Motor Actuator Slide valve Valve

1 Posten ca 15x Revo END KSB ROLL Stellmotoren Amaturen Schwenkrantrieb

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: Gbsdox Ap Hpopfx Aaxel -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Gbsdpfx Aasg Npiwjxjl Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: Bay Kessel - BBS Germany Type: HDK 7000 Capacity approx.: 7,000 kg/h Operating overpressure: 10.0 bar Increased test pressure: 18.5 bar Max. steam temperature: 184.6 °C Water content full approx.: 17,500 l Year of manufacture: 2017 CE marking: CE 0036 Gbodpfx Aasx A Dplexsl Equipped with Weishaupt gas/oil burner WM-GL50/1-A, version ZM-R-NR, gas control line, separate control cabinet, feed water pump, Eco, and existing coarse and fine fittings.

Condition: new, Year of construction: 2024, functionality: fully functional, Multiple load banks are directly available from stock. Contact us today if you want to rent, lease, or buy a load bank. - Load bank 100 kW, 400Vac 50Hz, CosPhi 1 (Very compact, easy to carry in a service van) - Load bank 300 kW, 400Vac 50Hz, CosPhi 1 - Load bank 500 kW, 400Vac 50Hz, CosPhi 1 Gsdjr Eyycjpfx Aaxobl - Load bank 600 kW, 400Vac 50Hz, CosPhi 1 - Load bank 700 kW, 400Vac 50Hz, CosPhi 1 - Load bank 1000 kW, 400Vac 50Hz, CosPhi 1 - DC load bank with different voltages and capacities in stock, for example, 500VDC and 1000VDC, 1000 kW. If you are looking for a solution to test at different voltages, such as 440V, 690V, or medium voltages like 10kV, do not hesitate to contact us. We also offer solutions for load banks with a variable power factor (CosPhi) and load banks with a power factor of 0,8 (load bank with a CosPhi 0,8). For example, we have inductive load banks, which we could combine with resistive and load banks, including both. Most of our load banks are equipped with a switch where you can choose between internal and external power for the fans. We offer both stationary and mobile load banks. For mobile purposes, we can add forklift pockets and a robust bracket. We are looking forward to your request.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - - with integrated economizer - Manufacturer: LOOS, Gunzenhausen Type: UL-S 3200 Output: 3,200 kg/h Permissible operating pressure: 13 bar Increased test pressure: 24.7 bar Total water content, approx.: 4,830 l Year of manufacture: 10 / 2006 CE marking: CE 0036 Equipped with Weishaupt gas-/oil burner GL9/1-D/TMD, separate control cabinet, feed water pump, and existing coarse and fine fittings. Integrated economizer type Eco1: Permissible max. pressure: 31 bar Gsdpfx Aaexnxdhsxebl Test pressure: 56 bar Permissible max. temperature: 238°C Thermal output: 124 kW Total volume: 81 ltr

Year of construction: 2012, condition: excellent (used), Item: DP-05180 Godpeh Inqiofx Aaxjbl Rotary lobe pump JEC Type ZF -120-021 From 2012, Inlet 1,5", Outlet 1,5". Engine: 5.5 kW Complete Stainless Steel

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Gjdpfopm U U Nex Aaxebl Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Gbjdpfx Aodkdi Tjaxsl Pressure: 1,6 MPa

Condition: good (used), Year of construction: 1988, operating hours: 9,999 h, functionality: unexamined, overall weight: 3,500 kg, fuel type: diesel, color: blue, output voltage: 400 V, output frequency: 50 Hz, nominal power: 360 kW (489.46 HP), nominal power (apparent): 450 kVA, total length: 3,200 mm, total width: 1,340 mm, total height: 1,800 mm, rotational speed (max.): 1,500 rpm, type of cooling: water, Brand: Mercedes Benz - Stamford Model: 450 kVA diesel generator Year of manufacture: 1988 Serial number: On request Operating hours (read): Unknown Capacity (kVA): 450 Capacity (kW): 360 Gbjdpfx Aajydk Dgoxol Engine brand: Mercedes Benz Engine model: OM444A Fuel: Diesel Alternator brand: Stamford Alternator model: HC534C Voltage: 220 - 380 V Frequency (Hz): 50 RPM: 1500 Amperes (A): 684 Dimensions LxWxH (mm): 3200 x 1340 x 1800 Weight (kg) approx.: 3500 Units in stock: 1 Manufactured in: Germany Comments: Really good visual condition, operating hours unknown, twin turbo.

Condition: excellent (used), Year of construction: 1999, Steam generator: VEA mod.UNIVEX 25G H13 + BWT water treatment and reverse osmosis system - Capacity: 1325kW - Steam generation: 2500 kg/h - Max pressure: 13 bar Gbodpfxoucvi Ns Aaxsl Steam boiler, Steam generator, Industrial boiler, Water treatment, Oil burner, Steam system, Energy industry, Operator-free system, Thermal power - working temperature: 195*C - Burner: WEISHAUPT (year of production 2016) - Year of production: 1999 - Complete documentation - Complete, modern water treatment: BWT