Used Abort Gate for sale (591)

Condition: excellent (used), Year of construction: 2021, Ref:11155 . 2021 Horizon Stitchliner Mark III Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 30 station (1 x VAC 1000Ha + 2 x VAC 1000Hm) 10 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt. Specification: Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Blodpfx Ajz Hz Evsfmop Min: 120 × 85mm Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Condition: used, mileage: 243,000 km, Year of construction: 2021, Four-axle 8x4 truck, classified as construction equipment, equipped with a rear tipping body made by Comes, with a floor thickness of 7mm and side wall thickness of 5mm; the rear side has a double opening, including a drop-down gate. It features an electric Marcolin cover/uncover system, a manual gearbox, and is towable. It complies with Euro 6 emission standards. Please note that the vehicle description is indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the accuracy of the data. Bljdpe Ahrmgofx Afmsp

Condition: used, maximum load weight: 27,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2011, loading space length: 12,600 mm, loading space width: 2,480 mm, loading space height: 3,700 mm, loading space volume: 82 m³, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2011, Equipment: ABS, REISCH 82 m³ sliding floor semi-trailer with grain hopper Bjdpfxo Ahp U Ho Afmslp * FLOOR: VERY GOOD CONDITION! * Body: Full aluminum * Frame: Steel * 82 m³ volume * 3 x BPW ECO Plus axles * Air suspension * Lift axle * Lifting/lowering system * Disc brakes * Platform * Grain hopper and slide gate at the rear * Roller tarp * Aluminum sliding wall * Hydraulic locking system * WABCO - Smartboard * ABS * ALCOA rims * Tires: 385/65 R 22.5 * GVWR: 35,000 kg * Tare weight: 7,700 kg! * Overall length: 14,050 mm * Internal dimensions (including grain hopper): 12,600 x 2,470 x 2,510 mm - German semi-trailer! - First owner! - TÜV / MOT: new! Subject to errors and prior sale!

Condition: used, empty load weight: 6,300 kg, overall weight: 33,500 kg, axle configuration: 3 axles, first registration: 06/2001, loading space volume: 53 m³, suspension: air, tire size: 385/65 R22.5, tire condition: 80 %, trailer brake: trailer braked, Year of construction: 2001, Equipment: ABS, SCHWARZMÜLLER – approx. 53 m³ – Full Aluminum Bsdjztl Spepfx Afmjlp - Volume: approx. 53 m³ - Portal doors and grain discharge gates - Aluminum chassis - Aluminum body - ABS - SAF axles - Lift axle - Drum brakes - Air suspension - Roller cover - Standing platform at the front wall - Aluminum rims - Toolbox - Spare wheel holder - Spare wheel - Tire size: 385/65 R22.5 Tire tread: approx. 70-90% - etc. ….. For more information: Mobile phone: +43 664 4477030 ..:: Please contact us before your visit; the office is not always staffed ::.. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We will handle all customs matters for you. What to do with the used vehicle? ...If we reach an agreement, we will gladly take it in part exchange. This offer is non-binding and subject to change. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, year of last overhaul: 2023, punching force: 300 t, We offer a choice of two identical 2006 machines. 2006 IBERICA 105 SPEED Max sheet size : 750 x1050mm, Min Sheet size : 350 x 400mm, Blodpfxoqzhr Dj Afmjp Max mechanical speed : 9000 sph, Max impression strength : 300 tons. Max Carton board : 1.5mm, Mini Paper : 90/ 100 gm2, Max Corrugated board : 3mm, Direct Pallet loading Non stop feeder, Full complement of infeed table furniture, Left hand side pull register lay with sensor, Touch screen, Double action stripping, Automatic Non stop delivery with belt and programmable counter, Centre line, Quicklock on chase and stripping, Micrometric thin plate system, Elevated, Complement of stripping equipment PRICE: £110,000 Ex works for either

Condition: used, Year of construction: 1988, CRANE HALL with ADDITION 492 m² + 288 m² with 2 x 10-ton crane runways *for DIY enthusiasts* DEMAG, year of construction 1988 Crane hall (all dimensions are approximate) Width: 13.50 m Length: 36.50 m Eaves height: 8.89 m Ridge height: 9.25 m Roof slope: 3.05° Snow load at previous location: approx. 85 kg/m² Crane runways: 2 pieces Crane runway 1: 10 tons Cantilever at a height of: 8.85 m, the same for both cranes Hook height at 7.00 m, the same for both cranes Serial No. 1: Serial No. 88205500 Type FKKF, year of construction 1988 Drive motor 1 Crane runway 2: 10 tons Serial No. 2: Serial No. 88205510 Type FKKF, year of construction 1988 Drive motor 2 Addition Width: approx. 12.00 m Length: approx. 24.00 m Height: approx. 5.60 - 6.00 m Crane runway support provided for approx. 2.5 - 4 tons Equipment Supports: HEA 400, 14 pieces, 9.80 m, 17,150 kg incl. struts to truss, approx. 1.40 m Truss: IPE 400, 7 pieces, 10.70 m, 4,966 kg Gable wall supports Wall posts: IPE 140, 32 pieces, 6.00 m, 2,478 kg Pressure tubes roof: DN 80, 14 pieces, 6.00 m, 528 kg Gable wall supports Bsdpfx Afez Hlx Homelp Wind bracing in 3rd bay, 10 mm, 10 pieces, 6.23 m, approx. 23 kg Crane runway rails: 2 x 36 m 1 gable frame Supports: IPE 360, 3-4 pieces Pressure tubes: 90 mm, 11 pieces Corner supports: HEA 300, 3 pieces, 5.60 m The supports were cut off, 1 support was tapered, approx. 60 were embedded in concrete. Roofing: none Wall panels: none Windows: none Doors: none Gates: none Power cable crane runway: none Structural calculations / plans: none Lighting: none Crane runway drive, addition: none

Condition: new, functionality: fully functional, New, fully functional Leybold/VAT Leycon HV gate valve with bellows 6528450 for sale from old stock, with a 6-month warranty. Worldwide shipping available – request a quote! Bjdpfx Aoyrr Shjfmslp If you are looking for a vacuum pump, accessories, or any vacuum technology-related equipment, please contact us. We are happy to assist you with purchasing, technical advice, or developing custom solutions.

Year of construction: 2004, condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, diaphragm valve, diaphragm shut-off valve, double three-way shut-off valve Bedpfoiqu R Ijx Afmelp -Manufacturer: Wehlan, Double three-way shut-off valve -Type: 33 R 010 A 02 Order No.: 13992 -Connection: DN32 PN16 -Hole spacing: 350 mm -Number: 12x valves available -Price: per piece -Overall dimensions: 490/140/H370 mm -Weight: 14.3 kg/pc.

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 7,150 mm, construction height: 2,920 mm, operating hours: 204 h, fuel type: electric, mast type: triplex, Manufacturer + model: STILL EK-X 24 Mast: 3F7150 ID: 26112.5012 Category: Used Mast: 3F Lowered height: 2920 mm Lifting height: 7150 mm Capacity: 1000 kg Platform height: 6600 mm Picking height: 8200 mm Initialized: Yes Year: 2017 Bodpfx Asz Tdzbefmelp Hours: 204 hours Capacity: 24V / 1240Ah Options: FULL options!! - Triplex mast - FFL - Adjustable forks!! - Special SAFETY gates!! - Side guide / Rail guidance - (including end-of-travel braking under the battery) Truck width = 1480 mm Cabin width = 1400 mm Complete, LIKE NEW!!

Condition: good (used), The Esterer SS45 complete gate saw has undergone a complete technical overhaul. Only the appearance of the gate is no longer in optimal condition. Passage width: 45 cm Speed: 340 rpm Stroke: 500 mm Includes complete mounting, saw blades, and templates Features hydraulic blade lifting Includes a splitting wedge Drive power: 30 kW Includes hydraulic unit Includes complete control cabinet Bljdpfsfvb Etjx Afmep Please also check my other listings. I look forward to your inquiry.

Condition: new, For sale: GEFA butterfly valve, DN200, with Proval actuator. Bsdpfx Ajz Sk Nwefmjlp - NEW. - PRICE INDICATED IS PER UNIT.

Condition: like new (used), Year of construction: 2021, load capacity: 1,000 kg, lifting height: 5,350 mm, construction height: 2,900 mm, operating hours: 498 h, fuel type: electric, mast type: duplex, Manufacturer + model: STILL EK-X 10 Mast: 2W5350 ID: 26092.2114 Category: Demo Mast: 2W Lowered height: 2900 mm Lifting height: 5350 mm Capacity: 1000 kg Platform height: 4750 mm Initialized: Yes Cabin width: 1200 mm Year: 2021 Hours: 498 hours Capacity: 24v / 620ah Options: FULL options!! - DOUBLE steering!!!! Bsdpozv Rrysfx Afmolp - Special SAFETY gates!! - Adjustable forks! - 2 x Blue spot Complete, LIKE NEW!!

Condition: used, Year of construction: 2022, Automatic mortising machine with 3 heads ideal for mortising of doors, gates, gate posts, general joinery Worktable dimensions 3000 x 300mm Cast iron construction to give maximum rigidity 3 x vertical hydraulic work piece clamps 3 x horizontal hydraulic work piece clamps Speed movement is adjustable through hydraulics Automatic operation 3 x Mortising heads each : Manually positioned in X axis with mechanical locks Mechanical siko readouts for height position - Z axis Bsdpjzd Uy Rsfx Afmslp Double eccentric operation of the heads (patented design) Each mortise head Motor HP3 RPM 2800mm Max distance between 2 x outside mortising heads 2800mm Min distance between 2 x outside heads 180mm - centre to centre of mortise. Dust extraction outlets 100mm Hydraulic pump motor 10hp Serial nr - 127-22 Year - 2022 CE

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Blodpjywx Hqefx Afmsp Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 -Solenoid valve: type 644.0044.01 Bljdpsppdh Defx Afmop -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm -Dimensions: 415/340/H440 mm -Weight: 25kg

Condition: ready for operation (used), gate fold attachment Bedpsir A I Rofx Afmjlp

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, HUNING screw conveyors – 2 vertical and 2 horizontal conveyors with 3 pneumatic slide gates For sale are four used HUNING screw conveyors for biomass conveying, as well as three pneumatic slide gates. The conveyors feature shaftless screws, stainless steel tubes, and wear-resistant linings made of RCH 1000. Vertical conveyor HUNING SPV 300 – approx. 6 m • Base length approx. 5 m with approx. 1 m extension • Vertical conveying, conveying angle 90° • Drive power approx. 7.5 kW Vertical conveyor HUNING SPV 300 – approx. 8 m • Base length approx. 5 m with approx. 3 m extension • Vertical conveying, conveying angle 90° • Drive power approx. 7.5 kW Horizontal conveyor HUNING SPF 300 – approx. 7 m • Base length approx. 5 m with approx. 2 m extension • Horizontal conveying in tubular design • Drive power approx. 3 kW Horizontal conveyor HUNING SPF 300 – approx. 8 m • Base length approx. 5 m with approx. 3 m extension • Horizontal conveying in tubular design • Drive power approx. 3 kW Additionally included: 3 pneumatic slide gates Package price: €27,000 net Location: Diekirch, Luxembourg. Inspection possible by arrangement. Technical specifications according to the original manufacturer's documentation. The stated overall lengths are calculated from the base lengths and the added extensions. All measurements are approximate and can be verified on-site. Collection from the location. Dismantling, loading, and transport are the responsibility of the buyer. Bedpfx Afoz Infxomelp

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 6,150 mm, construction height: 2,830 mm, operating hours: 677 h, fuel type: electric, mast type: triplex, Manufacturer + model: STILL EK-X 48 Mast: 3F6300 ID: 25043.7302 Category: Demo Bsdpfx Ajzv Rwvsfmolp Mast: 3F Lowered height: 2830 mm Lifting height: 6150 mm Capacity: 1000 kg Platform height: 6300 mm Picking height: 7900 mm Cabin width: 1200 mm Year: 2018 Hours: 677 hours Capacity: 48 V / 620 Ah Options: Very unique!! - Electrically adjustable dashboard - Through-loading platform for use with EURO pallets - Original STILL safety gates (with safety features!!) - 2 x Blue spot lights!!

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Bledpfxszzz Nao Afmep Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, EFCO Glass Tempering Plant 750 °C Thermal glass tempering plant for the production of single-pane safety glass / tempered glass For sale is a professional, industrial glass tempering plant from the renowned British manufacturer EFCO Furnaces Ltd. The plant is ideally suited for the thermal tempering of flat glass for the production of single-pane safety glass (tempered glass). System components & design Oven inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the closed heating chamber (oven). Cooling system / fans: Powerful radial fans (blowers). These are essential for the thermal tempering process, in which the heated glass is rapidly cooled with air ("quenched") to create the necessary surface tension. Outlet & quenching area: A precise roller conveyor with ceramic or special rollers, on which the glass is held flat and transported during the cooling process. Control & electronics: A central main switch cabinet with PC visualization for monitoring the temperature zones, as well as separate operator terminals with analog pressure and temperature displays (e.g., for the air pressure of the fans). Technical data: Manufacturer: EFCO Furnaces Ltd. Type: Glass Temperer Maximum temperature: 750 °C Rated power: 220 kW Heating zones: 10 separately controllable zones (for precise temperature profiles) Voltage: 380 V / 3 phases Maximum glass size: 1,200 × 2,400 mm Glass thicknesses: 3–19 mm Overall length: 16,800 mm Overall width: 2,800 mm Overall height: 2,250 mm Year of manufacture: 2001 Conformity marking: CE-certified Dimensions (L x W x H): 16.80 m x 2.80 m (width up to fan connection) x 2.25 m For clear float glass, heating times of approximately 40–50 seconds per millimeter of glass thickness can be assumed. Estimated production capacity Glass thickness Heating time Calculated batches/h* 3 mm 120–150 sec. 24–30 4 mm 160–200 sec. 18–22 5 mm 200–250 sec. 14–18 6 mm 240–300 sec. 12–15 *Theoretical upper limit based solely on the heating time. Blsdoz Hm Ipepfx Afmjp Transport, quenching, and cooling times can reduce the throughput. Production area With the specified maximum glass size of 1,200 × 2,400 mm, the area is 2.88 m² per fully loaded batch. The actually usable area may be smaller. Complete set of replacement ceramic rollers: A full, unused/new set of high-quality transport rollers (fused silica rollers) with a new value of over €10,000 for the oven area. "One-stop shop: We would be happy to offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1994, Ref: 11166 . 1994 Jagenberg 78-1 Carton Gluer Suitable carton styles:      •     Straight-line cartons      •     Lock-bottom cartons Feeder Section      •     6 × 25 mm feeder belts      •     Feeder vibrator / jogger motor      •     2 adjustable main feeder gates      •     Nip rollers Pre-Fold Section      •     2 carriers positioned throughout the pre-fold section      •     1st and 3rd crease line pre-fold facilities Gluing Systems Bodpj Afhirofx Afmolp      •      HHS electronic cold glue system with 3 Guns      •     Bottom glue pot with 3 mm glue disc Folding Section      •     2 carriers with central steel support for larger blanks Transfer / Trombone Station      •     Fitted with 2 adjustable carriers      •     Original Jagenberg counter and marker device Delivery Conveyor Total length: 4.3 m      •     2.5 m top compression section with adjustable lever pressure      •     Flow control stacker drive Total Machine Length 10.5 Meters

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 5,350 mm, construction height: 2,900 mm, operating hours: 1,660 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V 10 / Mast: 2W5350 ID: 26083.71 Category: Used Mast: 2W Lowered height: 2900 mm Lifting height: 5350 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Initial inspection: Yes Cabin width: 1200 mm Year: 20 Hours: 1660 hours Battery: 24v / 930ah - Year 2022 Options: FULL options!! - DOUBLE steering!!!! - Special SAFETY gates!! - Adjustable forks! Bodezv Rvrjpfx Afmslp - 2 x Blue spot lights

Condition: like new (used), Year of construction: 2022, load capacity: 1,000 kg, lifting height: 5,350 mm, construction height: 2,900 mm, operating hours: 1,033 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V 10 / Mast: 2W5350 ID: 26083.5198 Category: Demo Mast: 2W Lowered height: 2900 mm Lifting height: 5350 mm Capacity: 1000 kg Platform height: 4750 mm Initialized: Yes Cabin width: 1200 mm Year: 2022 Hours: 1033 hours Capacity: 24V / 930Ah Options: FULL options!! Blodpszv Rrtofx Afmop - DOUBLE steering!!!! - Special SAFETY gates!! - Adjustable forks! - 2 x Blue spot lights

Condition: refurbished (used), Leybold E250 in very good condition. 1 year warranty. Optional, with oil filter: €8,950. Bodpoiyy Dzsfx Afmslp

Condition: good (used), machine/vehicle number: Machine No.: 2 6108 031, WAFIOS R 31 Wire Straightening and Cutting Machine | Decoiler | Omron Control | Tooling | Complete Production Cell Complete Wire Straightening and Cutting System WAFIOS R 31 wire straightening and cutting machine | Wire decoiler / pay-off unit | Omron operator panel | Long material handling system | Extensive tooling | Safety enclosure For sale: a complete used WAFIOS R 31 wire straightening and cutting machine with peripheral equipment and extensive tooling. The machine is designed for straightening and cutting wire supplied from coils and is offered as a complete production cell, including the decoiler, wire processing equipment, long finished-part collection system, control equipment, tooling and safety guarding. The system consists of: • WAFIOS R 31 wire straightening and cutting machine • Wire decoiler / pay-off unit • Wire feeding and guiding system • Wire straightening section • Cutting system • Long finished-part handling / collection system Bljdo Abal Rjpfx Afmop • Omron operator panel • Digital weighing system • Electrical control cabinet • Dedicated tooling and accessories • Tool storage cabinet • Safety fencing and access gates • Emergency stop and safety system Technical Specifications • Manufacturer: WAFIOS • Model / Type: R 31 • Machine type: Wire straightening and cutting machine • Machine No.: 2 6108 031 • Operator interface: Omron • Wire supply: Coil / decoiler system • Integrated digital weighing equipment Equipment Included • Wire decoiler / pay-off system • Wire feeding equipment • Straightening and cutting equipment • Long material support and finished-part collection system • Omron operator panel • Digital weighing equipment • Electrical control cabinet • Extensive set of dedicated tooling • Straightening dies and rollers • Wire guides and bushings • Cutting tooling • Tool storage cabinet • Safety fencing around the production cell • Supporting frames and accessories shown in the photos Tooling The machine is offered with a substantial set of dedicated tooling and spare tooling components. The photos show multiple straightening dies, rollers, guides, bushings, cutting components and other machine-specific accessories stored in dedicated drawers. Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell together with its peripheral equipment, material handling system and safety guarding. The machine is offered with the tooling, accessories and additional equipment shown in the photos. Additional Information • Complete production cell available • Wire decoiler / pay-off unit included • Long finished-part handling system included • Extensive dedicated tooling included as shown in the photos • Digital weighing equipment included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility