Used Altendorf F 45 Elmo for sale (124)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Pgedpfx Aew I Uxceg Dsw Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18-03-12-070, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, Equipment: rotational speed infinitely variable, Manufacturer-refurbished Altendorf F45 ProDrive with angle miter fence and Digit L display! TECHNICAL DETAILS Maximum cutting length: 3,000 mm Cutting width at rip fence: 1,300 mm Table length: 840 mm Main saw blade diameter: 450 mm Saw blade projection 90° with single-sided tilt: 154 mm 90° with double-sided tilt: 154 mm +45° with single-sided tilt: 105 mm +45° with double-sided tilt: 105 mm -45° with double-sided tilt: 78 mm Pedpsxc Ufqsfx Ag Djgw MACHINE DETAILS Power: 7.5 kW (10.20 HP) Dust extraction connection Upper extraction: Ø = 80 mm Lower extraction: Ø = 120 mm Negative pressure: 1,200 Pa at total extraction connection, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Continuously variable speed Template holder Front support roller Air cushion table WGA Digit-L PA 1300 mm CNC

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Pedpotxh Nisfx Ag Djgw

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). Pjdpowf Hdgofx Ag Djgw 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, Power rating: 380V 5.5kW Star-delta switch Edging carriage length: 3200 mm Height adjustment and tilting via handwheel Cutting width: 1000 mm Parallelogram guard with narrow cover Cross table with stop Rip stop Scoring unit WITHOUT miter stop Psdsv Uqa Espfx Ag Dsgw

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,105 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height with scoring (max.): 150 mm, saw blade diameter: 450 mm, height adjustment type: electric, table height: 910 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, power: 7.5 kW (10.20 HP), Altendorf F45 Pro Drive The machine is new and configured as follows: Working height: 910 mm Sliding table length: 3200 mm Control panel at eye level for comfortable operation Cutting height: 150 mm with a 450 mm saw blade Main motor: 7.5 kW with three rotation speeds; features the AKE saw blade changing system 2-axis scoring unit with a safety LED light in the scoring area, enhancing operator awareness when the scoring unit is active Main motor and scoring unit ON/OFF buttons on the sliding table for convenient machine startup Mitre crosscut fence, extendable to 3500 mm, with angle correction Cutting width: 1300 mm with CNC, programmable via the screen Gobjxaudhskr A Tq Djkc Psdpexaudhjfx Ag Dogw Motorized rise, fall, and tilt adjustment (0–46°) for the main saw blade, with automatic cutting height correction when the blade is tilted The Altendorf F45 has long been recognized as the flagship of sliding table saws, consistently setting the highest quality standards for this type of machine.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Pjdjwrfmaopfx Ag Dsgw Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16-08-12-016, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, Equipment: rotational speed infinitely variable, Factory-reconditioned F45 with EvoDrive control & additional features!\n\nTECHNICAL DETAILS\n\nMax. cutting length: 3,000 mm\nCutting width at rip fence: 1,300 mm\nSaw blade diameter: 450 mm\nTable length: 840 mm\n\nMACHINE DETAILS\n\nMotor power: 5.5 kW\n\nFEATURES\nInfinitely variable speed control\nScoring unit\n2-axis scoring unit with tilting function\nRAPIDO for single-sided 2-axis scoring unit\nLED illumination on scoring unit\nDouble roller carriage, 3,000 mm length\nAngle stop 90° – 3,200 mm\nCNC rip fence\nSTEG/second support on double roller carriage\nLASER cut line indicator Podpfx Agexc Ub Se Dogw

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Pgsdpfxewrb U Ts Ag Djw

Year of construction: 1980, condition: good (used), Format panel saw Altendorf F 45 year 1980 S/N 80-8-203 Slide length: 2500 mm Height and swivel adjustment manual with wheel Motor power: 5, 5kW Cutting width: 800 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Weight approx. 1100 kg Psdoipv Rlepfx Ag Djgw technical specification under subject

Condition: good (used), Year of construction: 2003, Tilting table saw Altendorf F45 with ELMO IV-plus package, 2-axis scoring unit, 3m sliding table and Control-Plus control system Sliding table length: 3000mm Saw blade tilt from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Main drive motor: 5.5kW with automatic motor brake Operator panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain dimensions and grooves at both rip fence and crosscut fence Cut width compensation at rip and crosscut fence with tilted blade 600 cutting programs Psdpfxjxw Ii Ss Ag Dsgw Calculator function with result transfer to the corresponding axis Tool management Saw blade diameter up to 450mm Max. cutting height: 150mm Cutting width up to 1040mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence up to approx. 3210mm, electrically adjustable, automatic coupling of the second stop flap for large cutting widths Rip fence fold-down Extraction nozzles: 120 + 80mm Sliding carriage lockable Additional angle stop fence 2 used saw blades and one scorer included 2 riving knives 2-axis scorer unit, electrically adjustable while the machine is running 2 protective hoods 3 emergency stop switches Clipboard at control panel CE mark Machine shows signs of use. No cuts in the sliding table. Original paint (custom paint), touched up in some areas. Machine has 18,985 operating hours. It comes from a furniture factory and was clearly regularly serviced and well maintained. Condition as per original photos. A video of the machine in operation can be sent upon request. Dimensions approx. 3150 x 3750 x 1900mm (LxWxH). Weight approx. 1400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see “more offers from this supplier.”

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, cutting length (max.): 3,300 mm, cutting width at rip fence: 1,650 mm, Equipment: scorer, Top of the line precision tablesaw with fully digital rip fence and crosscut fence. Packaged and ready for shipping! Pjdpfx Asxz Dl Rsg Degw

Condition: ready for operation (used), Year of construction: 1993, Altendorf F45 Elmo TECHNICAL DATA Pjdpfx Ajw Ullasg Dogw - Maximum main saw blade diameter without scoring unit: 450 mm - Electric height and tilt adjustment of the saw blade - Digital angle display - Digital display on the crosscut table, telescopic fence - Digital display on the rip fence - Prepared for the retrofitting of a scoring unit - Arbor diameter: 30 mm - Arbor lock - Cutting length on sliding table: 3200 mm - Cutting width at the rip fence: 1000 mm - Main motor: 5.5 kW - 4 speed settings: 3000/4000/5000/6000 rpm - Electronic speed display - Extraction port diameter: 80, 120 mm - Saw blade guard - Mitre fence Year of manufacture: 1993 Price: 6800.- Function tested

Condition: excellent (used), Altendorf F45 ElmoDrive panel saw, 320 cm sliding table, Vacuum suction cups in the table, Saw aggregate tilting 0-45 degrees, Electronic, motor-driven tilt and height adjustment of saw blade, Right-side fence with motorized adjustment up to 1340 mm, Electronically adjustable 3-axis scorer, 5.5 kW vario motor, speed adjustable via frequency inverter, Maximum blade diameter 500 mm, LED lighting for the scorer, Used machine, in very good condition, Pgjdpexvc Dhefx Ag Dow Few operating hours.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: GM010.0310, cutting length (max.): 3,300 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), Manufacturer-refurbished Altendorf F45 with comprehensive ElmoDrive control system! TECHNICAL DETAILS Carriage Lengths and Cutting Lengths Carriage length (double roller carriage): 3,400 mm Cutting length with angle fence: 3,300 mm TIP-SERVO-DRIVE: 2,990 mm Max. blade diameter: 550 mm Saw Blade Blade diameter: 550 mm Blade projection at 90°: 204 mm Blade projection at +45°: 141 mm MACHINE DETAILS Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse protection: 25 A Dust Extraction Connection Extraction (top): 80 mm Extraction (bottom): 120 mm Negative pressure: 1,200 Pa at main extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Pgedow I Rtcopfx Ag Dew Extendable cross-slide table widening Display DIGIT L

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 2,900 mm, saw blade diameter: 550 mm, power: 7.5 kW (10.20 HP), Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length with angle fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Maximum blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm MACHINE DETAILS Electrical data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Circuit protection: 25 A Dust extraction connection Podpfx Agswynhpj Degw Extraction top: 80 mm Extraction bottom: 120 mm Negative pressure: 1,200 Pa at connection, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder directly at the control Preparation for 2-axis scorer Extended cutting height with one-sided tilt

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 1 - 1000 Top for Solid Wood - New machine - immediately available from stock Bitburg - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large safety hood Double roller carriage, 3,200 mm Scoring unit-ready Rip fence, cutting width 1,000 mm Angle/miter fence 3,450 mm, without length compensation Table extension/widening: Powder-coated surface Saw blade tilting range: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Pgedjxyl Epopfx Ag Dew Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade diameter: 450 mm Display size: 15 inch Working table height: 910 mm Extraction port diameter: 80 + 120 mm Options included: M45102 Rip fence 1000 mm Digit_X Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1996, Carriage length: 2800 mm, anodized version (new carriage), 7.5 kW motor, automatic contactor control, digital speed display, cutting width 1000 mm, table extension 800 mm, without feed !!!! Pgedsw Sy Tgopfx Ag Dew Location: Nattheim

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T68109, cutting length (max.): 3,200 mm, cutting width (max.): 1,000 mm, saw blade diameter: 315 mm, power: 4 kW (5.44 HP), F25 basic equipment - Manual height and tilt adjustment 0–46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) at one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package type 6 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence, 1,000 mm - Riving knife with extraction - Preparation for scoring unit Pgjdpfx Agjwwv Rmo Djw

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1999 Equipment and technical data: - Cutting length: 2,600 mm - Cutting width: 1,000 mm - Cutting height vertical: 0–75 mm - Cutting height at 45°: 0–53 mm - Length stop by scale at angle fence, extendable up to 3,250 mm - Anodised version - Swivelling up to 45° - Digital display of swivelling angle - Motor: 5.5 kW Podjxvnmujpfx Ag Dsgw - Speed: 4,200 rpm - Saw spindle: 30 mm - Saw blade diameter: 300 mm - Table extension: 840 mm - With DUPLEX double mitre fence Dimensions: 2,600 x 1,700 x 1,300 mm Weight: approx. 880 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1985, machine/vehicle number: 85-9-196, This Altendorf F-90 sliding table saw is being auctioned in our industrial auction / machinery auction as part of the insolvency auction of Wietec Fenster GmbH – machining equipment, workshop furnishings, trailers – online. Pjdpfx Agexu Tubj Djgw

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 3 - 1000 with Scorer 7.5 kW (10 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle/miter fence Digit-L, Table extension/table width extension, With proven CDF surface ----- Technical Data ----- Swivel range: 0 - 46°, Pgsdpfxoxyl Ece Ag Dow Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Working table height: 910 mm, Extraction connection Ø: 80 + 120 mm Equipment: Altendorf F 35 Type: III - 1000 7.5 kW (10 HP) 3 speeds (M51064) Angle/miter fence Digit L option (M44154) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T411592, cutting length (max.): 3,200 mm, cutting width (max.): 1,410 mm, saw blade diameter: 3,150 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, F25 basic configuration Pedpfx Aewwuameg Degw - Manual height and tilt adjustment of the saw blade from 0 to 46°, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package Type 4 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence Digit – X, 1,410 mm - Large extraction hood (PSV) - Scoring unit Basic with LED lighting

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Features and technical data: Cutting length: 2800 mm Cutting width: 1300 mm Panel cut size: 2800 x 2800 mm Vertical cutting height: 0-75 mm Cutting height at 45°: 0-53 mm Cross cutting with scale on angle stop: 2800 mm Motor: 4 kW Speed: 4200 rpm Pedpfjxrhh Rex Ag Dsgw Saw arbor: 30 mm Saw blade diameter: 300 mm Table extension: 540 mm Anodised version Tiltable up to 45° Digital display for tilt angle Scoring saw preparation Mitre fence Weight: approx. 880 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2023, The ALTENDORF F 25 offers everything that a sliding table saw a sliding table saw must be able to do. Whether in your first own workshop, for daily use, in industrial production or as a or as a powerful second machine. The F 25 is the space-saving all-rounder that simply makes you Pgsdeqvn Rujpfx Ag Dsw makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded profiles can be easily processed thanks to optimum precision outstanding cutting quality. The one-sided swivel saw blade also enables angle cuts. The smooth-running double roller carriage, based on the Altendorf system, as well as the digital display of height and height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, 3200 mm swiveling, man. Height and swivel adjustment, parallel stop with man. Fine adjustment, angle mitre fence, large extraction hood, PSV ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Rip fence: 1,000 mm with Digit X Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 3,600 / 4,200 rpm, Motor power: 5.5 kW, 7.5 HP, work table height: 880 mm Type: F 25 Version 5 5.5 KW (7.5 HP) 2 speeds Rip fence Digit X, 1000 mm Large extraction hood PSV Without scoring unit, prepared for retrofitting a scoring unit installation of a scoring unit Special price ex stock 54634 Bitburg - available immediately -