Used Hebrock Akv 3005 Dk for sale (47)

Condition: good (used), Year of construction: 2016, Edge banding machine Manufacturer: Hebrock Todpfsz Hbqlox Aa Iec Type: AKV 3005 DK-F Year of manufacture: 2016 Total edge length processed: 88,570 m Edge thickness: 0.3 - 3 mm Workpiece thickness: 10 - 45 mm Feed rate: 10 m/min Total power consumption: 13.4 kW Overall length: 5,000 mm Gluing unit: Yes Trimming saw unit: Yes Radius flush trimming unit: Yes Corner copying unit: Yes Surface scraper blade: Yes Buffing unit: Yes

Condition: used, Year of construction: 2015, Plate feed direction: from operator to the left. Maximum edge band thickness: 3 mm. Minimum workpiece thickness: 8 mm. Maximum workpiece thickness: 60 mm. Minimum workpiece width: 80 mm. Minimum workpiece length: 190 mm. Feed rate: 10 m/min. Heat-up time: 5 min. Edge banding unit: Yes, with 2 milling units. Edge banding tool: Dia-changeable milling cutter. Diameter: 100 mm. Height: 44 mm. Adjustment of the infeed guide: manual. Trimming shear up to: 3 mm. Individual edge feeding: possible. Gluing: Glue contact roller. Miter saw: Yes. Combination unit for flush trimming/chamfering/rounding: pneumatically adjustable. Rounding unit: pneumatically adjustable. Profile drawing blade: pneumatically adjustable. Flat drawing blade: Yes, sensor-controlled. Unit display: on the display. Control type: PLC linear control. Operation: Touch screen. Motor power: 13.8 kW. Drive system: Yes. Extendable roller support: Yes. Protective cover: Yes. Weight approx.: 1550 kg. Extraction diameter: 80/140 mm. Dimensions: 5000 mm. Storage location: Tjdpfjzl Am Ijx Aa Ioc

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Tsdpfjxyiilox Aa Ioc Storage location: Nattheim

Condition: used, Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Voltage: 400 V Frequency: 50 Hz Current: 31.7 A Power: 12.3 kW Machine number: 3141 Year of manufacture: 2016 PLC control with touchscreen The asking price is 20,500 euros net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us. Tjdpfxoz Afctj Aa Iec

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Tsdpfxszizabe Aa Isc Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: ready for operation (used), Year of construction: 2005, Glue pot Edge application End-cutting units Flush trimming units Radius trimming units Scrapers Buffing units This machine is a compact edgebander for straight workpieces, featuring application rollers for hot-melt adhesive on the workpiece edges. The end-cutting unit—which uses a single saw blade to cut both the leading and trailing edges—and the roll cut-off mechanism are controlled electro-pneumatically. The high-frequency (HF) motors for the end-cutting, trimming, and corner-rounding units are powered by an electronic frequency converter. Todpsz Egkbefx Aa Ijc The pressure required to bond the edge material to the workpiece is generated by spring-loaded rollers in the machine table. TECHNICAL DATA Motor power: 2 x 2.2 kW Frequency: 200 Hz Speed: approx. 12,000 rpm Motor shaft: 30 mm diameter, 58 mm length, internal M16 (left-hand thread), internal M12 (right-hand thread) Max. tool dimensions: 100 x 48 mm Max. milling depth: 3 mm Extraction: 60 mm diameter Solid edge strip thickness: 5 mm Coil edge strip thickness: 2 mm Tool height: 40 mm Tool length: 200 mm Feed speed: approx. 10 m/min MACHINE DIMENSIONS Length including outrigger: 3,540 mm Depth including roller table: 1,325 mm Height: 1,520 mm Work table height: 880 mm Work table width with support rail retracted: 210 mm Work table width with support rail extended: 680 mm Weight: 880 kg

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Todpjx S Hmzefx Aa Ioc Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Tsdpfxezf Id Sj Aa Ijc The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Feed rate max.: 10 m/min Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel dividing/milling units: 1 Number of edge processing units: 4 Adhesive system: EVA hot melt adhesive The machine consists of the following processing units: Panel dividing/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Capping Number of motors: 1 Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Overpressure Pressure with idler rollers Panel support guides Edge roller magazine Adhesive pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8570

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Todpsw Nih Iefx Aa Isc Year of manufacture: 2007 Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: 3074, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total height: 1,618 mm, total length: 4,984 mm, total width: 1,425 mm, overall weight: 1,400 kg, year of last overhaul: 2025, Equipment: CE marking, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: Tjdpfx Aozhrdusa Ijc - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: good (used), Year of construction: 2005, Brand: Hebrock Tjdsq Ihxpspfx Aa Isc Model: AKV 88 D Machine no: 569-P3 Year model: 2005 Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Stock no: 2001921BXA

Condition: used, Year of construction: 1994, for pre-coated edges including a lot of edge material with outriggers on both sides end cap station 3-roller feed used, good condition Make Hebrock Type AKV-83 Year of construction 1994 Edge band thickness 1.0 mm Workpiece height max. 50 mm Workpiece width min. 50 mm Workpiece length min. 170 mm Space requirement approx. 1700 mm x 690 mm x 500 mm Storage location 97447 Gerolzhofen, freely loaded, unpacked Todpfxovwfzvj Aa Iec Handover in the current condition as seen, without guarantee and guarantee

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Todpfxou Racxs Aa Isc Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Condition: good (used), Year of construction: 2002, I sell the edge banding machine HEBROCK AKV088D, Year 2002. Suitable for curved shaped edges Good condition, possible to test ! Tedovx D Auepfx Aa Isc Possible to buy also the Radius milling machine HFF08.

Condition: used, Year of construction: 2013, machine/vehicle number: 2365, functionality: fully functional, power: 10.5 kW (14.28 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece width (max.): 2,500 mm, workpiece length (max.): 3,200 mm, height adjustment type: mechanical, feed rate X-axis: 10 m/min, actuation type: manual, total height: 1,650 mm, total length: 4,300 mm, total width: 1,500 mm, overall weight: 750 kg, year of last overhaul: 2021, Equipment: CE marking, documentation/manual, The machine has always been well-maintained, and even minor repairs were carried out by Santen & Marzeion from Heede when necessary. Over the past 4 years, the edge bander has been used very little. Due to the owner's retirement, the carpentry business is being closed down, and I would like to sell this reliable Hebrock machine. Tedpfx Aeznwyzja Ijc The model features 2 jointing cutters, an infeed belt, a squaring shear, a flush saw, a flush router, a rounding router, and saw blades. Questions are welcome.

Condition: good (used), Year of construction: 2002, overall weight: 600 kg, Equipment: CE marking, documentation/manual, For sale: a used Hebrock EURO 2000 edge banding machine. Equipment: +Cutting unit +Routing unit for radius and chamfer +Digitally controlled glue temperature +Automatic feed +Adjustable workpiece pressure +Extendable workpiece support +Control panel with separate selection of units +Operating manual and machine documentation available Technical data: +Year of manufacture: 2002 +Machine no.: 4868 +Connection power: 7.0 kW +Voltage: 230/400 V Tedpfxjz Hy A He Aa Iec +Frequency: 50 Hz +Current draw: 13.6 A Inspection and test run possible by prior arrangement. Invoice with VAT shown. Subject to prior sale and errors.

Condition: used, Year of construction: 2021, machine/vehicle number: K3999, functionality: fully functional, operating hours: 5,384 h, power: 14.6 kW (19.85 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 10 m/min, total height: 1,430 mm, total length: 5,250 mm, total width: 1,230 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Hebrock K36 AIRTRONIC edge banding machine – zero joint, 2021, low mileage We are selling a single-sided edge banding machine from Maschinenbau Hebrock GmbH (Hüllhorst, Germany), model K 36 with AIRTRONIC system, machine number K3999, year of manufacture 2021. The machine is currently in operation at our facility – fully functional and ready for immediate use. Zero joint – this is what sets this machine apart. The edge banding machine is equipped with an Airtronic hot air unit. Compressed air heated to 300–600 °C is directed through a nozzle directly onto the functional layer of the edge band, just before the pressing zone – the edge band fuses with the panel without a visible glue line. In practice, this means the ability to edge band acrylic, high-gloss, and lacquered fronts with quality comparable to laser technology, without investing hundreds of thousands of zlotys in a laser machine. This is the most expensive and rarest option in this class of edge banding machines – on the used market, there are literally only a few machines with a zero joint available across Europe. The machine can also operate in a conventional mode, using standard EVA and PUR hot melt adhesive. Mileage – documented by the machine’s counters: Operating hours: 5,384 mth Length of edge band applied: 619,339 m (619 km) Parameter Value Type K 36 Machine number K3999 Year of manufacture 2021 Voltage / frequency 400 V / 50 Hz Rated current 28.9 A Total power 14.6 kW Operating hours 5,384 mth Edge length 619,339 m Machine name Single-sided edge banding machine with Airtronic zero joint Machine number K3999 Functionality Fully functional Operating hours 5384 Live demonstration possible Weight / dimensions 1700 kg · 5250 × 1230 × 1430 mm Input current 28.9 A (rounded to 29) Tedpfezvu Ekex Aa Ioc Workpiece height 60 mm X-axis feed 10 m/min Edge thickness 3 mm PRICE 250,000 NET

Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (including touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (including DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir system including adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius trimming blade; flat trimming blade (including pneumatic feed); cleaning station; 1 free space for a 2nd milling station or a groove cutter (groove cutter only if the cleaning station is removed); robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, pull-out workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Min. workpiece length: 160 mm Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm 8 mm version K36, 1 unit, quick-change system for corner cutter Tsdpezvhk Hefx Aa Isc K36, 1 unit, surcharge for multi-radius trimming blade (R2/R1) K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spraying device, plate K36, 1 unit, cleaning agent spraying device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius trimming blade K36, 1 unit, pneumatic 3-point adjustment K36, 1 unit, Airtronic K36, 1 unit, extension of the infeed and outfeed support by 440 mm each, 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support area for improved workpiece handling by 450mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter 24.1 mm, 1 unit. Ball bearing for corner rounding cutter 24.2 mm, 1 unit. Packaging surcharge, 1 unit. Additional quick-change reservoir including level sensor. Manufacturer: Hebrock, Type: 36/14/1, Article No. H36/14/1, 1.00 unit. Additional changeover motor for corner cutter K36. Manufacturer: Hebrock, Type: 36/08/2, Article No. H36/08/2, 1.00 unit. R1 Storage location: Nattheim.

Condition: excellent (used), Year of construction: 2024, Hebrock adhesive basin / exchange basin For Hebrock K36 Tjdpfxsznnlho Aa Ijc Year of manufacture: 2024 Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: not inspected (used), Year of construction: 1995, functionality: limited functionality, HEBROCK Edge banding machine Euro 2000 Year of manufacture: 1995 Without jointing unit With undercarriage BRANDT Edge rounding machine FB 10 Year of manufacture: 1996 Both machines for €1,500.00 Tsdpfx Aszv Eh Nsa Isc

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, Hebrock EURO 2000 Edge Banding Machine – fully overhauled, ready for immediate use For sale is a highly reliable and robust edge banding machine manufactured in Germany. The machine has been technically refurbished and is immediately operational – ideal for joineries looking for a solid solution without investing in new equipment. Radius and chamfer adjustment pneumatic. The machine can be tested on site. Condition / Work carried out: Tsdpfxjy Nd H He Aa Iec - All pneumatic hoses replaced - 2 main cylinders new - Machine thoroughly cleaned - Technically inspected and ready for operation Technical specifications: - Manufacturer: Hebrock GmbH (Made in Germany) - Model: EURO 2000 - Year of manufacture: 2001 - Voltage: 230 / 400 V - Frequency: 50 Hz - Power: 7 kW - Rated current: 13.6 A Working range: - Workpiece thickness: approx. 10 – 50 mm - Edge thickness: approx. 0.5 – 3 mm - Minimum workpiece length: approx. 250 mm - Minimum workpiece width: approx. 70 mm - Feed speed: approx. 10 m/min - Compressed air connection required (approx. 6–7 bar) Delivery within a 150 km radius available for an additional charge. As we are currently receiving new machines and storage space is limited, we have adjusted the price.

Condition: excellent (used), Hebrock F5 Edge Bander Well-equipped, can be inspected before purchase. PRE-MILLING cutters, Glue application with a roller, Has a glue release mechanism, The glue pot is replaceable. A second glue pot is included. Pneumatic pre-trimming guillotine, Pressure rollers, Final trimming saw, Liquids Top and bottom milling unit, R1 – R2 Profiling cylinder Corner rounding unit Flat cylinder, Polishing unit Pneumatic 3-point adjustment Max. veneer thickness in roll: 3mm, Power consumption: 7.8 KW, Max. part thickness: 50mm Used machine, very good condition Tsdpfxeza Uq Ae Aa Ijc Mileage: 62,000 meters

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- Todeymyp Ropfx Aa Ioc - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper - Flat scraper blade - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Tjdozf Ircepfx Aa Isc Number of motors: 2 Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Condition: new, Hebrock F5 Altendorf edger well-equipped, can be inspected before purchase, Liquids: PRE-MILLING cutters, glue application with a roller, equipped with a glue discharge, the glue pot is replaceable, pneumatic pre-trimming guillotine, pressure rollers, final trimming saw, milling unit, top-bottom, R1 – R2 Pneumatic 3-point adjustment Todpfxsz Di Adj Aa Isc R1-R2 profile edger corner rounding unit flat edger, Polisher max. veneer thickness in roll: 3mm, feed rate: 10m/min, power consumption: 7.44KW, machine is new The catalog price for a new machine with this equipment is over 51,000 EUR.