Used Angle Plant for sale (9,479)

Condition: excellent (used), Angle welding machine Make: Meurer Model: CM/W3 Year of manufacture: 2002 Welding frame: 460 x 700 mm Kedex Tpf Njpfx Adtswt 220 volts Length: 1950 mm Depth: 770 mm Packing table height: 870 mm

Condition: used, Angle table with 5 T slots 12 mm T slot width Length 680 mm width 260 mm Height 265 mm Kedpfocu Im Dsx Adtewt

Condition: used, Year of construction: 2014, operating hours: 88,000 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Biogas CHP unit Kodpfx Aox R Tp Hsdtswt Brand: Jenbacher Model: JMS 416 (1189 kW) Year of manufacture: 2014 Fuel: biogas Maintenance history: complete overhaul at 62,859 operating hours in August 2022 Operating video available For more information, please contact us

Condition: excellent (used), Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, Bosch CHP Complete System (1 Set) – CHP CE 140 N (Year 2016) including Cabero Heat Exchanger/Dry Cooler (Year 2017) Kodpoycl Absfx Adtowt For sale is 1 complete, homogenous CHP unit consisting of 1× Bosch CHP Module CE 140 N (gas-powered CHP) including the corresponding peripherals as well as 1× Cabero heat exchanger/dry cooler. The unit is operational and in very good condition. Sale only as a complete package. 1) CHP / CHP Module Manufacturer: Bosch KWK Systeme GmbH Model: CHP CE 140 N Year of manufacture: 2016 Engine: MAN 2867 E 218 (gas-powered Otto engine) Performance data (CE 140 NA / typical as per datasheet series): Electrical output (nominal, 90/70°C): 70 – 140 kWel Thermal output (nominal, 90/70°C): 106 – 212 kWth Gas input: 192 – 384 kW Modulation range: 50 – 100 % Net efficiency: electrical 36.5 %, thermal 55.2 %, total 91.7 % Power supply: 400 V / 50 Hz, 3-phase Own energy consumption (electrical): 2,500 W Max. operating pressure (heating circuit): 6 bar Acoustics / emissions (CE series): Module noise level: 71 dB(A) NOx (dry, 5% O₂): ≤ 0.250 g/Nm³ CO (dry, 5% O₂): ≤ 0.300 g/Nm³ Dimensions (CE 140 NA – indicative values): Width W ≈ 1,160 mm Length L ≈ 3,850 mm Required room height min. ≈ 2,900 mm Wall clearance A > 900 mm 2) Cabero Heat Exchanger / Dry Cooler (1 unit) Manufacturer: Cabero Designation / Item No.: GCDD099MB-2X7-64-S D (EB) EC AXI A Version / Standard: PED / DIN EN 14276-2:2011 Year of manufacture: 2017 Heating surface: 2,742.65 m² Medium: Ethylene glycol 34% / Water 66% Fluid Group: 2 Max. allowable pressure (PS): 12 bar Test pressure (PT): 17.16 bar Permitted temperature range (TS): −40 / +60 °C Volume: 439.5 L Pressure test date: 03./04.07.2017

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers Kwjdjxu Dipspfx Adtet • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.

Condition: excellent (used), Year of construction: 2004, operating hours: 9,067 h, functionality: fully functional, overall weight: 19,000 kg, power: 315 kW (428.28 HP), Doppstadt AK 430 Profi Shredder/Chipper/Remote/Magnet • Manufacturer: Doppstadt • Model: AK 430 Profi • Year of manufacture: 2004 • Operating hours: 9,067 • Engine: 6-cylinder Mercedes engine • Power: 315 kW / 430 HP • Magnetic drum • Radio remote control • Hydraulic self-propulsion • Hydraulic rear conveyor • Hydraulic support wheels • Loading length: 2.94 m • Loading height: 2.18 m • Discharge height: 2.80 m • Conveyor belt length: 3.80 m • Number of hammers: 36 pcs • Features: Rear discharge belt • Discharge belt as new Ksdpjx El Dfefx Adtowt • Road approval with a maximum speed of 80 km/h • Total weight: 19,000 kg • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale in accordance with our general terms and conditions.

Condition: good (used), Angle bracket, locksmithsquare, flat angle Kodpfx Aex Tpdljdtewt -Flat angle: Leg length 1000 x 660 mm -Number: 2x flat angles available -Price: per piece -Dimensions: 1000/660/H12 mm -Weight: 10 kg/pc.

Condition: good (used), Stop square, locksmithsquare, hair square, precision hair square, control square -Manufacturer: Horex, stop square DIN 875/2 -Type: 1000 x 500 mm Kedpfx Adsx Tn U Nstjwt -Accuracy level: 2 -Quantity: 5x angle brackets available -Price: per piece -Dimensions: 1010/500/H50 mm -Weight: 7 kg/pc.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Complete Automatic Packaging and Palletizing Line by Concetti S.p.A. This state-of-the-art installation, manufactured by Concetti S.p.A., is a fully automated line for weighing, bagging, sealing, palletizing, and stretch wrapping of products—particularly designed for granular materials. It is composed of the following main modules: Electronic Weighing System (Net/G type) with stainless steel contact parts, high precision (+/- 0.2%) and integrated dust extraction. Automatic FFS Bagging Machine (Model FFS-E 600) for forming and filling PE tubular film bags, with thermal sealing. Articulated Robotic Palletizer (Model PS-4A/15S-A) with KUKA robot arm, programmable interface, and high-capacity handling for full bags. Automatic Stretch Wrapper (Model P 60 E) with turntable and top-sheet dispenser for dust-proof and hermetic wrapping. The entire system is compliant with CE directives and is equipped with high-quality components from Siemens, Festo, SICK, Rexroth-Bosch, and more. 🔎 Suggested Search Keywords: Concetti bagging line Automatic packaging machine FFS bagging machine Fish feed packaging system Robotic palletizer KUKA Pallet stretch wrapper P60E Industrial bagging and palletizing Weighing and bagging line Used Concetti packaging machine Siemens S7 packaging line Net/G electronic weigher Turnkey bagging solution Palletizer with articulated robot Kedpeuzgyfjfx Adtewt PE bag forming and sealing machine High-speed bagging system

Condition: good (used), functionality: fully functional, Hard rock splitting plant - essentially consisting of: Feed hopper SVEDALA H-36 cone crusher Dosing hopper SANDVIK H-200 cone crusher plant, with pre-screening machine Dosing hopper with discharge belt Kwodpfx Aeufih Dedtet 2 x double deck screening plants approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm various conveyor and stockpiling belts Complete electrical installation with control cabinet in container

Condition: ready for operation (used), SBM Austria stationary crushing plant consisting of: *Hopper *Vibrating chute: 3500 x 1000 mm driving: two pieces vibration motors of each 4 kw. *Grizzly screening machine 2000 x 1000 mm, 2 decks driving: 11 kW e-motor. *Percussion crusher type: RHS 13/11/4 feed opening: 1100 x 1000 mm driving: 160 kW e-motor. Ksdpfxex Evc Ss Adtjwt *Including steel construction and discharge conveyors.

Condition: ready for operation (used), functionality: fully functional, saw drive: 13,200 W, Well-maintained complete width-adjustable sash saw system LINCK type BV. Right-hand machine. Frame width 760 mm, stroke 600 mm, max. passage height 710 mm. Complete with log infeed, sash carriage with auxiliary carriage. Split wedge with roller conveyor, cross transfer, and model return. Sash saw with new saw tensioners. Reducing gear and frame including 132 kW motor with belt drive 310 rpm. Various spare parts can be purchased as a package. Dismantling at buyer's own responsibility. Full truck loading after dismantling can be offered. Kwedpfext Uvqox Adtst

Condition: used, Used 5.9 MW Wartsila Vasa 18V32DF dual fuel cogeneration plant built in 1998 with ABB HSG 900 LS8 generator. Plant includes: - Wartsila VASA 18V32DF engine. This is a turbo-charged, intercooled four stroke gas engine with direct pilot fuel injection with the following specifications: Vee configuration, 18 cylinders, 320mm cylinder bore, 350mm stroke, 750 rpm, 2 inlet valves/cylinder, 2 outlet valves/cylinder, clockwise rotation and nominal output of 5901 kWm. Kwjdpfx Adow U A I Eotjt - ABB HSG 900 LS8 generator. This is a self-cooled, 3-phase, brushless, synchronous, two bearing type generator with the following specifications: 7235 kVA, 0.8 power factor, 11000 V, 380 A, 50 Hz, 750 RPM, 900 RPM, insulation class F, IP21 protection and IEC34 standard.

Condition: used, (2) Unused cryogenic nitrogen gas generating air separation units with capacity 200 mTPD combined. Each system was designed to produce a flow rate of 3,334 Nm3/hour (100 mTPD) at 115 PSIG and 0 degrees Celsius. The nitrogen produced is of the highest purity, meeting industry standards as follows: - Oxygen (O2): maximum 3 ppm v/v - Moisture (H20): maximum 3 ppm v/v - Total hydrocarbons (THC): Maximum 1 ppm Ksdpfjw U A Irsx Adtjwt - Carbon dioxide (CO2): Maximum 0.5 ppm v/v - Carbon monoxide (CO): Less than 1.5 ppm v/v (when incoming air CO

Condition: excellent (used), Year of construction: 2014, operating hours: 31,347 h, functionality: fully functional, power: 800 kW (1,087.70 HP), Equipment: documentation/manual, MWM CHP plant for decentralized electricity and heat generation in electrically controlled, grid-connected operation Controllability 50-100% Technical specifications: Electrical output in kW (electrical): 800 Efficiency: Electrical: 42.3% Thermal: 45.5% Total: 87.3% Kodpjxfgxbofx Adtjwt Emission values: NOx 500 mg/Nm³

Condition: new, Year of construction: 2018, Automatic L-sealer Manufacturer: Diez Model: AWS4535 Year of manufacture: 2018 No operating hours! Welding frame: 500 x 350 mm Belt width: 32 mm External dimensions: 170 x 130 x 135 cm Kodpfowriuujx Adtewt

Year of construction: 2018, condition: good (used), Fully automatic L-sealer / Fully automatic side sealing machine Manufacturer: Diez Model: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Model: HTC 122-40D Year of manufacture: 2018 Operator side: On the left in the direction of travel Pass-through width: approx. 600 mm Pass-through height: approx. 190 mm Sealing length: approx. 900 mm Working height / conveyor height infeed-outfeed: approx. 860 mm +100 Kwodpfxstzcd Ss Adtjt Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1 Ph + N + PE Power consumption: 3.5 KW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 21126ä

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives Kwodpomck Ryjfx Adtet - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: new, functionality: fully functional, Year of construction: 2026, RCMI 280 Three-roll profile bending machine Technical characteristics: Section modulus 720 cm³ Main shaft diameter 280 mm Side shaft diameter 280 mm Outside diameter of the bending rolls 720 mm Adjustable rolling speed 0-4 m/min Installed power 44 kW (60 hp) Weight 34,000 kg Standard equipment: Hydraulic adjustment of the side rolls 3 rolls powered (3 hydraulic motors + 3 planetary reduction gears) Independent lateral profile guide rollers, adjustable in 6 directions, fully hydraulic Kwedpoiivhdofx Adtot Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Digital displays for the rolls position of the side rolls

Condition: new, functionality: fully functional, Year of construction: 2026, Specifications R-62 Standard rolls diameter: 460 mm Diameter of the central / side shafts: 180 /160 mm Kwjdpfsiinllox Adtst Motor power: 15 kW Rotation speed: 0-7m/min Net weight: 8,000 kg Standard version R-62S: Vertical working position Hydraulically variable speed of rotation on all three rolls with hydraulic motor. one motor for the top roll, one motor for the side rolls Automatic speed compensation between top and side rolls Hydraulic adjustment of the side rolls Digital displays for the position of the side rolls Fully hydraulically adjustable guide rolls SKF ball or roller bearings in all journals Hardened gears running in oil Hanging control unit with mini joysticks for all control functions with digital displays Emergency push button Complete set of adjustment tools Operating and maintenance manual

Condition: new, functionality: fully functional, Year of construction: 2026, Technical characteristics: Section modulus 100 cm³ Main shaft diameter 130 mm Side shaft diameter 130 mm Outside diameter of the bending rolls 410 mm Adjustable rolling speed 0-6 m/min Installed power 18.4 kW (25 hp) Length 1,900mm Width 2,200mm Height 1,900mm Weight 5,720 kg Kwodpfxed Eqg Ne Adtst Standard equipment: Hydraulic adjustment of the side rolls 3 rolls driven (3 hydraulic motors + 3 planetary reduction gears) Independent lateral profile guide rolls, adjustable in 6 directions, fully hydraulic Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Digital displays for the roller position of the side rollers Optional, installed: Siemens NC control PGS-CLASSIC

Year of construction: 2011, condition: used, work piece width 60 mm workpiece height 15 mm bore diameter 16 mm saw-blade dia. 350 mm workpiece length - max. 6.000 mm Kwsdpfxsgvkcwj Adtst Roll lenght Einlauf 10.000 mm threading M12 total power requirement 15 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 12,0 x 2,0 x 2,3 m

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 662509, warranty duration: 6 months, Used machine – Year of manufacture: 06/2011 Refurbished by specialist, comes with 6 months warranty* The Quadro Filius is a program-controlled machine designed for the gentle processing of all types of bread roll dough. The following types of rolls can be produced: - Rustic rolls, square - Triangular rolls - Seeded sticks The machine stands out for its high flexibility in the production of these baked goods for small and medium-sized operations. It can be combined with downstream seeding units or a rotary table system. Operation is via a text display. The machine has been final inspected and tested with dough by our master baker. Equipment: + Head unit, year of manufacture 06/2011 + 3-row cutting roller + Triangle punch + Moistening station, moistens dough pieces from above and below + Seeding station with rotary table + Integrated SIEMENS control: operation via text display + Cutting device door can be folded up + Equipped with new belts + Adjustable flour duster on dough strand + Supplied with operating manual Additional cutting rollers and punching tools available at extra cost. Kjdpsw A Nxzefx Adtewt *Excluding: controls / boards / displays / sensors Technical data: Year of manufacture: 06/2011 Output: 1,400 – 4,000 pieces per hour (depending on product & cutting roller) Dough throughput: approx. 320 kg/h (depending on product) Dough yield (TA): up to 170 (depending on product) Weight range: 25–360 g (depending on product & cutting roller) Machine body: stainless steel, brushed Cladding panels: stainless steel, brushed Connection: 230/400 V, 1 kW, 50 Hz, 16A CEE plug Compressed air: 6–8 bar Net weight: 280 kg Cable length: 3 m

Condition: used, Year of construction: 2000, Storage location: Nattheim Kwsdpfx Adsvwdmwjtet

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Storage location: Nattheim Ksdpfx Ajvvi Ttjdtowt