ABUS 5-ton crane, 21,100 mm span.

Abus 5 ton overhead crane. Span: 21.100 mm.

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Fedpfx Aeig T Ameb Ajgg Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: excellent (used), Year of construction: 2011, Technical data: Two-column design Cutting capacity: 700 x 520 mm Fodpfx Ajxlcpveb Aogg Cutting diameter (round steel): max. 520 mm Cutting diameter (square steel): max. 520 x 520 mm Cutting diameter (rectangular steel): max. 520 x 520 mm CNC control: B&R PP 45 Hydraulic bundle clamping Hydraulic lowering Infinitely variable saw band speed Mobile control panel with digital display Saw blade dimensions: 6640 x 41 x 1.3 mm Cutting speed: 15 - 90 m/min Working height: 770 mm Motor power: 5.5 kW Dimensions (L x W x H): approx. 3500 x 3000 x 2500 mm Weight: approx. 5.0 t Accessories: 4 new saw blades Condition: Almost as-new condition The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Fgodpjwmqwysfx Ab Aeg

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Fgodjx N Iclspfx Ab Aog Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. Fgedpfsxmvnusx Ab Asg 3 Spindles. Automatic Tool Changer. Scribing. Short Piece Removal. Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: used, Year of construction: 2013, functionality: fully functional, HD-X 918 – HBP 410/923G: complete, state-of-the-art, CNC-controlled system for efficient and rapid fabrication by drilling and sawing of almost all types of structural sections and flat bars. Fsdpjw Hf T Njfx Ab Asgg

Year of construction: 2000, condition: good (used), maximum load weight: 5,400 kg, bar diameter (max.): 40 mm, wall thickness: 50 mm, machine/vehicle number: 26130, CNC Controlled Axis: 'X' Axis Travel 0-18,000mm; 'Y' Axis (R.Hand Horizontal Drill Head) 10-450mm; 'Z' Axis (L.Hand Horizontal Drill Head) 10-450mm; 'V' Axis Travel (Vertical Drill Head) 20-895mm; 'R' Axis Travel (Saw Mitering) + 45 Degree to -60 Degree; 'S' Axis (Sawing Stroke) 0-450mm; Maximum Position Speed: 'X' Axis 50 Metre/ Minute; Fgodpfx Absqcu Euj Aog 'Z' Axis 10 Metre/Minute; 'V' Axis 10 Metre/Minute; Hydraulic Power Packs to suit both machines; Electrical Control Enclosure for Power Electric Equipment, Central Gears for Drive Units & Electronic Equipment; Drill & Saw Line regularly serviced; Drawings of electrical circuits, controls and Manuals available; Service & repair reports all available on request. Weight of Drill Approx 6,000kg; Weight of Saw Approx 3,700kg; Bandsaw Blade size: 7400mm x 41mm wide; Weight of Electrical Cabinet Approx 700kg; Weight of Pincher with Carriage Guide Approx 800kg; The client may offer help to dismantle and remove the equipment. The footprint of the complete line is around 40 metres including the conveyor feed belt.

Condition: good (used), machine/vehicle number: 550C08, A used PEDDINGHAUS punching machine with a large stroke and a large support table with stops. Punching force: 45 tons. Stroke rate: 40 strokes/min. Stroke: 762 mm. Working height: 1110 mm. Fgedjd Hxrtopfx Ab Aog

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Fgodpfx Abex Ruudo Aog Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Year of construction: 2019, condition: ready for operation (used), overall weight: 1,800 kg, total height: 2,160 mm, This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine. Additional information • Operating mode: Automatic • Mitre cutting range: 0° – 60° • Drive: 3 kW, 3x400V, 50 Hz • Saw band size: 4780 x 34 x 1.1 mm • Material loading height: 770 mm • Shortest length of rest: 220 mm • One upstroke: 750 mm • Maximum weight of material: 2500 kg Fgjdpsx D Iwpefx Ab Asg • Saw band speed: 20 – 120 m/min • Disconnected, currently cannot be operated, but was fully operational prior to factory relocation. • The seller can dismantle and load the machine for transport. • Not the main company bandsaw due to bulky size relative to material processed. Dimensions Machine Depth 3350 mm