Used Alu Silo Ca 45 Cbm Vol for sale (22,782)

Condition: new, Year of construction: 2025, Sawblade tiltable 0-46 ° Length of the rolling table 3200 mm cutting width 1000 mm Motor output 5,5 kW Cutting height 179 mm Cutting height at 45° 123 mm Saw blade diameter 500 mm Speed 3/4/5000 U/min. Dkedpfx Aaszycp Es Hot weight of the machine ca. 1300 kg

Condition: used, maximum load weight: 34,740 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space length: 8,870 mm, loading space width: 2,325 mm, loading space height: 2,100 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 3,637 mm, Year of construction: 2026, Equipment: ABS, STAS 3-axle HardoX steel tipper, 45 cbm, "X-Shape" First registration: 03/2026 New vehicle Dimensions (L x W x H): 8,870 x 2,350/2,450 x 2,100 mm (tapered design in width) Unladen weight: only 7,260 kg Z-chassis, curved design Floor: continuous 5 mm HardoX steel HB450 Dkodpfx Ajziwl Hoa Het Front and side walls: 4/3 mm HardoX steel HB450 Sloping front wall, with internal steps 2-wing portal doors, pneumatic secondary release 1 grain slide in the right door leaf Reinforced roof cover, central locking HYVA tipping cylinder, Alpha type, suitable for high and low pressure ALU saddle supports, full load capacity 2 air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with starting aid WABCO trailer EBS with anti-roll protection RSS WABCO Smartboard Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on the right 4 LED reversing lights RENTING is the new BUYING; with us, full-service rentals are immediately available.

Condition: used, Year of construction: 2002, Lunex 1650 laminating machine, year of manufacture 2002. Laminator by German company LUNEX, year of manufacture 2002 maximum format 1650x2000 mm Semi-automatic machine for laminating E, B, C, EB flute corrugated board as well as solid board. Automatic feed of the material to be laminated from the pile, manual feed of printed sheets. Automatic glue application. Top sheet grammage from 120g/m2 to 600g/m2. New vacuum transfer belts. Dkodpjy Hrckofx Aa Het The machine is in good technical condition. If you have questions or need further information, please contact us.

Condition: used, empty load weight: 5,530 kg, maximum load weight: 30,470 kg, overall weight: 36,000 kg, first registration: 09/2023, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: white, Year of construction: 2023, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 41519 Kaessbohrer, tipping silo * Year of manufacture: 2023 Dkjdpfozlbgaox Aa Hjt * ABS, Anti-lock Braking System * Aluminum rims * Air suspension * Air coupling (red + yellow) * 2x7-pin connector * 15-pin connector * Lifting and lowering mechanism * Storage box / toolbox * Tipping silo * Hose compartment left and right * Folding ladder + railing * Suspension: Air * Total weight: 36,000 kg * Unladen weight: 5,530 kg * Payload: 30,470 kg * Permissible total weight: 36,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 60% - 50% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 70% - 70% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 50% - 50% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, mileage: 460,000 km, power: 330 kW (448.67 HP), first registration: 04/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, DAF CF450 4x2 tractor unit for hazardous goods FL/AT/EXII/EXIII, Euro6, automatic transmission, Intarder, ACC, lane departure warning, long-distance driver's cab flat roof, leaf air suspension, differential lock, auxiliary drive, alloy wheels, air conditioning, sand heating, seat heating, single-family house Dedpfx Ajyy Hdiea Hokt

Condition: new, empty load weight: 6,900 kg, maximum load weight: 28,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 11,000 mm, loading space width: 2,420 mm, loading space height: 2,000 mm, loading space volume: 53 m³, total length: 12,050 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 385 / 65 R 22,5, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Vehicle location: in feed / in transit, aluminum body, 3-axle, SAF axles, grain outlet, portal doors Body: Body approx. 53.2m³, ARCHIVE PHOTO! Drum brakes, The vehicle is still under construction and will be completed! Location: Hoym ( FAG ) ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Djdpsvhg Hbjfx Aa Hjkt - .

Condition: used, maximum load weight: 35,460 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 07/2021, loading space length: 13,300 mm, loading space width: 2,430 mm, loading space height: 2,500 mm, loading space volume: 83 m³, Equipment: ABS, Kögel Port 45 BDF Multi Chassis Reefer Container Carrier Bi-Temp. Internal No. for inquiries: 0226131 * Overall condition: very good * ABS * First registration: 07/2021 * Multi Chassis * 3-axle, air-suspended * BPW axles * Drum brakes Dkedpfxszch Hij Aa Hjt Reefer container Tonglee Internal No. for inquiries: 0226132 * Refrigeration unit: Carrier - Vector * Bi-temperature * Partition on the left/right Dimensions of cargo space/loading area * Length of cargo space: 13,300 mm * Width of cargo space: 2,430 mm * Height of cargo space: 2,500 mm Tires: * 1st axle: 385 / 55 R22.5 30% air-suspended * 2nd axle: 385 / 55 R22.5 30% air-suspended * 3rd axle: 385 / 55 R22.5 30% air-suspended ----Price: ,- Euro + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, Polish, French, and…? Typographical errors, errors and prior sale are subject to change.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH CS-50, a 50-ton capacity cement silo, is designed for high efficiency in various industrial applications such as concrete plants, block production lines, and ground survey applications. This silo, which can be produced in either bolted or welded types according to need, can be easily transported with one 40 ft OT container or a truck thanks to its 2-set bolted version. Its compact structure and modular assembly feature provide a significant advantage, especially in terms of field installation. The CS-50 silo is supplied complete with all standard equipment, including a maintenance platform, cement filling pipe, internal and external manholes, safety guards, roof flanges for the air filter and pressure relief valve, and a butterfly valve cone flange. In addition, it is delivered fully equipped with a screw conveyor, air filter, pressure relief valve, level indicators, and fluidizing nozzles of the desired length. In bolted type production, silo parts are manufactured with high precision using laser cutting and drilling technology and are easily assembled on site. Each silo is coated with a 140-micron-thick, 1-layer anti-corrosive primer and 2 layers of epoxy paint to ensure long-lasting corrosion resistance. Furthermore, all static and mechanical analyses are performed using ANSYS Workbench CAE software; thus, the silo can safely store 50 tons of cement or similar materials without any deformation. CS-50 - 50-Ton Cement Silo Technical Specifications Silo Capacity: 50 tons / 38 m³ Silo Height: 15000 mm Silo Diameter: Ø 2400 mm Number of Silo Feet: 4 Silo Outlet Diameter: Ø 300 mm Number of Components: 8 Silo Weight: 6160 kg Foot Material: 168 x 5 mm Steel Pipe Foot Supports: NPL 60 mm Metal Sheet Foot Plates: 15 mm Metal Sheet Conical Support Material: 100 mm Steel C Channel Conical Part Material: ST-37, 5 mm Plate Body Material: ST-37, 4 mm Plate Top Cover Material: ST-37, 4 mm Plate Filling Pipe: 4" Steel Pipe Internal Manhole: Available External Manhole: Available Roof Guardrail: Available Dedpfx Aasxphvvj Hskt Maintenance Platform: Available Why Choose the CS-50 Cement Silo? CONSTMACH combines quality, durability, and engineering power in cement silo production. The CS-50 model offers long-term use with its high-strength steel structure, portable modular design, and international standard production process. It provides uninterrupted support for your projects thanks to its structural safety verified by high-precision analyses, ease of maintenance, and quick assembly advantage. By choosing CONSTMACH, you get not just a cement silo, but a reliable, performance-oriented investment that will operate trouble-free for many years. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2013, operating hours: 1,700 h, machine/vehicle number: M292, Used Filling Monoblock Alfatek for olive oil 1500 bph General Features of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH The ALFATEK MBV 9/1 VOLUMETRICA SABRY filling monoblock, built in 2013, offers an efficient and reliable solution for bottling edible oil. It operates at a speed of 1500 bottles per hour, with clockwise rotation and a fully automated workflow. In fact, the machine currently runs in active production, having completed approximately 1700 operating hours. Moreover, it includes all safety protections, user manuals. Container Compatibility and Supported Formats The Used Filling Monoblock Alfatek for Olive Oil 1500 BPH handles a wide variety of containers. Specifically, it works with both PET bottles and metal cans, supporting the following formats: PET 138x138xh253 mm PET 148x148xh320 mm PET 81x81xh236 mm Dkedpfx Aaowiu Rvs Hst PET 63x63xh184 mm Cans 150x92xh192 mm Cans 150x92xh261 mm Cans 149x120xh315 mm Consequently, the machine adapts easily to diverse packaging needs. Whether the production involves small household bottles or larger industrial formats, this monoblock provides the required flexibility. Additionally, this versatility reduces the need for multiple machines, optimizing both space and investment. Filling Section: Volumetric Technology The filling section of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH uses 9 volumetric valves. These valves deliver accurate and repeatable dosing, which is especially important for high-viscosity products like olive oil. Notably, the system uses fixed valves and operates in a non-isobaric configuration. Therefore, it suits still liquids and avoids the complexities associated with pressurized systems. Furthermore, the volumetric method helps maintain product integrity while minimizing waste and overfill. Press-On Capping: Compatibility and Sizes The machine applies plastic press-on caps using one capping head, which supports multiple cap dimensions: Ø51.5 x 23 mm Ø37.5 x 22 mm

Condition: used, mileage: 405,651 km, power: 191 kW (259.69 HP), first registration: 03/2014, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: white, suspension: steel-air, loading space volume: 14 m³, Year of construction: 2014, Equipment: air conditioning, electric window regulation, Applicable material: Fuel Tyre size: 315/80R22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 7.600 kg Carrying capacity: 11.400 kg GVW: 19.000 kg Dedey Nlabepfx Aa Hskt Number of compartments: 4 = Additional options and accessories = - PTO

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Dedpfxemza Ilo Aa Hokt Cell size 3, 45 x 3, 45 µm Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Transmission system: Digital serial transmission Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. Lens mount: C screw mount

Year of construction: 2017, condition: excellent (used), functionality: fully functional, We are offering this very well-maintained bulk material silo, including currently calibrated/certifiable weighing technology, year of construction 2017. This is a GRP (glass-fiber reinforced plastic) bulk silo (50 cbm) with certified weighing technology. Equipped with premium brand components (Reich Silo, Siemens Siwarex). The silo is drivable underneath and is currently used as a pellet filling station. Features: - GRP silo with 50 cbm capacity - Substructure with 3.0 m clearance height - Weighing system (weighing container, rotary valve, etc.) => dispensing possible down to 20 kg as the smallest delivered quantity - Loading unit/hose (can be fitted with bag attachment), height adjustable via manual winch - Control system (switch cabinet, EC card device/reader, receipt printer, data transmission, remote maintenance) Dedpoy Ey Sqefx Aa Hekt Comprehensive documentation is available (structural calculations, foundation plans, etc.). Manufacturer: IFA (system integrator) Year of manufacture: 2017 Condition: very good Category ID: 399 Type: Bulk silo with certified weighing technology Location(s): Upon request (company address provided is not the silo location) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, maximum load weight: 34,310 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 02/2009, next inspection (TÜV): 12/2026, loading space volume: 55 m³, total length: 11,500 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2009, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: Spitzer feed silo, 55 cm, 6 chambers, 6 dome lids (Vehicle 872) First registration: 06.02.2009 Type SF 27/55/4P ID 1532, manufactured 2009 -40/ +80 degrees Celsius 2.0 bar operating pressure Permissible gross vehicle weight 34,000/40,000 kg Unladen weight 5,690 kg Useful volume 28,040/33,040 kg Overall length 11,500 mm x overall width 2,550 mm x overall height 3,950 mm TÜV (technical inspection) valid until 12/2026 1 x LED reversing light 1 x LED work light at the front + center + 1 x on the passenger side at the rear 55 cbm capacity 6 chambers, 6 dome lids on top Air suspension with lifting and lowering function Loosening mechanism Pressure gauges Outlets/fillers on the outside and at the rear Next internal inspection 12/2027, next external inspection 02/2029 Storage box on the passenger side at the front in the frame + plastic storage box on the passenger side at the front 2 x 12-ton, 2-speed geared winch Air suspension with start/stop function (red + black) 1st axle: lift axle with switch BPW drum brakes ALCOA aluminum rims Dksdpjzyzffofx Aa Hjt Tires 385/65R22.5, 1st tire approx. 80/90%, 2nd tire approx. 50/80%, 3rd tire approx. 80/90% Reversing camera Foldable access platform with walkway 4 x wheel chocks Hose compartment/open storage on the driver's side Price: €15,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties, up to a dispute value of €10,000, is the district court of Ludwigslust; for dispute values exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits Dkedpfx Aajyrd U Uo Hst - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: used, mileage: 1,001 km, first registration: 01/1999, color: orange, driver cabin: other, gearing type: other, loading space volume: 16 m³, loading space length: 5,600 mm, loading space width: 2,300 mm, loading space height: 1,250 mm, Year of construction: 1999, Vehicle location: Bovenden, steel superstructure, flap Body: Bender tipper body approx. 16m³, hydr. flap opening, roof protection, Hardox body Frame width rear 770mm Body is dismantled from Daimler Benz SK 3544 8x8 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dkedpfsvhig Rsx Aa Hjt - .

Condition: used, mileage: 793,000 km, power: 345 kW (469.07 HP), first registration: 06/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, tail-lift, Volvo FH 460, animal feed, 4-chamber silo, X-Track Assist, camera, full air suspension, Euro 6. For inquiries: 0826718 * Condition: very good * Power: 345 kW / 460 hp * Engine displacement: 12,777 cc * Euro standard: Euro 6 * AdBlue tank on the right side * X-TRACK ASSIST * X-TRACK DIFF LOCK Dsdpfx Aajzuqdgj Hjkt * ABS * EBS * Differential lock, rear axle * Lane keeping assist * Adaptive cruise control with emergency braking assist * LCS – Lane Change Support System * Roof hatch, electric * Air-suspended comfort driver’s seat * Suspension: Air / Air (full air suspension) * Automatic climate control * Auxiliary heater * Sleeper cab * Storage compartment above the bed * Electric windows, driver / passenger * Electrically heated and adjustable mirrors * CD radio / AUX / USB / Bluetooth * Reversing camera * Fog lights * External sun visor, transparent * Underrun protection Body: 4-chamber silo for animal feed Manufacturer: FFB Compressor: RTI Tires: 1st axle: 385 / 55 R 22.5, air-suspended | 25% 2nd axle: 315 / 70 R 22.5, air-suspended | 30% ----Price: €34,900 + 19% VAT For further questions, you can reach us on the following phone numbers: We speak: German, English, French, and…? Typographical errors, errors, and prior sale are subject to change.

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. Djdpjmb U Tfefx Aa Hekt A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: excellent (used), Year of construction: 2013, I sell the double mitre saw without scoring throughfeed COMEC TD2400 + CA. Working width 167 to 2400mm. Dkodpfxot Rn Sms Aa Hjt Max. saw profile 80 x 100mm Angular setting of each head: Radial +50° / - 50° Axial +45°/ - 45° Saw blade diameter fi.350/30mm Motor power 1.85KW + 1.85 KW Magazine for elements. Return of the element to the operator Condition like New. Fully working and ready for use. Possible to try. Available immediately. With CE and complete documentation.

Condition: used, mileage: 490,000 km, power: 353 kW (479.95 HP), first registration: 07/2007, fuel type: diesel, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2007, TITLE: VOLVO FM480 HOOKLIFT – LEAF SPRING SUSPENSION 1ST AXLE, AIR SUSPENSION 2ND & 3RD AXLE, LEAF SPRING 4TH AXLE 8X4 REF: 24C91 YEAR: 07/2007 POWER: 480 hp DISPLACEMENT: 12,780 cc EMISSION STANDARD: Euro 5 KM: 490,000 TRANSMISSION: Manual DIFFERENTIAL LOCK: Yes RETARDER/INTARDER: Yes AXLES: 4 (8x4) WHEELBASE: 4,900 mm TRAILER: No ORIGIN: Imported Djdpfoxp Sv Tex Aa Hjkt CAB: Short, low-roof SEATS: 2 PAYLOAD: 18,650 kg – GROSS VEHICLE WEIGHT: 32,000 kg fully loaded / 40,000 kg for construction use – TRACTOR + TRAILER: 44,000 kg BODY TYPE: New hooklift system HOOKLIFT MODEL: TAM T40-66 (42 t) TELESCOPIC EXTENSION: Yes ROTATION: No ROLLER TYPE: Vertical ADR: No BODY COMPATIBILITY FROM: 5.00 m + 0.20 m TO: 7.00 m + 0.20 m TOTAL LENGTH: 9.15 m TOTAL LENGTH WITH CONTAINER: 9.45 m ACCESSORIES: – 2 hydraulic cylinders on the fourth axle – Front and rear clamps – Hydraulic lines for crane and/or trailer – Chassis clearance: 1.38 m – New automatic bell – Pneumatic controls in cab REFURBISHED: Yes INSPECTED: Yes TYRE CONDITION: 50% PRICE: €87,500.00 + VAT Errors and/or omissions excepted Displayed prices are exclusive of VAT. Please contact our sales department for updated pricing and conditions. For more information: Loris: +39 348 477 3001 URL: #thespecialistsofhooklift SCARRABILI AURORA Operates in the purchase and sale of industrial and commercial vehicles, specialising mainly in the waste sector. We specialise in trucks, trailers, and hooklift equipment. Stock available for immediate delivery: over 50 trucks and over 150 skip bins, containers with or without hook cranes. E&O.E. Given the high volume of listings and technical details, Aurora recommends verifying all data directly with our sales team.

Condition: used, maximum load weight: 28,420 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2010, loading space length: 11,250 mm, loading space width: 2,400 mm, loading space height: 2,300 mm, loading space volume: 63 m³, Equipment: ABS, Air suspension, hydraulic lift, BPW axle, EBS (electronic braking system), aluminum rims, support jacks, electrical connectors, access ladder, PVC half-shell fenders, UFS folding aluminum ramp, AFS (automatic folding system) on both sides, front wall 5 mm, floor 7 mm, combination rear wall, walkway with ladder, PVC roll-up tarpaulin with central locking, 2x toolboxes, loading pressure gauge, warning sign. Djdszzha Espfx Aa Hjkt

Condition: used, Year of construction: 2018, Operational unit. Ask for additional information and pricing! Dkodpfjy Ny Umjx Aa Hst Machine is stored and put on a pallet recently.

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. Dkjdpfx Aemb U Tuoa Hst • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: used, maximum load weight: 11,370 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2019, total width: 2,600 mm, total height: 3,710 mm, Equipment: ABS, tail-lift, * Schmitz SKO 18 FP 45 Cool – ACCIDENT VEHICLE – VIN: WSM000002008460 – * ACCIDENT DAMAGE AS FOLLOWS: Frame of the roller door bent – roller door jams and is deformed – underride guard and front right storage box damaged – side wall scratched – roof edge right side dented – further vehicle damage cannot be excluded – * – Trailer is fully operational – low-coupled with 50 mm kingpin – * Refrigeration unit: Frigoblock EK 13 U – tail lift: Bär 2,500 kg – * Air suspension – SAF axles – disc brakes – Tyres: 385/65 R 22.5 – * Loading platform length: 9,500 mm – Total length: 10,095 mm * Loading platform width: 2,450 mm – total width: 2,600 mm * Interior height: approx. XXXX mm – overall height: 3,710 mm * Permissible gross weight: 18,000 kg * Unladen weight: 6,630 kg – Payload: 11,370 kg * German vehicle – German registration certificate – one owner Dodpfx Ajxglfpoa Hokt * Please arrange an appointment for viewing * Contact: Mr. Andreas Vogel * The information provided online is non-binding and for descriptive purposes only. * They do not constitute guaranteed characteristics. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors, and prior sale.

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Djdpjzump Eefx Aa Hskt Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: used, Year of construction: 2018, Operational condition machine. Available end of March. Ask for a quotation! Dsdpfx Aajyuv Hho Hjkt