Used Air Jet Dryer for sale (61)

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Gtjdpfxji Hckro Aalow Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: like new (used), DEMONSTRATION MACHINE Godsycc Tdspfx Aaletw For sale is an as-new JET belt and disc sander JSG-31A with a 300 mm disc diameter. The demonstration unit is in original condition, so you receive the full warranty. Technical specifications: - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm - Disc speed: 2,700 rpm - Disc sanding table size: 230 x 420 mm - Sanding table tilt range (disc): -45° to +15° - Belt dimensions: 150 x 1,220 mm - Belt speed: 11.5 m/sec - Belt sanding table size: 190 x 330 mm - Sanding table tilt range (belt): -45° to 0° - Sanding arm tilt range (belt): 0° to 90° - Extraction port: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping (by freight forwarder): Austria: € 70.00 incl. VAT Germany: € 90.00 incl. VAT South Tyrol: € 110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sanding machine, professional, workshop, stationary, machine Reference: R-A0117

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Gjdpfx Aasnab Sieljtw Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Gedpfonab Rlex Aalstw We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET Oscillating Edge Sander OES-80CS featuring a 400V motor / 2,800 watts and a belt speed of 17 m/s. The demonstration machine is in its original condition, so you receive the full warranty. Technical Data - Motor: 400 V / 2,800 watts - Belt speed: 17 m/s - Belt dimensions: 150 x 2,260 mm - Belt inclination: 90° – 180° Gtsdjyb Sfaspfx Aalow - Belt table dimensions: 810 x 180 mm - Extension table: 250 x 300 mm - Oscillation stroke: 13 mm - Oscillations per minute: 108 - Extraction port diameter: 100 mm - Dimensions: 1,300 x 670 x 1,230 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70.00 incl. VAT Germany: €90.00 incl. VAT South Tyrol: €110.00 incl. VAT Related terms: JET OES-80CS, edge sander, oscillating, woodworking, 400V, machine, belt sanding technology, workshop equipment, industrial quality, 150x2260, belt Reference: R-A0117

Condition: like new (used), DISPLAY MODEL Gjdpfx Aoyb Sbnoaletw For sale is an as-new JET Mortising Machine 719-AS equipped with a powerful motor for demanding applications. The display model is in its original condition, so you benefit from the full warranty. Technical specifications - Motor: 230 V / 1,300 W - Spindle speed: 1,450 rpm - Max. chisel size (hard/softwood): 19 x 19 / 25 x 25 mm - Keyless drill chuck: 13 mm - Max. workpiece height: 195 mm - Max. chisel stroke: 200 mm - Table travel (longitudinal/cross): 400 / 100 mm - Table tilt: 0 – 35° - Table dimensions: 520 x 180 mm - Workpiece stop: 520 x 90 mm - Max. distance from chisel center to stop: 100 mm - Machine dimensions: 650 x 500 x 1760 mm - Weight: 125 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarder: Austria: €75.00 incl. VAT Germany: €95.00 incl. VAT South Tyrol: €125.00 incl. VAT Related terms: JET 719-AS, mortising machine, slot mortising, wood jointing, 230 V drive, 1300W power, professional tool, workshop equipment, precision engineering, woodworking Reference: R-A0117

Condition: good (used), BACCI DOUBLE JET The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. Godsxr Dduopfx Aaljtw This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required.

Condition: good (used), BACCI DOUBLE JET Gsdpfx Aaoxr Dcwsletw The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required.

Condition: new, Equipment: rotational speed of tool magazine infinitely variable, Heavy grey cast iron machine bed for optimal smooth running and stability when working with unbalanced workpieces Headstock can be moved along the entire machine bed, rotatable by 360° with detents at 0, 30, 60, 90, 135, 180, and 270 degrees Variomatic speed control, infinitely adjustable from 280 to 2500 rpm via rotary knob at the end of the headstock Integrated spindle indexing device 36 x 10° Spindle lock at the front of the headstock for easy changing of workholding fixtures Double wedge clamp for tool rest and extension arm, particularly slip-resistant and efficient Gjdpfsw A Rqfex Aalotw Tailstock with robust trapezoidal thread, 108 mm quill travel with scale, 9 mm through hole

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit. Gtodpfx Aajyg Ea Ujlew

Condition: good (used), functionality: fully functional, For sale: Cold Jet RDS 1000 dry ice blasting machine without hose and nozzle. Operating hours: 238 hours. Weight with castors: approximately 800–1000 kg. Gtodpfx Aaeynuvbjljw

Condition: good (used), functionality: fully functional, ICETECH KG 12 Dry Ice Blasting Machine COLDJET with accessories Nozzles Glass beads Automotive industry - Fully functional Godoynuuwjpfx Aaljtw - Multiple nozzles included in the price - Pressure hose included in the price - Manual available

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), The CE100 series is an electrically driven high pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Gtodpfxohga N To Aalew Weight: 2000 kg Standard accessories included.

Condition: used, Year of construction: 2008, functionality: fully functional, grinding width: 635 mm, grinding height: 133 mm, – Year of manufacture: 2008 TECHNICAL SPECIFICATIONS: Gjdpfx Aasw Ip Husletw – Rated power: 5550 W – Actual power: 3700 W = 3.7 kW – Max. sanding width: 635 mm – Max. workpiece thickness: 133 mm – Min. workpiece thickness: 0.8 mm – Min. workpiece length: 230 mm – Sanding rollers: 2 x ø 152 x 635 mm – Height adjustment for the second roller – Speed: 1400 rpm – Sanding belt width: 600 mm – Two feed rates – Machine dimensions (L/W/H): 110 / 110 / 110 cm – Weight: 332 kg

Condition: ready for operation (used), Year of construction: 2008, Table size: 220 x 820 mm Table size (front table): 250 x 350 mm Grinding wheel dimensions: 150 x 2260 mm Grinding belt speed: 16 m/s Drive motor: 400 V, 1.5 kW Weight: 164 kg Space required: 1200 x 600 x 1250 mm Gjdpfsv Efn Ssx Aaletw

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Gsdpfxjxufbte Aalstw Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE125 series is an electrically driven high pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. Gtedehga Rxjpfx Aalew CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 90 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. Gsdpfxshga S Do Aalstw General specifications: ----- Drive motor power: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD700 can easily handle cleaning applications with high flow and pressure requirements. The pump is powered by a 6-cylinder Volvo diesel engine. There are two variants of the engine with an exhaust system according to EU Stage V / US EPA Tier 4 final or with an exhaust system according to EU Stage 2 / US EPA Tier 2. The Stage V solution is a pure SCR exhaust system. The frame is manufactured to be corrosion-resistant and is primed and painted for an attractive appearance. The frame is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully built-in solution in a trailer or container. The CD700 can be equipped with a manual gearbox, which allows the pump to be operated in several flow ranges and even manual operation in the lowest gear is possible. Similar but no Falch, Hammelmann, Kamat, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD700-1000 1000 bar 261 Lpm General specifications: ----- Max. Pump speed: 522 rpm Gedehgblkspfx Aaljtw Drive engine: 6 cyl. Volvo Diesel EU Stage V or EU Stage II Power of the drive motor: 522 kW Drive engine speed: 1800 rpm Diesel tank: 800 L Max. Fuel consumption: 90 L/h Dimensions and weight on base frame: 3100mm x 1700mm x 2300 mm (5850 kg)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE40 belongs to the series of our high pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and surrounding side frames made of stainless steel. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eye facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General specifications: ----- Drive motor power: 30 kW (50Hz) / 33 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A (60Hz) Dimensions: 1600 mm x 1050 mm x 1150 mm Gjdpfehga Irox Aalotw Weight: 650 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The machines of the CD25 series are compact high pressure cleaners from 170 to 500 bar and a volume flow from 17 to 42 l/min. The pump is driven by a 3-cylinder, water-cooled Kubota diesel engine. The robust frame is made of stainless steel for durability and corrosion resistance. The powder coating provides for a very nice appearance. The machine has very compact dimensions of 1200mm x 800mm. This is the same size as the well-known EURO pallet. The frame stands firmly on 4 large rubber feet. The high pressure machine is also equipped with forklift pockets and a central lifting eye. This makes it very easy to transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD25-170 170 bar 42 Lpm CD25-250 250 bar 32 Lpm Gtodpfxshgbfhe Aaljw CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500 bar 17 Lpm General Specifications: ----- Max. Pump speed: 1750 rpm Drive engine: Kubota Diesel 3 cyl. Water cooled Power of drive motor: 18.6 kW Drive motor speed: 3000 rpm Tank: 28 L Max. Fuel consumption: 5.7 L/h Loudness (7m): 80 dBa Dimensions and weight: 1200mm x 800mm x 1300 mm (350 kg) Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CDT50 in the trailer version covers a pressure of 230 to 2000 bar with a volume flow of 11 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in trailer version can be configured with numerous options such as hot water boiler, electrically operated hose reel, remote control etc. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- Model Pressure Flow rate CDT50-230 230 bar 80 Lpm CDT50-400 400 bar 40 Lpm CDT50-500 500 bar 33 Lpm CDT50-700 700 bar 25 Lpm CDT50-1000 1000 bar 20 Lpm CDT50-1250 1250 bar 15 Lpm CDT50-1380 1380 bar 13 Lpm CDT50-2000 2000 bar 11 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Gjdshgbkfjpfx Aaletw Drive engine: Toyota Diesel 4 Cyl. water cooled Drive motor power: 37.3 kW Drive motor speed: 1900 rpm Tank capacity: 90 L Max. Fuel consumption: 11.0 L/h Loudness (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers pressures from 200 to 2,800 bar and flow rates from 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is constructed from hot-dip galvanized steel, ensuring long durability and corrosion resistance. For an attractive appearance, the frame is primed and then painted. The machine’s dimensions are 2,250 x 950 mm. The frame is equipped at all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side bracket for protection and storage, for example for high-pressure hoses. Comparable but not the same as Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 Lpm CD200-250 250 bar 250 Lpm CD200-1000 1000 bar 63 Lpm CD200-1380 1380 bar 42 Lpm CD200-2500 2500 bar 25 Lpm CD200-2800 2800 bar 23 Lpm OPTIONAL: TRAILER VERSION CDT200 Gjdpohgbhnjfx Aaletw General specifications: ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optionally without AdBlue) Drive engine power: 149.1 kW Drive engine speed: 1,950 rpm Tank: 135 L for skid version, 200 L for trailer version Max. fuel consumption: 18-20 L/h Dimensions and unladen weight SKID: 2,170 mm x 1,350 mm x 1,810 mm (1,785 kg) Dimensions and unladen weight TRAILER: 3,800 mm x 1,900 mm x 2,000 mm (2,500 kg) Includes standard accessories.

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), The CD50 series of our high pressure machines covers a pressure from 230 to 2000 bar and a volume flow from 7 to 74 l/min. The pump is driven by a 4-cylinder water-cooled Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure long life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. There are 4 rubber feet mounted under the frame. The machine is also equipped with forklift pockets and lifting eyes at all four corners. For protection and storage of, for example, high-pressure hoses, a galvanized roof plate is provided. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 1000 bar 20 Lpm CD50-1250 1250 bar 15 Lpm CD50-1380 1380 bar 13 Lpm CD50-2000 2000 bar 10 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 cyl. Water cooled Power of drive motor: 37.3 kW Drive engine speed: 1800 rpm Tank capacity: 90 L Max. Fuel consumption: 10.0 L/h Loudness (7m): 80 dBa Gtjdpfohgbf Ejx Aalew Dimensions and weight: 1550mm x 920mm x 1250 mm (725 kg). Standard accessories included.

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), The CD100 series of water and water jet machines range from 250 to 2050 bar with pump flows from 21 to 167 l / min. The pump is driven by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel for long life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are fitted with rubber feet under all four corners and the machine has forklift pockets and suspension eyes at all four corners. The machines have galvanized roof panels with side railings for protection and storage of, for example, high pressure hoses. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1000 bar 42 Lpm CD100-1400 1400 bar 30 Lpm CD100-2050 2050 bar 21 Lpm General specifications: ----- Max. Pump speed: 750 rpm Drive engine: 4 Cyl. Sisu Turbo Diesel water cooled Drive motor power: 74.6 kW Drive motor speed: 1800 rpm Tank capacity: 140 L Gtsdpfx Aaohgbgqolsw Max. Fuel consumption: 16.0 L/h Loudness (1m): 84 dBa Dimensions and weight: 2250mm x 950mm x 1300 mm (2000 kg) Standard accessories included.