Used Apk 30 for sale (25,902)

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters - Type STN 30L/1 - 12/27 First registration 02/2024, German registration and from first owner Mileage only 32,771 km V2A stainless steel tank Diameter 2,200 mm Fpodpfxez Am Evj Aikop 3 baffle plates 1 filling dome DN500 with hinged cover Rinsing line 4 inches through the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Complete piping in V2A stainless steel Rotating outlet at the rear in 6", with emptying device 8" suction port at the rear top 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO Trailer-EBS with RSS stability program WABCO Optiturn - OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle: LIFT AXLE Tires: 6x 385 /65 R 22.5 RENTING is the new BUYING; with us, full-service rental is available IMMEDIATELY.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Fpodpfjh D If Hex Aikjp Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Condition: ready for operation (used), Year of construction: 1999, Euromac hydraulic punching machine Type CX1000/30/2000 Capacity 30ton Y-axis reach 1000mm X-axis reach 2000mm X-axis range with repositioning up to 10000mm Fodpepmt Ttjfx Aikepp Control Euromac Eurowin 6-fold multitool + with 6-fold die holder

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons Fodpfxodx R Tfs Aikopp - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno Fpedpfxovta Rkj Aikep We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: refurbished (used), Year of construction: 1999, Fully refurbished Hosokawa Alpine Pharmapaktor APC L200/30 used standalone system by Alpine Originals. Technical details: Construction materials: Non product contacted parts: stainless steel Product contacted parts: stainless steel Fodpfevq Nlxox Aikopp Non pressure shock resistant (NPSR) Non ATEX (can be implemented for an additional price) Without vacuum deaeration (can be implemented for an additional price) Scope of supply: Hosokawa Alpine Pharmapaktor APC L 200/30, including feeding, without Flake Crusher. The Hosokawa Alpine APC L200/30 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end product sizes and forms, from different sort of briquettes to granulates according to the required specification. Thanks to its flexibility, the machine can be adapted to different products and tasks. It even complies with the tough pharmaceutical standards. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: used, Year of construction: 2014, pressure 170 t chamfer lenght 3050 mm distance between columns 2550 mm column arm 405 mm stroke of ram 400 mm distance between table / ram 320-720 mm feed down max. 220 mm/sec feed bending max. 10 mm/sec feed up max. 220 mm/sec connected load 27 kVA total power requirement 18,5 kW weight of the machine ca. 13.600 kg Fjdpfe Advb Hox Aikopp

Condition: new, loading space length: 9,250 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, color: other, NEW VEHICLE – available on short notice. PRICE upon request! Please inquire about our current terms and conditions! We explicitly reserve the right to sell the vehicle before it is sold to you, as we are also offering this item on other platforms. The information on accessories is without guarantee; subject to change, prior sale, and errors. We strongly recommend and encourage a viewing and inspection to avoid any misunderstandings regarding the condition and suitability of the vehicle for the buyer. Viewings and inspections are possible and expressly desired at any time by prior appointment. We will take care of all formalities and hand over the vehicle with the desired transport license plates for an additional fee. The images are partially edited and are only for initial viewing purposes. If you are interested, please contact us and request current images. 45731 Im Wirrigen 38 Langendorf Trading GmbH = Further information = Fedpfx Aez S H Ibeikspp Damage: none Weight: 6120 kg = Further information = Unladen weight: 6,120 kg Payload: 32,880 kg GVWR: 39,000 kg Damage: none VAT/differential taxation: VAT is not deductible (margin scheme)

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2019, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 8,790 mm, color: other, Equipment: ABS, = Additional options and accessories = - BPW Axles - Disc brakes = More information = General information Year of construction: 2019 Registration number: OR-36-ZF Axle configuration Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Fjdpfx Ajz Sz Iijikepp Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.940 kg Carrying capacity: 38.060 kg GVW: 42.000 kg

Condition: used, Polzer frame press – hydraulic, with 4 press plungers and lateral pressure device For sale is a robust Polzer frame press from the machine engineering sector, manufactured in 1992. This press is ideally suited for the production and gluing of wooden frames, doors, window frames, and other frame constructions in carpentry and joinery applications. The four hydraulic press plungers are particularly noteworthy, as they enable uniform pressure distribution and support the precise gluing of frame constructions. The additional lateral pressure device allows the workpieces to be aligned and compressed laterally. This allows frames to be glued together accurately and at right angles. Equipment and advantages - 4 press plungers for uniform and targeted pressure distribution - Hydraulic pressing device for powerful and comfortable operation Fjdpfx Aio Abbd Ijkepp - Lateral pressure device for compressing and aligning the frames - Robust, solid steel construction - Versatile for use with various wooden frame constructions - Ideal for carpentry shops, joineries, and wood processing companies Technical data - Manufacturer: Polzer Maschinenbau GmbH, Herborn - Machine type: according to the nameplate, probably RP 30/21 - Year of manufacture: 1992 - Drive: hydraulic - Mains connection: according to the nameplate, 380 V - Motor power: according to the nameplate, probably 1.5 kW The Polzer frame press impresses with its robust design and the practical combination of four press plungers and a lateral pressure device. This is an interesting machine for anyone who wants to glue frame constructions efficiently, precisely, and reliably. On-site inspection (Luxembourg) is possible by appointment. The price is gross for net within the EU outside of Luxembourg, meaning 0% VAT.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 12,901 h, load capacity: 3,000 kg, lifting height: 4,655 mm, free lift: 1,370 mm, fuel type: gas, mast type: triplex, construction height: 2,191 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,780 kg, total length: 2,800 mm, drive type: Treibgas, construction width: 1,250 mm, Internal combustion forklift Load center: 500 ISO class: FEM 3 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Fjdpfxj Adm Tgo Aikjpp Rear tire condition: 20 - 40% Battery year of manufacture: 2019 Additional single-circuit hydraulics, integrated side shifter, single-pedal operation, load guard, gas tank, 4 work lights at the front, 2 work lights at the rear, CE certificate available.

Condition: used, fuel type: electric, Year of manufacture: 2013 Mast: articulated arm Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Fpodpfx Aiszfm Rwekop

Condition: good (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,960 h, load capacity: 3,000 kg, lifting height: 6,640 mm, fuel type: diesel, mast type: triplex, power: 45 kW (61.18 HP), empty load weight: 5,025 kg, total height: 2,910 mm, Equipment: 3rd hydraulic function, cabin, lighting, sideshift, Diesel forklift STILL RX70-30 Year of manufacture: 2021 According to the meter, 4,960 operating hours 3-ton lifting capacity 2.91-meter overall height 6.64-meter lifting height 45 kW Deutz engine - Triple-stage free-lift mast - Side shifter - Full cabin with heater - Lighting system - Wide front tires - Ready for immediate use Fodpfxs Afuv Se Aikepp - Original paint Selling price: 13,500.00 net Affordable delivery also possible!

Condition: used, machine/vehicle number: 296510, Machine: Bortolin Kemo FOC 23/30 Carton erector FOC 23/30 Fpsdpfs Ahlg Djx Aikep

Condition: used, Year of construction: 2009, Capacity: 10.000 bph Format parts: 0,75 L Bordeaux 310 and 330 and 1,0 L Schlegel Fedpfxo Ahltao Aikspp

Condition: excellent (used), Catalog number 8139 TECHNICAL DATA - max. diameter of the main saw blade with a scoring saw: 300mm - max. cutting height: 100mm - main saw blade adjustable up/down + angle, manually - spindle diameter: 30mm Fsdpfe Ahnhfjx Aikjpp - with a crosscut fence - cutting length on the fence: 3200mm - cutting width adjustable manually with the fence: 1300mm - with a side fence - with a scoring saw - max. diameter of the scoring saw: 120mm / 8500 rpm - spindle diameter: 20mm - main motor: 5.5kW/4000 rpm - diameter of the dust extraction port: 60mm - dimensions of the table with extension and widening: 1730x1390mm - blade guard - dimensions (L/W/H): 3420x3860x1150mm - weight: approx. 800kg ADVANTAGES – Italian made – with a scoring saw – unpainted – DTR documentation – used saw, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: 3033647, load capacity: 3,000 kg, TREPEL - 2 scissor lift tables, type CL 30/16 Serial no. 3033647, year of manufacture 1975 Load capacity 3000 kg Each table is equipped with transport rollers and additional transport rollers are included (loose). Fedpfx Aiozx E Nfekspp

Condition: good (used), Year of construction: 2017, operating hours: 6,175 h, load capacity: 3,000 kg, lifting height: 5,390 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, mileage: 6,175 km, - TRIPLEX forklift - brand: STILL - year of manufacture: 2017 - capacity: 3,000 kg - lifting height: 5,390 mm - equipped with a FREELIFT - equipped with SIDESHIFT - and FORK SPREADER - mast height lowered: 2,500 mm - only 6,175 hours on the meter - battery from 2017 - equipped with an external charger Fpsdpfx Ajzaauyjikep - automatic filling system - watch the video on YouTube

Condition: used, Year of construction: 2005, operating hours: 26,412 h, machine/vehicle number: M359, Used NATE PETBLOCK 30-60-8 filling monoblock 11000 BPHTechnical Specifications & Performance DataThe NATE PETBLOCK 30-60-8 is a used PET filling monoblock designed for high-output beverage production and integration into an industrial packaging line. This filling machine is configured for PET bottle handling and delivers a maximum production speed of 11,000 bph with 1.5L bottles. Its format range supports common bottle sizes for flexible production planning.Manufacturer: NATEModel: PETBLOCK 30-60-8Maximum speed: 11,000 bph for 1.5L bottlesCompatible bottle formats: 0.5L, 0.85L, 1.0L, 1.5L and 2.0LContainer type: PET bottlesNeck finish: 1881Operating hours: 26,412 hAdvanced Automation & Control SystemsThe monoblock is equipped with a Siemens S7-300 PLC, providing centralized control of machine functions and supporting reliable operation within a beverage production environment. PLC-based control helps operators manage production settings, monitor machine activity and coordinate the filling section with connected bottling equipment.The integrated automation architecture makes this second hand filling monoblock suitable for facilities seeking a controlled PET bottling solution with an established industrial control platform.Production Line Integration CapabilitiesThis NATE PET filling monoblock is intended for installation within a used bottling line or as part of a broader PET beverage production system. It can be positioned downstream of PET bottle production or empty-bottle handling equipment and upstream of labeling, secondary packaging and palletizing machinery.Its supported 0.5L to 2.0L bottle formats provide flexibility for production lines processing multiple PET bottle sizes. The 1881 neck finish specification is relevant when matching the machine with compatible closure handling and capping equipment.Machine Condition & Maintenance HistoryThis used filling monoblock has recorded 26,412 operating hours and is stated to remain in operation until 23 December 2026. Continued operation indicates that the machine has been used in an active production setting. Before relocation and commissioning, buyers should assess mechanical condition, product-contact components, format parts, electrical connections and the operational status of the PLC control system.Operational Performance & VersatilityThe PETBLOCK 30-60-8 is designed for PET bottle filling applications in beverage production. With a maximum stated output of 11,000 bph on 1.5L bottles, it offers a practical capacity for industrial packaging operations requiring consistent bottle handling across several available formats.Its PET-focused configuration makes it relevant for production environments handling packaged beverages in plastic bottles. Format capability from 0.5L through 2.0L supports adaptation to different retail and distribution pack sizes.Installation Requirements & Site PreparationInstallation should be planned around the machine's integration with upstream bottle supply and downstream labeling, packaging and conveying equipment. Site preparation should includ... Fjdpfo Aia Eaex Aikjpp

Condition: used, empty load weight: 4,900 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 01/1980, loading space volume: 28 m³, suspension: steel, tire size: 365/80 R20, wheelbase: 1,150 mm, color: red, Drum brake Fpedevwmbkspfx Aikep Payload 28,100 kg BPW axles 3 covers top and bottom Errors excepted

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Fsdpfxoz R Nb Nj Aikopp Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Make of bodywork: Groenewegen Jumbo Plywood Box Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: refurbished (used), power: 30 kW (40.79 HP), type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 3,500 rpm, Used Vakumix inline homogenizer with 30 kW, horizontal design on castors – for retrofitting to existing vessels and mixing plants. For homogenizing, dispersing and emulsifying in recirculation or single pass for cosmetics, pharma, food and chemicals. EQUIPMENT • Drive power 30 kW, PLC controlled • Suction connection DN 100, discharge DN 80 • Front suction inlet DN 25 for liquids Fpedpfx Aeyf N Hvjikep OVERHAULED • New control system • New frequency converter • All seals new incl. mechanical seal DELIVERY • Delivery time approx. 4 weeks, international shipping possible Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: new, axle configuration: 3 axles, total length: 120,000 mm, total width: 25,500 mm, Equipment: ABS, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front = Notes = Ebert TL 30 ST Forestry Special Lowboy Trailer, completely flat bed, self-supporting construction. Permissible total weight: 30,000 kg, unladen weight: 5,900 kg, payload: 24,100 kg, dimensions 12,000 mm x 2,550 mm (also available in a longer and wider version), fully air-suspended, last axle with trailing linkage, SAF axles. Mr. Ebert (tel. ...) will be happy to assist you. You can find more information on our website. Errors and prior sale are subject to change! Fpjdpfx Asyfq Afsikjp = Further Information = Unladen weight: 5,900 kg Payload: 24,100 kg GVW: 30,000 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2020, Format: 10 x 120 mm Fpjdpo Aihqbsfx Aikop Equipment: Integrated Control USB interface Timing: Automatic adjustment to the conveyor speed Wipe-on application method Legal Opinion (RH) Label sensor

Condition: used, mileage: 603,000 km, first registration: 09/2026, fuel type: diesel, fuel: diesel, color: other, gearing type: automatic, Year of construction: 2013 Axle 1: left 14 mm right 14 mm Fodpfxozzi Rro Aikopp Axle 2: left 7-7mm right 7-7 mm Axle 3: left mm right mm