Used Atlas 1304 for sale (466)

Condition: used, power: 47.5 kW (64.58 HP), fuel type: diesel, overall weight: 5,300 kg, operation weight: 4,965 kg, first registration: 08/2001, Year of construction: 2000, operating hours: 10,500 h, Equipment: all wheel drive, cabin, hydraulics, pallet forks, We are offering this used ATLAS 65 R wheel loader, year of manufacture 2000. Manufacturer: F. Weyhausen GmbH & Co. KG Model: 65 Year of manufacture: 2000 Chassis number: 0592426948 Nedpfx Agsyc Uzmsneku Maximum tractive force: 37.5 kN Operating weight: 4965 kg Engine type: BF4L1011FT Engine power: 43.5 / 59 kW/hp Maximum permissible total weight: 5300 kg Maximum front axle load: 3000 kg Maximum rear axle load: 3500 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1980, width 33 mm Nkedovu Hkmjpfx Agnou bolt-diameter 60 mm

Condition: ready for operation (used), Maximum operating pressure: 13 bar, motor: 7.5 kW, 1.3 m³/min Nsdpfeympigox Agnoku

Condition: used, Year of construction: 1998, operating hours: 30,559 h, functionality: fully functional, overall weight: 825 kg, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 312 m³/h, operating pressure: 8 bar, pressure (max.): 8.5 bar, noise level: 70 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, ❇️ Atlas Copco GA30 FF Screw Compressor – 30 kW, 8.5 bar, Excellent Maintenance For sale is a used but exceptionally well-maintained industrial screw compressor from the premium manufacturer Atlas Copco, model GA30 FF with integrated refrigeration dryer. The unit was built in 03/1998, has received regular servicing, and was in reliable operation until February 2022. ⸻ ❇️ Technical Data • Model: GA30 FF (with integrated refrigerant dryer) • Year of manufacture: March 1998 • Motor power: 30 kW (approx. 40 HP) • Max. operating pressure: 8.5 bar (factory specification) • Free air delivery (FAD): approx. 5.2 m³/min (≈ 312 m³/h) • Connection: 400 V / 50 Hz / 3~ (5-pin) • Fuse protection: 3 × 63 A • Operating hours (at last service): 30,559 h • Weight: approx. 800–850 kg ⸻ ❇️ Maintenance & Condition The compressor was last professionally serviced by DF Druckluft-Fachhandel GmbH on 14.02.2022 with the following parts replaced: • Oil plug • Solenoid valve • Intake regulator kit Since then, the unit has not been operated. It was immediately prepared for decommissioning after servicing and is therefore in ready-to-operate condition. The compressor was stored dry and protected indoors. ⸻ ❇️ Features & Equipment Nkjdpfx Agsykk Raonju • FF model: integrated refrigeration dryer for dry compressed air – ideal for sensitive applications such as spray painting or control air technology • Elektronikon® controller – user-friendly control panel with operating data storage • Sound insulation enclosure (industrial version) • Steel housing – transportable by pallet truck or forklift ⸻ ✅ Ideal for Workshops · Production facilities · Metal and woodworking · Tire services · Sandblasting · and much more ⸻ ❇️ Location & Loading • Location: 71083 Herrenberg (near Stuttgart) • On-site loading assistance available (forklift on site) • Inspection by arrangement is welcome ⸻ ❇️ Price & Contact Price: €3,490 (final price) No VAT will be charged according to §19 UStG. ———— ‼️ Please also check my other listings. It’s worth it! Viewing and collection in 71083 Herrenberg. ⚠️ Shipping (by freight forwarding) or delivery possible at buyer’s expense.

Condition: used, mileage: 1,001 km, first registration: 01/1994, color: red, driver cabin: other, gearing type: other, Year of construction: 1994, Equipment: crane, Vehicle location: Bovenden, Includes rotary head and upper linkage! Overall width approx. 500 mm, capacity approx. 250 l. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, intermediate sale and errors excepted! Nedpeyiu Erofx Agnjku

Condition: excellent (used), Year of construction: 2017, operating hours: 39,772 h, functionality: fully functional, Atlas Copco GA160 screw compressor, 160 kW with 7.5 bar and 30.20 m3/min. Nodoyg I Rcjpfx Agnsku

Condition: used, Year of construction: 1998, feed pressure 8,5 bar Nsdpex Edwujfx Agneku liter capacity . l total power requirement 454 kW

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Nkedpfxexc Uv Aj Agnju

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2014, operating hours: 3,500 h, Atlas Copco XAS97 Compressor – 2750 rpm – 7 Bar – 36 kW – Weight 1060 kg – = Further Information = Year of manufacture: 2014 Nsdpfx Asya I Afjgneku Intended use: Construction Contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the Port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Year of construction: 2020, Vacuum pump / Vacuum system Airflow: 280 m3/h Motor: 7.5 kW Nksdpfexcb Ixex Agnju Vacuum tank: 500 L

Year of construction: 2022, condition: ready for operation (used), A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible. Nsdpfxov Tcq To Agnoku

Year of construction: 2000, condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Nedpfswfg Hhox Agnsku

Year of construction: 2000, condition: ready for operation (used), There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22. Documentation available. On-site inspection is possible. Nedpfx Aoulkvdjgnsku

Year of construction: 2015, condition: ready for operation (used), An oil-free, water-injected Atlas Copco screw compressor is available. Volume flow: 1.3m³-5m³/min, max. pressure: 13bar, motor power: 30kW, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1500mm, weight: approx. 1300kg, operating hours: 46000h. Documentation available. On-site inspection is possible. Nkodpfx Agsudy Sdjnsu

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Nodpfxoxdc Uvo Agneku

Condition: ready for operation (used), An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible. Nkedexuvpnepfx Agneu

Condition: ready for operation (used), There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available. Nedpstnf Iujfx Agnjku

Year of construction: 2008, condition: ready for operation (used), 1) Reciprocating compressor Prematic PAKO 1201/270, year of manufacture: 2008, displacement: 1200L/min, flow rate: 925L/min, tank volume: 270L, speed: 700rpm, power: 7.5kW, operating pressure: 10bar, operating hours: approx. 5257h. 2) Screw compressor Atlas Copco GA7FF, year of manufacture: 1999, operating pressure: 8bar, flow rate: 1092L/min, power: 7.5kW, speed: 3000rpm, weight: approx. 250kg, operating hours: 14057h. Documentation available. An on-site inspection is possible. Nodpexf Iinsfx Agneku

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Nkodpfsxmkc Tsx Agneu

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Nksdpfx Aex Ih D Tegnju

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Nkjdpexu I A Tofx Agnou

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 822 kW (1,117.61 HP), For sale is an oil-free air compressor from Atlas Copco, model ZH6-5, in good, fully operational condition. The unit comes from industrial use and is ideally suited for applications requiring high standards of clean compressed air. The compressor is robustly constructed, making it particularly suitable for industry, food production, pharmaceuticals, or any other sector where oil-free air is essential. An inspection can be arranged by appointment. Nksdpfoyi H Ekjx Agnou Technical specifications: • Manufacturer: Atlas Copco • Model: ZH6-5 • Year of manufacture: 2001 • Max. operating pressure: 8.8 bar • Power: 822 kW • Speed: 2980 rpm • Serial number: S88668802 • Design: oil-free • Quantity: two units available Scope of delivery: • Compressor unit as shown • Integrated control cabinet/controls

Condition: like new (used), Year of construction: 2021, operating hours: 23,369 h, functionality: fully functional, Atlas Copco GA160VSD+FF screw compressor. Integrated dryer and inverter. 160 kW with 8.3 bar and 33.10 m³/min. Equipped with heat recovery system. Nsdpfx Agjyfl Ivenoku

Condition: used, Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Contents: 400 l -Opening width: 1400 mm -complete: with rotary servo -Mounting bolt: Ø 80 mm -Intermediate mounting dimension: 340 mm -Weight: 700 kg Nodpfx Ajx R Sv Ejgnoku

Condition: used, Year of construction: 2010, Operating hours: 58,730 h Technical data: Nodpjydlycsfx Agnoku Max. compressed air pressure: 14 bar Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg