURE (bar): 12.5 OPERATING HOURS (DOC/TOTAL): 100392 FREQUENCY INVERTER: yes BUILT-IN DRYER: yes, R404 1.25kg HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: no DOCUMENTATION: no CONNECTION: 2'' NEW/USED: USED

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAHS237+ mobile compressor with final cooler, fully serviced Technical data: flow rate: 14.20 m3/min; operating pressure: 12 bar; year of manufacture: 2015; DEUTZ 6.1 engine; running hours: 1804 h. Compressor in perfect working condition, ready for operation, with warranty. Net price: 148,500 PLN Gross price: 182,655 PLN Machine imported in excellent condition. Chsdpfxoy S T N Ns Adhjc Links to videos are provided below.

Condition: repair required (used), functionality: unexamined, fuel type: diesel, Year of construction: 2017, operating hours: 1,154 h, Atlas Copco XAS 68 DDG compressor, year of manufacture 2017, 1,154 operating hours, volumetric flow 3.5 m³, emergency power 12.5 kVA, connections: 1 x 230 Volt, 2 x 400 Volt, serial no. YA3064303H0461812, axle bent, compressor otherwise fully functional, ABE/registration available. Csdpfx Aoy Aktajdhjhc

Year of construction: 2005, condition: ready for operation (used), A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible. Chedpfx Adsyq R Ewjhsc

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: AII362754, power: 37 kW (50.31 HP), operating pressure: 7 bar, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA37 oil-lubricated compressor is a powerful and reliable machine designed to deliver optimal performance in various industrial environments. This used model, with a power rating of 37 kW, can operate at a pressure of 7.5 bar, making it ideal for applications requiring constant pressure and energy efficiency. Cedpfozpxnvox Adhjhc Manufactured by Atlas Copco, a leader in the compressed air solutions industry, the GA37 is known for its durability and robust design. Thanks to its advanced technology, it ensures quiet operation while guaranteeing the production of high-quality compressed air. Perfect for companies looking to improve their productivity while minimizing operating costs, this compressor is a wise choice for various industrial sectors. Overall, the Atlas Copco GA37 compressor combines performance and reliability, while also offering excellent value for money for a used unit. It is a smart choice for those seeking a proven and efficient solution in the field of oil-lubricated compressors.

Year of construction: 2004, condition: good (used), Atlas Copco XAS 67 air compressor 3.7 m3/min Operating hours: 2,371 hours Cedpfeiywpzsx Adhehc Deutz engine Type: diesel

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. Chsdpfxowlp Hdo Adhsc We invite you to familiarize yourself with our full offer.

Condition: ready for operation (used), functionality: limited functionality, Year of construction: 2011, operating hours: 1,192 h, Equipment: soot filter, Compressor Atlas Copco XAS 67 DDG, built in 2011, 1192 operating hours, volume flow 3.5 m³, emergency power 12.5 kVA, connections 1 x 230 volts, 2 x 400 volts, serial number YA3062566B0165583, approval available, the fuse blows when the emergency power is switched on, downstream soot filter SMF-MR Csdpfsv Rbufex Adhehc

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: A11 702998, Equipment: type plate available, Compressor unit with pressure vessel, air dryer, and additional accessories Chjdpfx Adexvidnjhjc

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, DIESEL COMPRESSOR ATLAS COPCO XAS46DD after service! Compressor registered in Poland. Technical specifications: Output: 2.60 m3/min; Operating pressure: 7 Bar; Engine: DEUTZ F2M1011 Hours of operation: 1355 h!!! Csdpfex A T D Sex Adhehc The compressor is fully functional, ready to work, with warranty. Net price: 13,500 PLN Gross price: 16,605 PLN

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: API502813, overall weight: 970 kg, volume flow: 280.8 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, We offer: ATLAS COPCO GA37 Technical data: S/N: API502813 YEAR: 2005 CAPACITY (kW): 37 OUTPUT (m3/min): 4.5 CIS (bar): 13 Chsdpfx Adjv Hqkuohsc HRS (DOC/GENERAL): 95183 INVERTER: no BUILT-IN DRYER: no EXCHANGER: no COOLED (AIR/WATER): air ON THE TANK: no DOCUMENTS: no CONNECTION: 2' and 1 1/2' S014585

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA Hammer TU 055R rock drill * Compressed air hose Codpfsy Rv Iljx Adhjhc * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, Year of manufacture: 11/2023 Equipment: Construction compressor Atlas Copco MCT, Type XAS 58-7 G, with integrated generator 6kVA, socket: 2 x 360V / 1 x 230V. Unbraked chassis, adjustable in height, initial oil fill, crane eye, closed bottom tray, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO (German Road Traffic Licensing Regulations), operating permit. Accessories: Compressed air hammer Atlas Copco, Type TEX 10 PSKL, weight: 10.7 kg. Compressed air hammer TEX 230 PE, weight: 27 kg. Various pointed and flat chisels, asphalt chisel 115 mm wide, TERRA Hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories 28,000 € net. * New main inspections / safety checks or weight adjustments are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing and typographical errors, changes, prior sale and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organizing special transports We will gladly help you organize special transports. Short-term registration / export license plates We will gladly help you obtain export license plates/short-term registration. Handling customs formalities

Condition: good (used), overall weight: 5,100 kg, fuel type: diesel, fuel: diesel, Year of construction: 2005, PROD - ATLASCOPCO TYPE - XAS426 S/N - YA3-062854-50542371 YEAR - 2005 POWER (kW) - 166 Chedpfet Srw Aox Adhoc PUMP. (m3/min) - 25 CIS (bar) - 7

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA hammer TU 055R earth drill * Compressed air hose Cjdpfx Aoyai Eusdhehc * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, manufactured: 11/2023 Equipment: Construction compressor Atlas Copco MCT, type XAS 58-7 G, with integrated generator, 6 kVA, sockets: 2 x 360V / 1 x 230V. Unbraked chassis, height adjustable, initial oil filling, crane eye, closed bottom pan, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO, operating permit. Accessories: Compressed air hammer Atlas Copco, type TEX 10 PSKL, weight: 10.7 kg Compressed air hammer TEX 230 PE, weight: 27 kg Various pointed and wide chisels, asphalt chisel 115 mm wide TERRA hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories, €28,000 net. * New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Come and see for yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day registrations / export license plates We will gladly assist you in obtaining export license plates/short-term registrations. Processing of customs formalities

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 1,608 h, Atlas Copco XAS 67 DDG compressor, manufactured in 2011, with 1608 operating hours, a flow rate of 3.5 m³, emergency power output of 12.5 kVA, and connections for 1 x 230 volts and 2 x 400 volts. Serial number: YA3062565B0165591. Approval documentation is available. Chsdpfszbiivex Adhoc

Condition: excellent (used), Year of construction: 2006, overall weight: 1,000 kg, volume flow: 425.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA37 PLUS S/N - API510029 YEAR - 2006 POWER (kW) - 37 OUTPUT. (m3/min) - 7.09 Chjdpfsrz Rtbsx Adhjc CIS (bar) - 7.5 HRS (DOC/GENERAL) - 6043 WAVE - no COND. DRYER - no COOLED (POW/WATER) - air ON TANK - no NEW/USED - USED