Used Alpine for sale (38)

Condition: used, machine/vehicle number: 11796, Rotor diameter: 250 mm Hodpfx Apeyr Ttye Dsnn Rotor width: Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Drive motor: 5.5 kW

Condition: good (used), Year of construction: 1983, Margin scheme taxed according to §25a German VAT Act. You will receive a proper invoice; however, VAT will not be shown separately. Internal article no.: 26012 You are welcome to inspect the machine under power on over 500m² of heated storage area. Leadscrew and feed shaft lathe Hnodpfx Aeyg Dl Aop Don Voest Alpine DA180 Max. swing over bed: 380mm Distance between centers: 800mm Spindle bore: 52mm Tailstock: MT4 Multifix "B" basic holder Chuck guard (with switch) Röhm 3-jaw chuck 200mm Dimensions (LxWxH): 250 x 140 x 140cm Weight: approx. 1200kg The machine comes from a training facility and is in well-maintained condition.

Condition: used, ZINC-COATING PLANT FOR PIPES , made by VOEST ALPINE / LOECO Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Hsdpfx Ajyman Hjp Djnn Zn layer: 400 g/m2 according to DIN 2444 Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444

Condition: ready for operation (used), VOEST DA 360 / Heidenhain digital display -Center height above bed: 400mm Hnodpfx Apjza Dh Re Dsn -Turning diameter above bed: 800mm -Turning diameter above cross slide: 500mm -Turning length: 1000mm -Bar capacity: approx. 87mm -Spindle speed range: 14 - 1000 rpm / 18 spindle speeds -Automatic longitudinal / facing feeds -Automatic rapid traverse on Z-axis -Tailstock MK 5 -Collet chuck 250mm -Multifix base with inserts -Work light -Machine feet -Documentation Dimensions: L x W x H: 3 x 1.5 x 1.7 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: used, Pallet racking system Voest, 22 linear meters, used 🧰 Product features • Manufacturer: Voest • Color: green • Condition: used, see photos • Frames: 6 units, pre-assembled, 4000 x 1100 mm • Beams: 20 units, with 4260 cm clear span, box profile 150 x 50 mm • Safety: 40 units, safety pins, galvanized • Fasteners: 24 units, Hilti concrete anchors • Load capacity: 1,600 kg per level • Field load: 8,000 kg • Load capacity label: included Deep uprights, shelf inserts, and shelf boards available for an additional charge. Hnsdezduraopfx Ap Djn 💰 Price: €990 net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: available immediately • Inspection and collection: possible at any time by appointment We constantly have over 5,000 linear meters of pallet racking systems from various manufacturers in stock. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our terms and conditions, all prices exclude VAT, ex warehouse.)

Condition: used, Pallet racking system by Voest, approx. 55 linear meters, used 🧰 Product features Hodpfxozduqve Ap Djnn • Manufacturer: Voest • Color: green • Condition: used, see photos • Frames: 13 units, pre-assembled, 4000 x 1100 mm • Beams: 48 units, with 4260 cm clear span, box profile 150 x 50 mm • Safety: 96 units, safety pins, galvanized • Fasteners: 52 units, Hilti concrete anchors • Load capacity: 1,600 kg per level • Field load: 8,000 kg • Load capacity label: included Deep profiles, insert grates and insert shelves available at an extra charge. 💰 Price: €2,250 net, excluding VAT • Quantity discount: on request • Shipping costs: available throughout Europe, on request • Delivery time: immediately available • Inspection and collection: possible at any time by arrangement We constantly have over 5,000 linear meters of pallet racking systems from various manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.)

Condition: reconditioned (used), Product Information "Voest Alpine DA 160" Lead and feed screw lathe Voest Model DA 160 Condition: Refurbished Technical Specifications Centre height: 165 mm Distance between centres: 650 mm Swing over bed: 330 mm Swing over cross slide: 190 mm Bed width: 210 mm Lead screw diameter: 25 mm Chuck diameter: 160 mm Tailstock taper: MT 3 Spindle speeds (16): 30 - 2,500 rpm Motor power: 2 / 2.4 kW Quill travel: 100 mm Dimensions (LxWxH): 1,500 mm x 900 mm x 1,650 mm Equipment: - 3-axis digital readout, brand Sino – NEW - 3-jaw lathe chuck - Emergency-stop push button Hnsdpjy Ndqrjfx Ap Den - Multifix quick-change toolholder system, 6 holders - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with Morse taper arbor - Live centre - Lead and feedscrew cover NEW - Chuck guard, secured with limit switch - Operating tools - Operating manual - Machine feet

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup Hjdpfxoy Uhxkj Ap Dsnn - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: ready for operation (used), * Brand: Voestalpine Hjdpfsywmmxex Ap Dsnn * Feed opening: 900 x 680 mm. * Driving: 55 kW E-Motor.

Condition: used, machine/vehicle number: 11795, Rotor diameter: 250 mm Hodpfx Aoyr Tuksp Dsnn Rotor width: Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Drive motor: 5.5 kW

Condition: used, machine/vehicle number: 11647, Rotor blade row: 3 Hsdpfsyr Tmgox Ap Donn Stator blade row: 2 Rotor width: 280 mm Rotor diameter: 280 mm Inlet dimensions: 300 x 300 mm

Condition: used, machine/vehicle number: 11634, Rotor diameter: 600 mm Rotor width: 1000 mm 6-knife rotor – cross-shear cutting rotor 2 rows of stator knives Infeed opening approx. 650 x 100 mm Hsdpfx Apjyr Tl Aj Denn Drive motor 75 kW Machine features: The cross-shear cutting rotor ensures optimal material intake and distribution, resulting in high throughput with reduced energy consumption. Electro-hydraulic opening of the mill housing and screen basket. The screen insert can be rotated 180° and reused after one-sided wear. Rotor knives can be adjusted outside the mill using a setting device, reducing downtime.

Condition: used, machine/vehicle number: 10875, 3-blade rotor 2 rows of stator blades Rotor diameter: 280 mm Rotor width: 600 mm Inlet cross-section: approx. 280 x 600 mm Weight: approx. 800 kg Hnjdpfehqt Hpex Ap Djn

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hnodpfx Ajpgmpdsp Dsn Hold down pressure: 30 bar number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm weight: 2500 kg

Condition: used, machine/vehicle number: 14064, Rotor diameter: 500 mm Hodpfx Apeyyrhtj Dsnn Rotor width: 840 mm Rotor knives: 5 Stator knives: 4 Feed opening approx.: 840 x 500 mm Drive motor: 55 kW

Condition: like new (used), Year of construction: 2023, functionality: fully functional, spindle bore: 77 mm, turning diameter: 300 mm, turning diameter over bed slide: 470 mm, turning length: 1,120 mm, Strung CNC VOEST-ALPINE WNC 300S – Modernizat complet în 2023 cu comandă NCT nouă. Hodpfx Apezcy Dye Donn Se oferă spre vânzare strung CNC profesional VOEST-ALPINE WNC 300S, un utilaj industrial robust, construit în Austria, recunoscut pentru rigiditatea structurală, precizia ridicată și fiabilitatea în exploatare. Mașina a beneficiat în anul 2023 de o modernizare majoră, fiind echipată cu un sistem de comandă CNC NCT de ultimă generație, investiție ce a depășit aproximativ 10.000 Euro doar pentru partea de control și automatizare. Noua comandă NCT transformă utilajul într-o mașină modernă, intuitivă și ușor de operat, oferind funcționalități actuale de programare, diagnosticare și control al procesului de prelucrare. Interfața este dotată cu ecran tactil generos, care permite operarea rapidă și acces facil la toate funcțiile mașinii. Pe lângă modernizarea electronică, utilajul a beneficiat de numeroase optimizări mecanice și ergonomice menite să îmbunătățească productivitatea și confortul operatorului: ușă de acces și inspecție reproiectată, cu deschidere mai mare; suprafață vitrată extinsă pentru vizibilitate excelentă asupra zonei de lucru; geam de siguranță industrial de înaltă rezistență; modificarea și optimizarea sistemului de comandă a universalului; deschidere și închidere automată a bacurilor prin pedală; îmbunătățiri ale circuitelor de automatizare și exploatare; acces mult mai facil pentru reglaje, măsurători și supravegherea procesului de prelucrare. Utilajul se află în stare tehnică foarte bună, fiind complet funcțional și pregătit pentru producție imediată. Lucrează cu toleranțe strânse și oferă stabilitate excelentă inclusiv în operații solicitante de strunjire. Poate fi verificat și testat în funcționare. Deși a fost achiziționat și instalat pentru dezvoltarea activității, mașina nu a fost exploatată în mod semnificativ din cauza lipsei comenzilor, motiv pentru care se oferă acum spre vânzare. Caracteristici tehnice principale Producător: VOEST-ALPINE (Austria) Model: WNC 300S Sistem de comandă: NCT (modernizare completă în 2023) Diametru maxim peste batiu: aproximativ 470 mm Diametru maxim peste sanie: aproximativ 345 mm Lungime de strunjire: până la 1120 mm (în funcție de configurație) Alezaj ax principal: 77 mm Turație arbore principal: până la 3000 rpm Putere motor principal: 37,5 kW Turelă portscule cu 12 poziții Posibilitate utilizare scule antrenate (în funcție de configurație) Contrapunct pentru prelucrarea pieselor lungi Construcție industrială grea pentru absorbția vibrațiilor și menținerea preciziei Greutate utilaj: aproximativ 6 tone, în funcție de echipare. Avantaje pentru cumpărător ✔ Comandă CNC NCT nouă, modernă și intuitivă ✔ Investiție recentă importantă în modernizare ✔ Precizie ridicată și funcționare stabilă ✔ Construcție industrială robustă VOEST-ALPINE ✔ Vizibilitate excelentă asupra procesului de lucru ✔ Automatizare îmbunătățită pentru manipularea universalului ✔ Costuri reduse de punere în funcțiune – utilaj pregătit de lucru ✔ Posibilitate de probă și verificare înainte de achiziție Strungul reprezintă o alegere excelentă pentru ateliere de prelucrări mecanice, producție de serie mică și medie, execuția de piese de precizie, reparații industriale și lucrări complexe de strunjire care necesită rigiditate, putere și repetabilitate ridicată.

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Hnjdpfx Apjyah Rvo Djn Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: used, Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U Hnjdpoxn Ty Refx Ap Don metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg Number of feed stages and threads: 99 Accessories: 3-axis digital display Mobile chip guard over the entire length (plexiglass) Coolant device Rapid traverse in Z and X axes Multifix steel holder size C with 6 interchangeable cassettes Bed stop with micrometer scale Fixed steady rest - 300 mm Taper sleeve for main spindle MK 6 Travelling center point (center point) MK 6 Bed guides in very good condition!

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Pin speed (frame side) : 16 500 rpm Hnedpfx Asx R Avvjp Don Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Handling trolley  

Condition: good (used), Year of construction: 1992, functionality: fully functional, Spindle bore: 42 mm Swing over bed: 330 mm Multifix tool holder Hnjdpfx Apsykahze Djn Tailstock with MK3 taper Speed: 1-4500 rpm

Condition: good (used), Vöest-Alpine Jaw Crusher . Type: STE 4025 K . Hjdemnq Dqopfx Ap Djnn Mach. No.: 70310010 . 400 x 250 mm. . With Electrical motor.

Condition: used, No. 10025 Cutting mill Alpine RO 40/63 Used According to our customer, the machine is fully functional and can be inspected on site Motor power 30 kW Rotor diameter 630 mm Rotor width 400 mm Rotor knives 5 rows with 3 knives each Stator knives 1 row with 3 knives to the front and 2 rows with 3 knives to the rear Maximum permissible speed of the drive shafts 560 rpm Hnedpfx Aoxph Avep Den The cutting mill Alpine RO 40/63 with patented cross-shear rotor guarantees optimum material distribution with maximum cutting performance. The hinged screen holder allows easy removal of the screen and perfect access for cleaning the machine and replacing the blades. Ideal for industries such as recycling (for blown film, cables, plastics, etc.) and food (tea, spices, dried vegetables, etc.). Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Hsdpfxjma Snxj Ap Djnn

Condition: ready for operation (used), functionality: fully functional, color: grey, Year of construction: 1988, Aeroplex fluidised bed counterjet mill 400 AFG Hedpfex T Ar Nsx Ap Denn The plant is fully functional and can be inspected on site. Trial milling can be carried out in advance depending on the material. In 2005, the plant was modernised and converted to load cells. Electrical control system: Simatic S7-300 The plant consists of the following units: 1. Mill 2. Raw material filling unit 3. Air filter 4. Electrical switchgear

Year of construction: 1980, condition: ready for operation (used), An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible. Hedpsyyy Nxefx Ap Djnn