Used Alfa Laval Separator for sale (93)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Separator: Manufacturer: GEA Westfalia Gtedsxap Arspfx Admot Type: MSD300 Year of manufacture: 1987 Capacity: 30,000 l/h Pasteurizer: Manufacturer: Tetra Pak / Alfa Laval Type: CLIP10-RM Year of manufacture: 1998, completely new plates in 2019 Capacity: 30,000 l/h Holding section with all valves, measuring instruments, and components without feed pump

Condition: used, Upright stainless steel container with hinged lid and side outlet pipe. Additional title: vertical stainless steel vessel Gtsdpfjw Tbwpjx Admot Gross volume: 1055 l Length: 1,30 m Width: 1,30 m Height: 1,40 m Material: stainless steel Position: vertical Features: hinged lid, side outlet

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, overall weight: 370 kg, pressure: 10 bar, operating pressure: 10 bar, temperature: 110 °C, power: 1,300 kW (1,767.51 HP), heating capacity: 1,300 kW (1,767.51 HP), Plate heat exchanger ALFA LAVAL M10 MFM 11.5lit 7.9nm2 1300kw ALFA LAVAL M10 MFM plate heat exchanger /ct2227/ Manufacturer: ALFA LAVAL M10 MFM Serial number: 30106-07882 Year of manufacture: 2007 Nominal power: ca:1300kw Heat transfer surface:7.8nm2 Width: 480mm Height: 1090mm Connection height: mm Width:800cm Pipe connection DN100 4x Capacity: Primary: 11.5Liter Secondary:11.5Liter Max pressure: 10bar Test pressure 13 bar Nominal temperature: 0-90 °C Weight: ca 340kg Gtodpsxppidjfx Admst

Condition: good (used), - Capacity : 2 x 4000 l/h - Inlet temperature : + 40°C - Outlet temperature: + 20°C - Cooling liquid temperature: approx. 7°C Gtodpfx Adoh Ath Rsmst - 2 plate compartments for cooling 2 products simultaneously and individually - With control for 2 independent circuits

Condition: excellent (used), functionality: fully functional, Milk Reception Station with Alfa Laval Manifold Equipped with Two Centrifugal Pumps Manufacturer: Alfa Laval Application: Milk reception section / product distribution manifold Complete milk reception station with Alfa Laval manifold, equipped with two centrifugal pumps and a stainless steel working platform with stairs. The system is designed for hygienic transport and distribution of milk or other food-grade liquids in dairy processing facilities. Main components of the installation: 1. Alfa Laval centrifugal pump, type: LKH-50 Serial number: 252968 Year of manufacture: 2020 Dimensions: 650 × 360 × 530 mm 2. Alfa Laval centrifugal pump, type: LKH PRIME 40 Serial number: 253012 Year of manufacture: 2020 Dimensions: 1000 × 500 × 600 mm This is a self-priming pump designed for CIP applications and for transferring liquids containing air. 3. Alfa Laval milk manifold with multiple valves Valve types: LKLA-T NC and Unique Gtedpfxjxtvhze Admet Overall dimensions: 6000 × 4320 × 1500 mm Includes: control cabinet, dimensions: 800 × 350 × 1250 mm The system allows fully automatic switching of product and CIP flows during milk reception and distribution processes. 4. Stainless steel working platform with stairs Working height: 1550 mm Overall dimensions: 2150 × 1000 × 2600 mm Facilitates operation of manifold valves and components The Alfa Laval Manifold Milk Reception Station is a modern and hygienic process solution equipped with: - two Alfa Laval centrifugal pumps (LKH and LKH PRIME), - valve manifold with LKLA-T NC and Unique valves, - service platform with stairs, and a control cabinet. The system is designed for precise management of product flow and CIP media in dairy and food processing installations.

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Gtsdet R Tr Sopfx Admst

Condition: used, functionality: fully functional, total height: 3,500 mm, tank capacity: 6,000 l, inner diameter: 2,000 mm, TECHNICAL SPECIFICATIONS - Open mixing tank with three-blade agitator on two levels - Brand: ALFA LAVAL - 12 shell-and-tube circuits in the middle of the shell - Vertical cylindrical shape on legs - Rectangular door at the bottom of the tank - Total drain valve - Connection at the bottom of the tank - Thermometer on the front - Volume: 60 HL (6,000 litres) - Sloped bottom DIMENSIONS - Diameter: 2000 mm - Height: 3500 mm ADDITIONAL INFORMATION - Tank for product density 1 - Conditions of use: atmospheric pressure - 6-month warranty - Manufactured in France - Europe Gsdpsw Uvhlofx Admstt - Complies with CE standards

Condition: used, functionality: fully functional, Compact Aseptic Filler (CAF) is an extremely versatile and robust filling system designed to fill a wide range of food and beverage products into suitable pouches under aseptic conditions. CAF filling units are widely used in the food and beverage industries. Such as: ready-to-drink juices, dense, low-acid food and beverage products (such as milk, milkshakes, sundaes, vegetable and meat extracts) and viscous products containing particles (such as concentrates, syrups and extracts from fruits, citrus and tomatoes). Gtjdpfswnqa Dex Admet The filler is designed with accessories suitable for filling bags from 3 to 20 liters. * The output may vary depending on the format and product to be filled.

Condition: as good as new (ex-display), Centrifugal pump Alfa-Laval FM-1A Material: stainless steel, medium: fruit concentrate/fruit juice, Gtedpfx Adohryyhomjt flow rate 20.000 l/h, delivery head approx. 25m, power approx. 3 kW, speed approx. 2.900 1/min, inlet/outlet DN50 1 VA-tank, vertical, cylindrical, closed 1 VA-subframe for pump and tank

Condition: used, - Flat bottom tank with 2% slope - Brand : ALFA LAVAL - Total capacity : 30200 liters - Material : 316 L stainless steel - Interior finish : Cold rolled - Exterior finish : Cold rolled - Temperature controlled ROOF - Conical - 1 off-center chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING Gsdpfxsw Ngqte Admjtt - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor BOTTOM - 2% sloped plate with drain - 1 total drain valve with plug DIMENSIONS - Diameter : 2800 mm - Total height : 6000 mm - Ferrule height : 4800 mm - Conical upper dome : 500 mm - Chimney : 300 mm

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Buttermilk Pasteurization Line Complete buttermilk pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with a buffer tank, circulation pumps, process valves, flowmeter, and control cabinet. The system is designed for hygienic thermal processing of buttermilk in dairy plants. Capacity: 25,000 liters/hour Main components of the line: 1. Siersma Scheffers Stainless Steel Buffer Tank Serial number: Karnemelk Year of manufacture: 1995 Capacity: 1,000 liters Overall dimensions: Ø 1100 × 3000 mm Material: stainless steel (s/s) 2. APV Valves (4 units) High-quality process valves for food applications Gsdpfx Ajxtvftedmstt 3. Pomac Centrifugal Pump, type: CP19555 / 165 x 10 Serial number: 20080 Year of manufacture: 2007 Capacity: 30 m³/h Power: 5.5 kW Dimensions: 700 × 350 × 450 mm 4. Endress + Hauser Flowmeter, model: Promag H / Promag 300 Dimensions: 350 × 200 × 200 mm Provides precise measurement of liquid food products 5. Samson Valve Dimensions: 560 × 300 × 300 mm Application: flow and pressure regulation in process systems 6. Alfa Laval / Tetra Pak Buttermilk Pasteurizer, type: C8-K8M Serial number: 30107-33855 Year of manufacture: 2012 Capacity: 559 liters Operating parameters: PS: 16.0 bar PT: 22.9 bar TS: 120 °C Dimensions: 3200 × 550 × 1850 mm High-performance heat exchanger system optimized for buttermilk processing 7. Hovap Centrifugal Pump, type: HP-5032/170 Serial number: 33740 Capacity: 35 m³/h Power: 7.5 kW Dimensions: 700 × 320 × 550 mm 8. IPBE Control Cabinet (s/s) Purpose: control and supervision of the buttermilk pasteurization line Dimensions: 620 × 230 × 770 mm The Alfa Laval / Tetra Pak buttermilk pasteurization line with a throughput of up to 25,000 l/h is a complete, integrated system for the thermal processing of dairy products. Use of components from Alfa Laval, Tetra Pak, Pomac, Hovap, Endress + Hauser, and APV ensures high reliability, durability, and process quality.

Condition: ready for operation (used), Power: 75kW, was used for milk products. Gtjdpsiwf Uusfx Admst

Condition: used, functionality: fully functional, total height: 3,500 mm, tank capacity: 17,800 l, inner diameter: 2,800 mm, TECHNICAL SPECIFICATIONS - Flat bottom tank with 2% slope - Brand: ALFA LAVAL - Total capacity: 17,800 litres - Material: 316 L - Interior finish: Cold rolled - Exterior finish: Cold-rolled ROOF - Conical - 1 off-centre chimney at the front Ø 200 mm - 1 thermometer - Lifting rings RING - 1 oval door 310×420 mm Gedpow Uqkbsfx Admott - 1 partial drain valve DN 65 - 1 level gauge with tap BOTTOM - 2% sloped base with drain - 1 full drain valve with plug DIMENSIONS - Diameter: 2800 mm - Ring height: 2800 mm - Total height: 3500 mm ADDITIONAL INFORMATION - 6-month warranty - Complies with CE standards

Condition: good (used), Year of construction: 2006, functionality: fully functional, cooling capacity: 945.4 kW (1,285.38 HP), type of cooling: air, overall weight: 2,600 kg, total width: 2,230 mm, total length: 8,190 mm, total height: 2,500 mm, warranty duration: 6 months, Dry-cooler ALFA LAVAL S.p.a. VDDS906CD196 945.4/779.4 KW Gtedpjw Sr R Defx Admet Cooling capacity: 945.4 / 779.4 kW / 268.8/221.6 tons (40/35 — +25C) Year of manufacture: 2006 Fluid: Glycol + Water Fluid flow: 164.4 / 135.5 m³/h Air flow: 251913 / 195147 m³/h Number of fans: 12 pcs. Fan Diameter: 910 mm Volume: 336.9 dm3 External surface: 3868.2 m2 Dimensions: 8.19 x 2.23 x 2.5 m. Weight: 2600 kg.

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) Godpfjg N Db Hox Admott 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Cream Pasteurization Line Alfa Laval / Tetra Pak Cream Pasteurization Line | Piston Pump, Buffer Tank, Flowmeter, Pasteurizer Complete cream pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with high-quality pumps, valves, flowmeters, and control cabinets. The line is designed for hygienic and efficient cream pasteurization in the dairy industry. Capacity: 35,000 liters/hour Main components of the line: 1. Circumferential Piston Pump Manufacturer: Alfa Laval Type: DURACIRC 73 Serial Number: E256143 Year of Manufacture: 2021 Dimensions: 1600 × 600 × 800 mm Included: various valves and stainless steel filter housing 2. Stainless Steel Buffer Tank Tank dimensions: Ø 1100 × 1700 mm Total dimensions: Ø 1200 × 2900 mm 3. Alfa Laval Valves, Type: Unique SSV (6 pcs.) High-quality single seat valves for food applications 4. Flowmeter Manufacturer: Endress + Hauser Model: Promag P / Promag P Dimensions: 200 × 200 × 350 mm High-precision flow measurement for food-grade liquids 5. Centrifugal Pump Manufacturer: LKM Type: LKH 20/155 Power: 5.5 kW Production Number: 20-02319 Dimensions: 700 × 380 × 400 mm Stainless steel construction, suitable for CIP operation 6. Valve Manufacturer: Armaturen AG Type: MA9.31A6 5S Po Dimensions: 600 × 400 × 400 mm 7. Cream Pasteurizer Manufacturer: Alfa Laval / Tetra Pak Type: C10-SH Serial Number: 30104-38526 Year of Manufacture: 2003 Capacity: 1311 liters Godpfxjxtu Ugj Admett Operating parameters: Operating pressure (PS): 0 / 20.0 bar Test pressure (PT): 28.6 bar Temperature range (TS): 0 / 130 °C Dimensions: 5000 × 800 × 2200 mm High-efficiency heat exchanger system ensuring stable pasteurization 8. Centrifugal Pump Manufacturer: Pomac Type: CP29068/230 X 15 Serial Number: 22 818 Year of Manufacture: 12/2011 Capacity: 45 m³/h Power: 15.0 kW Dimensions: 950 × 400 × 500 mm 9. Nocado Valves (5 pcs.) Process valves for food applications 10. Control Cabinets Manufacturer: Eldon and IPBE Dimensions: 400 × 230 × 770 mm 1000 × 300 × 1000 mm The Alfa Laval / Tetra Pak Cream Pasteurization Line is a complete industrial solution with a capacity of up to 35,000 l/h, designed for high hygiene, precise process parameter control, and maximum reliability. Ideal for dairies, cream and milk fat producers.

Condition: excellent (used), Year of construction: 2007, Used, draw through water/glycol cooler, brand Alfa-Laval type INR W S 6777D/Y. YOM: 2007, SN: 2190988. Max DN = 57 mm; Vn = 3҇230/400V, fluid group 2, coil TS 110/-40°C, F = 50 Hz, PT = 10 bar, PS = 9 bar, own weight: 604 kg. This, in very good condition draw through water/glycol cooler is equipped with: 2 pieces Ziehl Abegg ventilators 07078866, FC063-4DS6KV7, each Ø500, 1,19 kW, 1360/1000RPM; COSY 085, surface more than 90 m2, aluminium casing/aluminium fins Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol basis. Gjdpfxoucnzwo Admjtt Sales price: 2.960 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), functionality: fully functional, Alfa Laval Centrifuge (Whey Skimming) Godpfx Adow Dgaxsmjtt Used centrifuge for whey skimming Manufacturer: Alfa Laval Machine number: 31829-02912 Application: whey skimming Overall dimensions: 1700 mm (L) x 1850 mm (W) x 1830 mm (H)