Used Arc Welding Device for sale (19,274)

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Hfsdsd N E Rvspfx Aacsn Test welds with stick electrodes show excellent welding results.

Condition: like new (used), Description of system area This is a pure component delivery Robot Hfodpfx Asudb E Eeacsn KR 8 R 1620 arc (HW) The KR 8 R1620 arc HW industrial robot stands out in its class thanks to its high flexibility and long reach with optimum payload capacity. Furthermore, the robot was specially designed and developed for the welding process. - Nominal payload: 8 kg - Maximum reach: 1621 mm - Number of axes: 6 - Position repeatability (ISO 9283): ± 0.04 mm - Installation position: any angle, floor, ceiling, wall - Protection class (IEC 60529): IP54 - Degree of protection central hand (IEC 60529): IP54 - Hollow shaft The robot mechanics are supplied in the color R0000 KUKA Orange. The color of the base frame differs depending on the robot model (exception: KR 3 AGILUS and KR AGILUS-2, delivered with grey base frame). Linear unit KL 250-3 1CA (carrier length = 8m/ stroke = 7.1m) -further data on request-

Year of construction: 2006, condition: ready for operation (used), A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible. Hodpoviv Dlsfx Aacsfn

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature wire to the commutator for the starter armature by diffusion welding. Diffusion welding machine (also known as polymer diffusion welding machine, diffusion welding, copper soft welding machine, copper strip welding machine), consisting of the main machine and control system, "PLC control, touchscreen operation". Technical specifications: Dual-stage diffusion welding machine Power data: Frequency: 50 Hz Hfsdpfx Aajg Icfpocon Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse: 35 A Water: Supply: 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Find more items - new and used - in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand FANUC Main Drive Number of axis 6 This 6-axis FANUC ARC Mate 100iC welding robot was manufactured in 2011. Ideal for precision welding tasks, it offers robust construction and reliable performance. If you are looking to get high-quality welding capabilities, consider the FANUC ARC Mate 100iC machine we have for sale. Contact us for more information. Hjdpfx Aajwbwzhocofn Application Types Welding

Year of construction: 2002, condition: good (used), Make: HAEUSLER Type: Crocodile Year: 2002 Specifications Metric US Standard Min. shell inner diameter 1500 Max. shell inner diameter 6000 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 20 mm Maximium wall thickness 70 mm Max. section weight 30 T Max. weight total workpiece 120 T Dimensions (Estimate) Length Hfjdekwcnzepfx Aacsn 60000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Hfodpfx Aaepy Uzyjcjn Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Year of construction: 2006, condition: used, Submerged arc welding device, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner Hodpsd Nlf Nefx Aacjfn -Submerged arc welding machine without: power source -Submerged arc welding machine type: Minisaf 02 -Control box SUBARC 3 -Intermediate hose package -Equipment -Dimensions: 1200/800/H500 mm -Weight: 215 kg

Condition: ready for operation (used), Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible. Hfodpfx Aeu N Hc Aeacon

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Year: 2007 Specifications Metric US Standard Min. shell inner diameter 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight 15 T Max. weight total workpiece 60 T Dimensions (Estimate) Length Hjdpfx Aekwcn Eoacefn 24000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Inverter Welding Machine for Manual Metal Arc Welding TECHNOLIT PROFImat 170 Plus Type MMA Welding Machine, Inverter Welding Machine, Manual Electrode Welding Inverter New – unused Serial No.: TB1703500316 Article No.: 440030 Year of Manufacture: 2022 TIG (DC) Output: 170 Amp. 45% duty cycle 150 Amp. 60% duty cycle 135 Amp. 100% duty cycle MMA Output: 170 Amp. 35% duty cycle 145 Amp. 60% duty cycle 125 Amp. 100% duty cycle Adjustment Range: 5–170 Amp. infinitely variable Power Supply: 230 Volt, 50 Hz - Hot start function (optimizes ignition characteristics, making it easier to start welding with difficult-to-ignite electrodes) - Anti-stick function (optimizes electrode control and prevents the electrode from sticking) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Suitable for stick electrode welding, for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with 230-volt Schuko plug - S-mark for welding under increased electrical hazard conditions - Overvoltage protection Dimensions (machine without cables) L x W x H: 310 x 155 x 265 mm Weight (without cables): 7 kg NEW – unused, from stock Hjdpji E Iz Iefx Aacofn

Condition: used, machine/vehicle number: 07180398, Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled Hfodpfxob Hiy Se Aacsn -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

Condition: ready for operation (used), Year of construction: 2022, Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new. Hfedpfjrwzrusx Aacon

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Hjdpfevg Rh Tox Aacofn Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Year of construction: 1986, condition: used, machine/vehicle number: 3824, Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device, turn-tilt tables positioning device -Table: is tiltable 360° -Clamping diameter: 850 mm -Drive: 3.5 kW -Dimensions: 4000/1480/H1350 mm Hsdpfshrfk Hex Aacjfn -Own weight: 2880 kg

Year of construction: 2012, condition: ready for operation (used), The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition. Hfedopu A D Uepfx Aacsn

Condition: used, TIG welding machine, electric welder KESTRA type WIG 350 AC/DC Hsdpfxjdzql Se Aacjfn E-welding machine Serial No. Year of manufacture approx. 1985 Output: 350 amps = 60% duty cycle Adjustment range: 3 stages and fine adjustment Current type: AC / DC Power connection: 400 V, 50 Hz, 32 A plug - 4-metre hose package with TIG torch - 2-stroke / 4-stroke welding function - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with DC and good results when welding aluminium with AC. The HF ignition does not work, the arc can be started via brief contact.

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm Hfodevyq Duepfx Aacsn -Weight: 12.1 kg

Year of construction: 1990, condition: ready for operation (used), With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible. Hfjdpfx Aaeq Ttz Njcjn

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz Hfsdpfxsdzqacj Aacjn - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Container rotating device, welding rotating device, welding rotating device, welding device, welding rotating table, welding rotating and tilting table, welding rotating device, welding rotating tilting table -Manufacturer: Commercy Soudure, welding rotating device swiveling -Type: PM 250 -Load capacity: see photo of nameplate -Control: with foot pedal -Three-jaw chuck: Ø 314 mm, bore Ø 100 mm, base plate Ø 600 mm -Speed: max. 3 rpm right/left running Hodpfx Aeq Ei A Teacefn -tiltable: via crank -Transport dimensions: 1190/720/H900 mm -Total weight: 267 kg

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Hfodsdzqa Hspfx Aacjn Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: used, machine/vehicle number: 1605, Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device, welding turning tilting table -Manufacturer: Kistler, tiltable welding turntable with mobile base - Turntable: Ø 400 mm -Speed: 0.08 to 6.3 rpm / 0.01 to 8m/min at Ø 400 mm Hedoh D Il Tspfx Aacofn - Direction of rotation: right/left rotation -Number: 1x available -Total dimensions: 740/580/H630 mm -Weight: 145kg

Condition: used, Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device, welding turning tilting table -Manufacturer: ESS, double welding turning device, swiveling Hfedpeg T I Nlsfx Aacjn -Turntable distance: 975 mm -Program control device: 2x ESS type PS 2-3 -Direction of rotation: right / left rotation -Welding smoke extraction pipe: without welding smoke filter, can be supplied at an extra charge -Dimensions: 2000/1400 / H1950 mm -Weight: 552 kg

Condition: used, Welding rectifier, electrode welding machine, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type Origo Arc 410c -Welding power: max. 400 A -Welding cable with electrode clamp -Ground cable -Quantity: 1 piece available -Dimension: 920/720/H930 mm -Weight: 182 kg/pc. Hodshgbxhopfx Aacjfn