Used Amada Hfa 330 for sale (226)

Condition: used, Year of construction: 2013, Type: Circular saw Hfedpsyn Hc Hofx Afcef Manufacturer: Amada Model: CMB 75 CNC Year of manufacture: 2013 Condition: Used Quantity: 1

Condition: like new (used), Year of construction: 2016, Manufacturer: AMADA Model: HFE M2 2204 8-axis press brake Year of manufacture: 2016 Serial number: HFE-M2-220.4 LK101025 Number of axes: 7 (8-axis configuration) Pressing force: 2,200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Bending angle measurement: digital angle sensor Stroke: long stroke (extended) Connected load: 20 kW Hfsdpex Trw Ijfx Afcjf Operating hours: 10,238 h Dimensions and weight: Weight: 17,970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Additional equipment: 1 tool holder (stainless steel) 2 tables with equipment

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 441 h, machine/vehicle number: LCG3015AJ, laser hours: 228 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 2 mm, table length: 3,070 mm, table width: 1,550 mm, travel distance Z-axis: 100 mm, type of cooling: water, compressed air connection: 6 bar, overall weight: 9,300 kg, total length: 10,136 mm, total width: 2,840 mm, total height: 2,432 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, The machine is in as-new condition. It is connected to power; test cuts are possible. Nozzle changer: 8 stations. Hsdpfxox Tft Ao Afceff

Condition: ready for operation (used), A fully automatic hydraulic horizontal band saw Amada in scissor design is available. Round cutting capacity: 254mm, rectangular cutting capacity: 254mm/279mm, saw band dimensions X/Y/Z: 3505mm/27mm/0.9mm, speed: 80m/min, feed: 390mm/stroke, max. cutting length: 3500mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/1500mm, weight: approx. 1250kg. An on-site inspection is possible. Hfsdeym Dggjpfx Afcsf

Condition: excellent (used), Technical data: Working length: 4100 mm Frame width: 3650 mm Pressing force: 220 tons CNC control: OPERATOR OPII graphic Color display size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motorized adjustable backgauge Throat depth: 300 mm Hfodpfxsykkrks Afcef Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: AMADA tools (new) The seller is not liable for typographical or data transmission errors. The machine is in a condition regarding appearance, technology, and wear appropriate to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad Hfedpoxaa N Nofx Afcjf engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397088

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type Hfedpfx Aoxabnyjfcef - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3100 mm Frame width: 2760 mm Press force: 170 t CNC control: OPERATOR Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge Throat depth: 410 mm Hfjdpfx Afsyi Updocof Stroke: 200 mm Working height: 960 mm Motor power: 16.5 kW CE mark Dimensions (Length x Width x Height): approx. 3500 x 2200 x 2900 mm Weight: approx. 11 tons Accessories: 1 pc. new upper tool 1 pc. new 4-sided die The seller is not liable for any typographical or data transmission errors. The machine is provided in a condition appropriate to its age for appearance, technology, and wear; used machines are sold without any guarantee or warranty.

Condition: excellent (used), Year of construction: 2003, Technical specifications: Working length: 4230 mm Distance between uprights: 3650 mm Pressing force: 170 t CNC control: AMADA Operator III graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 motorized adjustable backgauge Stroke: 400 mm automatic crowning Working height: 960 mm Motor power: 16.5 kW CE marking Dimensions (length x width x height): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tons Accessories: automatic measurement of the workpiece bending angle with automatic correction in the control system Hfsdpfx Afoyi Ud Uecof lateral movable safety fences LAN network operation infrared light curtain at the front and rear Condition: Very good condition, only 9,000 operating hours The seller is not liable for typographical or data transmission errors. The machine is sold in accordance with its age, using, technical condition and wear; used machines are sold without any guarantee or warranty.

Year of construction: 2011, condition: ready for operation (used), General Data Hodpex D H I Hjfx Afcoff Machine weight 4700 kg Control Unit Brand AMADA Main Drive Pressing force 500 kN Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending

Condition: used, Clamping device for table band saw, wood band saw, firewood saw, automatic band saw, material positioning, saw band rollers, saw band roller Hjdpfx Ajgal Avjfcsff -Saw band roll: made from metal saw Amada HA-400 W -Diameter: 595mm -Shaft: Ø 50 x 70 mm -Receptacle: M16 x 2 -Dimensions: Ø 595 x 193 mm -Quantity: 1 piece available -Weight: 51kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm -Stroke: 585 mm -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg Hfsdegag Ahspfx Afcjf

Condition: excellent (used), Year of construction: 2008, Technical Data: Laser type: CO2 Travel: X-axis: 1260 mm Y-axis: 1260 mm Z-axis: 100 mm Max. workpiece dimensions: 1250 x 1250 mm Max. workpiece weight: 160 kg Laser power: 2 kW Cutting capacity (steel): 12 mm Control: FANUC 16 iL Resonator: FANUC AF 2000 Compressed air requirement: 20 m³/h Electrical connection: 400 V / 50 Hz Connected load: 70 kVA Dimensions (L x W x H): approx. 3200 x 2200 x 2100 mm Weight: approx. 4.2 t Special equipment: HS-2003 sensor cutting head High-pressure cutting device: Clean Cut Hsdeyigrzopfx Afcoff Aluminum cutting device: Alu Cut Exhaust system Cooling unit The seller accepts no liability for typing or data transmission errors. The machine's visual and technical condition, as well as wear, correspond to its age; used machines are sold without any warranty.

Condition: used, CNC punching machine AMADA ARIES 245 with CNC control AMADAN 04PA Hfsdpfex Rp Uxex Afcof Punching capacity: 20 t Machine weight: 7,500 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) Hfodpfx Aow Iq Ugjfcjf - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Year of construction: 2004, condition: used, table length 1250 mm table width 1250 mm burner heads 1 Control Fanuc Hfjdjhly Hljpfx Afcef output 1000 Watt travel -z axis 100 mm travel x / y 1260/1260 mm traversing speed 30/30/42 mm/sec gas consuption 10 Liter/Std. total power requirement 22 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 10 m

Condition: used, Year of construction: 2006, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm max travel X-axes 700 mm Z1+Z2 axes controlled by cnc nein, manuell 4 finger mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 43000 h length 3100 mm width 1600 mm Hfodpfxetv Rlbj Afcjf height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m Control Amada OP2002 All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 2008, table length 2550(5040) mm table width 1550 mm burner heads 1 axis stroke (X,Y,Z) 2520(5040)x1550x300 mm laser capacity in Watt 4000 watt control AMNC-F Number of working hours 34981 h Steel sheet steel 12 mm Thickness V2A 8 mm Thickness Alu 6 mm Cutting speed X/Y/Z 80/80/60 m/min max. table load 330 kg Laser gas consumption L/h Dimensions of machine: length 6000 mm width 2600 mm height 2300 mm Hjdpfsvf Rhdsx Afcoff weight 7,7 t Power connection 69 kVA

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm Hjdpfoxyzzajx Afceff max. opening beam/table 620 mm C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 24000 h length 3380 mm width 1800 mm height 2750 mm weight 6100 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 31,835 h, laser type: CO₂ laser, laser source model: AF4000i-B, laser power: 4,000 W, sheet thickness (max.): 22 mm, sheet thickness stainless steel (max.): 15 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 920 kg, overall weight: 10,500 kg, total length: 6,750 mm, total width: 2,850 mm, total height: 2,300 mm, Equipment: cooling unit, documentation/manual, dust extraction, fume extraction, OPPORTUNITY!! We offer a used Amada FOMII 3015 NT laser cutting machine, year of manufacture 2012. Amada FO MII 3015 NT Laser Cutting Machine Operating hours: 31,835 h (at the time of documentation) Service: see logs from the control panel Working area (cutting surface): 3070x1550 mm Maximum workpiece weight: 920 kg Resonator power: 4 kW (oscillator AF4000i-B) Hfjdpjywz A Uefx Afcsf Machine weight: approx. 10,500 kg Machine dimensions (W x D x H): approx. 6750x2850x2300 mm Manuals and some spare parts included. More technical data can be found in the photos and in the file below ("Installation Summary"). Serial number: 092 / 2712 Installation date: 2014 Load capacity: 3,000 kg Max./min. sheet size: 3000x1500 mm / 2000x1000 mm Net weight: approx. 12,700 kg Dimensions without edges, "balcony," and front table: W x D x H approx. 4300x2450x5100 mm The machine is in perfect condition—very well maintained, serviced regularly. Price for the complete set: laser + storage tower Amada LC3015M2 / ASLUL300FOM2 Includes chiller, filtration system, etc. For any questions or if you need additional information, please send us a message or call. The machine is already secured and prepared for transport. Machine pickup in Radom.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, AMADA CNC Laser Cutting Machine Type: ALPHA Laser LC 2415 III Year of manufacture: 2001 Laser power: 3000W CNC control: Fanuc Series 160i-L Table length: 5040 mm Table width: 1550 mm Sheet thickness up to 12 mm Table load up to 330 kg Travel path X: 2520 mm Hfsdpfx Ajxv Skdofcsf Travel path Z: 300 mm Travel path Y: 1550 mm Cutting speed: 20 m/min Rapid traverse speed X/Y/Z: 80/80/60 m/min Positioning accuracy ±0.01 mm/500 mm Repeatability ±0.005 mm Compressed air: 6/20 bar Drive: 10 kW Weight: 6.6 t Complete accessory set

Year of construction: 2010, condition: ready for operation (used), A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. On-site inspection is possible. Hfsdpfx Aev Rp Tcofcef

Year of construction: 2010, condition: ready for operation (used), A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible. Hfsdpfx Aoxv A E Ssfcsf

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Hjdpjwm Nn Rofx Afceff

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Hfsdpjwhp N Dsfx Afcjf