Used 2D Measurement Machine for sale (67,491)

Condition: excellent (used), Year of construction: 2023, Mobile 3D coordinate measuring machine Camera, hand probe with display Dujdpfx Aju S Rnlocwjr Max. Measuring length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated measuring probe camera Measuring accuracy ±(28 + 5 L/1000) μm* Repeatability ±10 μm* Accessories

Year of construction: 1996, condition: good (used), Control UCC lite-2 Measuring range 700 x 450 x 350 mm Measuring heads (MH20i, PH1, PH6) Various touch probes Dedjd Stn Tspfx Acwsur

Condition: used, CNC 3D coordinate measuring machine, MORA type Pico 0245.04.05.06 Machine No. Year of manufacture 2005 Measuring range X = 600 mm, Y = 500 mm Measuring height Z-axis 400 mm Machine table = granite slab 1250 x 1200 mm Slab thickness 200 mm Clearance in machine column 720 mm Axis travel speed - setup max. 65 mm/sec. Axis travel speed - rapid traverse max. 250 mm/sec. Mains connection: 400 volts, 50 Hz - Granite worktop with 200 mm threaded grid - RENISHAW PH10T motorized rotary/tilt head with interchangeable TP20 measuring probe - 1 probe head holder with manual adjustment - Various probe heads - Gemodek Microspeed 10 axis control in adjacent control cabinet - Manual control via handheld control panel with joystick and LCD display - Reference sphere on the table - PC for measuring software: Intel Pentium 4, 512 MB RAM, mounted in the machine base - 22-inch TFT monitor - Windows XP operating system - INCA 3D measuring software (license expired) Duedpfx Acordlrxjwor The measuring machine was operated with a rental license and maintenance contract. Measuring machine footprint: W x D x H 1950 x 1800 x 2450 mm Measuring machine weight: 1250 kg Control cabinet weight: 120 kg Very good condition

Condition: repair required (used), functionality: not functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 450 mm, Mitutoyo BH706 coordinate measuring machine. Mechanically in very good condition, it operated and performed high-precision measurements until the hard drive failure. The machine is being sold as non-functional, intended for refurbishment or upgrade. Dedjyvq Auopfx Acwour Note: The photos of the machine were taken when it was still operational. Currently, the machine is dismantled and packed for loading.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 21021, measuring range X-axis: 700 mm, measuring range Y-axis: 650 mm, measuring range Z-axis: 450 mm, Equipment: type plate available, We are offering for sale a 3D coordinate measuring machine Type: DEA Mistral 070705 Manufacturer: brown & sharpe Dujdpoyk Af Njfx Acwsr Year of manufacture: 1997 Working area: X: 700 mm Y: 650 mm Z: 450 mm Software: Quindos 6 including computer Measuring head Renishaw PH10M Measuring probe Renishaw TP200 touch system + probe change bench with 6 garages Condition: ready for testing Last calibrated: 12/2016 Location: Kassel, Hesse Availability: immediately Condition: see photos We also offer: Witte Alufix modular clamping system Matrix clamping elements Contact us for further information. Technical data, accessories and description of the machine are non-binding. Sale only to commercial customers, returns excluded.

Condition: used, Year of construction: 1999, Measuring machine, coordinate measuring machine, form tester -Handover: in current condition as viewed -Calculator missing, x-axis damaged (Carriage guide defective) -Manufacturer:Mahr, form tester type MMQ 40 -Measuring height: 490 mm -Technical data: see photos documentation -Accessories: incl. calibration and measuring accessories / technical documentation, see photos -Dimensions: 700/450/H900 mm Dujdpfx Acoua Nl Ejwjr -Total weight: 218 kg

Year of construction: 1998, condition: used, Measuring machine, coordinate measuring machine, thread measuring machine, Master Scanner -Manufacturer: IAC, measuring machine Master Scanner Duedpfx Acjqpl Srewor -Type: MSXP 60x25 -without controls -Accessories: including calibration and measuring accessories / technical documentation, see photos -Transport dimensions: 900/400/H700 mm -Total weight: 159 kg

Condition: good (used), Year of construction: 2014, Measuring machine, measuring and marking machine, coordinate measuring machine, coordinate measuring machine, form tester, clamping plate, marking and marking plate, measuring plate, measuring table, welding table, welding table, surface plate Dsdpfjw Hqx Dox Acwour -Manufacturer: Stiefelmayer Type C-System -Digital display: Stiefelmayer type MZ 2000 -Travel paths: X 2450 mm, Y 1215 mm, Z 1645 mm -with: 6x adjustable feet -Accessories: see photos -Measuring plate: 2000/3000/H355 mm -Dimensions: 2540/3000/H2630 mm -Weight: 4660 kg

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: N93040010, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 500 kg, type of input current: DC, overall weight: 2,500 kg, Equipment: documentation/manual, type plate available, For sale: fully operational and working coordinate measuring machine (CMM) from the renowned manufacturer Mitutoyo. Currently in use in the quality control department within the machining industry. Ready for immediate operation without the need for additional investment. Technical specifications: Year of manufacture: 1992 Serial number: N93040010 Design: bridge type Measuring range (X/Y/Z): 700 / 1000 / 600 mm Software: MCOSMOS 3.0 (license assigned to workstation) Computer included The machine operates in a controlled environment: 🌡 20°C ±0.5°C (air-conditioned metrology room) 🎯 Probe head and probing system: Renishaw PH10 head + spare PH10 Renishaw TP200 probe Mitutoyo probe rack – 6 positions (with a set of probes) Condition of heads and probes: very good Ideal configuration for precise measurement of machined components. 📋 Technical condition & documentation: Machine in continuous operation (quality control) Last calibration and service: 17.07.2025 Valid calibration certificate until 31.07.2026 Dusdpfx Acsytccmjwer (issued by an accredited calibration laboratory) Last service: complete replacement of pneumatic hoses (07.2025) Technical condition: very good The machine currently measures components requiring high precision. 📦 Additional equipment: Granite table Original documentation Possibility to inspect the machine in operation Contact details for a trusted service and training provider can be provided 📍 Location & sale: The machine can be inspected by prior arrangement. Sale with VAT invoice. Price: negotiable.

Year of construction: 2013, condition: ready for operation (used), Portable 7-axis coordinate measuring system ROMER Infinite 1.0 SC 5028SC. Measuring range diameter: 2800mm, point repeatability: approx. +/-0.045mm - 0.050mm, volumetric length measurement uncertainty: approx. +/-0.064mm - 0.075mm, wireless communication: Wi-Fi 802.11b/g, battery operation, software base: WinRDS driver compatible with measurement software solutions PolyWorks, PC-DMIS, PowerInspect, Metrolog. Including integrated balancer, transport case, probe set 6mm, 15mm, tip, mounting plate with 3 magnets, calibration bar with calibration certificate. Inspection by appointment possible. Duedoyk Hcrepfx Acwjr

Condition: used, functionality: unexamined, measuring range X-axis: 1,970 mm, measuring range Y-axis: 1,470 mm, measuring range Z-axis: 1,220 mm, CNC gantry coordinate measuring machine LK, model G 80 Granite clamping table size: 3490 x 2080 x 500 mm Longitudinal travel: 1970 mm Cross travel: 1470 mm Vertical travel: 1220 mm Year of construction: 1987, commissioned: 1991 Incl. Renishaw measuring system Special export price: 4,500,- Duodpfjgbdy Rjx Acwsr

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 196-477 NL, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Machine in excellent condition from a measuring room Dsdoyxxphepfx Acweur

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2300 mm Measurements depth 4400 mm Measurements height 3100 mm Machine weight 7000 kg Control Unit Model Siemens 840 D Main Drive Spindle speed range 10000 Duodpfxsx D Nare Acwjr Movement X-Axis Movement 2500 mm Y-Axis Movement 900 mm Z-Axis Movement 850 mm Tools Slots in storage 40 This Hexagon PIONEER 061006 was manufactured in 2013. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Ideal for ensuring product accuracy and consistency. Contact us for more information. Application Types Measuring

Condition: good (used), Year of construction: 2015, measuring range Z-axis: 50 mm, feed length X-axis: 200 mm, travel distance Y-axis: 500 mm, A Mahr contour measuring station is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Mahr GmbH Göttingen • Model: XC-20 With feed device: PCV-200 • Measuring range: approx. 0.2 to 200 mm • Measuring range (in Z): approx. 50 mm • Includes 2x measuring probes: - CP probe arm 350-M/16/16/6.5 double tip - PCV/CD probe arm 350 With measuring stand: ST-500 • Height adjustment range: approx. 500 mm • Hard stone measuring plate: approx. 700x550 mm Duodpfx Aexpw Syecwjr With MCP-21 hand-held control panel Includes Midrange Standard control system • Year of manufacture: 2015 • Condition: Used, functional The MarSurf XC 20 is considered the absolute top-of-the-line device for contour evaluation. The optimally coordinated device configuration offers the highest performance standards. Shipping costs by freight forwarder: approx. £110 You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Year of construction: 2018, condition: ready for operation (used), Media Power consumption 430 VA Duodpfex D E Npex Acwor This KEYENCE IM-7030T optical measurement machine was manufactured in 2018. It features a 10.4" LCD monitor, a double telecentric lens, and motorized XY and Z stages with a movement range of 200 × 100 mm and 75 mm respectively. It supports both wide-field and high-precision measurement modes, ensuring detailed and accurate measurements. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information about this machine. Application Types Measuring

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1001608119, measuring range X-axis: 325 mm, measuring range Y-axis: 175 mm, measuring range Z-axis: 75 mm, workpiece weight (max.): 7 kg, path measurement accuracy: 7 mm, table load: 7 kg, ambient temperature (max.): 35 °C, ambient temperature (min.): 35 °C, Equipment: lighting, Keyence LM-X100T multisensor measuring machine Excellent condition Dsdoylpu Tepfx Acwour including measuring probe Armored glass replacement pane (new) Temperature compensation Machine is from year 2023 Delivers outstanding measurement results with very easy operation. We are selling the device due to upgrading to the largest model of the series.

Condition: like new (used), Year of construction: 2018, operating hours: 1,000 h, functionality: fully functional, measuring range X-axis: 2,000 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 2,500 kg, Coord3 CMM Universal MOT 20.12.10 Dedpfx Ajym Ur Tecweur Renishaw - TP20 electronic probe with SF modules (Standard Force) Renishaw PH10M head Renishaw T3 control PolyWorks | Inspector™ Probing++ maintenance-free license (2018)

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. Duodpsw Titlsfx Acwjr If you have further questions, we are happy to assist you by phone.

Condition: used, Werth Type: Werth SCOPE- CHECK 400 3D coordinate measuring machine Technical data: Measuring capacity (X x Y x Z) : 400 x 200 x 200 [mm] Work table with integrated electrical cabinet : 1600 x 950 x 780 [mm] Max. Weight on table : 20 [kg] Operating conditions, * relative humidity, 40 - 70 [%] * Temperature; 10 - 40 [°C] Measuring precision (20°C, 8 kg, magnification 5X, resolution 0.5 micron) On table, E1 = 1.8 + L/120; E2 = 2.0 + L/150 All positions, E1 = 2.5 + L/120; E2 = 2.9 + L/100; E3 = 4.5 + L/75 Incremental dimensions Ball screw drive with servo motor Optical magnification (video) : 0.5X to 5X Optical field (video) : 13 x 10 [mm] to 1.3 x 1 [mm] Movement on linear guide with ball Combinable illumination : diascopic, episcopic ring LED/axial Voltage: 230 [V] Frequency: 50 [Hz] Power: 2 [kW] Weight: 300 [kg] Accessories CN Lighting Control via software Video sensor IP for detection of measuring contour (screen display) Electronic control for table movement Manual control for table by joystick Predisposition for mechanical probe Calibration, 3D measurement, probe communication software Scope of delivery: (Werth coordinate measuring machine with accessories as shown) Duodpfsu Iub Rox Acwsr Condition: used (Changes and errors in the technical data, specifications are reserved!) Please ask about transportation options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2020, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Professional handheld measurement system for precise 3D measurements directly in production environments. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a dedicated measuring room, complex setup, or special CMM expertise. The device is ideally suited for manufacturing operations, quality assurance, initial sample inspection reports (ISIR/PPAP), in-process controls, as well as for reverse engineering. Technical Data – KEYENCE XM-C1000 / XM-H1000 (XM Series) Measuring System (General) Specification: Measurement range (XYZ): approx. 600 × 300 × 200 mm (depending on setup) Measurement accuracy: ±(8 + L/80) µm (L = measured length in mm) Dedpfxowxvmde Acweur Repeatability: ±3 µm (typical) Resolution: 1 µm Measuring principle: Optical tracking with camera-based detection Calibration: User calibration with calibration sphere possible CAD Comparison: Directly on the device (STEP, IGES, etc.) Export formats: PDF, Excel, CSV, DXF Tolerance analysis: Automatic with color mapping XM-C1000 – Control and Evaluation Unit (Controller) Component: Display: 15” touchscreen Connections: USB, LAN, HDMI, power Storage options: Internal + USB export Software functions: Measurement, CAD comparison, report generation Operation: Touchscreen + pushbutton operation Languages: Multilingual (including German) XM-H1000 – Handheld Probe Specification: Probe type: Handheld with pressure button Feedback: LED status indicator, vibration signal Probe tip: Interchangeable, various tips available Tracking: Detected via controller’s camera system System Characteristics Specification: Operating temperature: 10 – 35 °C Power supply: 100–240 V AC, 50/60 Hz System dimensions (complete): approx. 800 × 600 × 800 mm (depending on setup) Total system weight: approx. 25–40 kg (depending on configuration) Mounting: On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld probe XM-C1000 (Controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & Delivery: Shipping via freight forwarding Collection by appointment possible. International shipping available on request. If you have any questions, need further information or wish to arrange a viewing appointment, please feel free to contact us. (Subject to changes and errors in the technical data and information!) We are also happy to answer any further questions by phone.

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm Dodpfxoxcwxge Acweur - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: good (used), Hexagon Type: Hexagon Optiv Performance 442 Product description: The Optiv Performance 442 3D multisensor coordinate measuring machine combines optical and tactile measurements in one system. The system supports multi-sensor measurements with vision sensor, tactile sensor, TTL laser (Through-The-Lens) and the innovative chromatic white light sensor (cws). The basic device with vision sensor can be modularly expanded with all available sensors. Areas of application: ٠ Use on level ground ٠ Versatile geometry measurements and GD&T analyses with standard accuracy Construction ٠ Design principle: " Low-vibration granite construction with fixed bridge and movable table " Integrated substructure with optional vibration dampers ٠ Guides: " Precise mechanical linear guides in all axes ٠ Drives: " DC servomotors, power transmission via backlash-free ball screws in the center of gravity ٠ Length measuring system; " Incremental length measuring system ٠ Resolution; 0.1 pm Hexagon Optiv 442 multi-sensor measuring device equipped with camera, laser and Renishaw touch probe. - Measuring range single sensor: 410x410x200mm - Dimensions: 1232x910x1663mm - Weight: approx. 940kg - max. load weight: glass plate 30kg - Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) - Max. travel speed per axis: 200mm/s - Camera with 2-stage zoom Dedsu Szpmjpfx Acweur - laser - LED ring light - Renishaw 6-fold probe changer - Renishaw TP200 touch probe - Monitor operation - Windows 7 Ultimate evaluation station - Measuring machine HEXAGON Optiv 442 Electrical connection values: Voltage 115/230 V ± 10% Mains frequency 50/60 Hz ± 5 % Power consumption 1000 VA Weight: approx. 1100 kg Condition: second-hand / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 1-1028-09, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 30 kg, total height: 1,663 mm, total width: 910 mm, total length: 1,232 mm, overall weight: 30 kg, Equipment: documentation/manual, We are offering this used Mahr / Hexagon Optiv Performance MS 442 coordinate measuring machine, year of manufacture 2009. The machine was factory overhauled in 2023, purchased by us, and has seen minimal use since then. Djdpfxoyf N Iyo Acwour Serial number: 1-1028-09 Measuring range: 400x400x200mm Dimensions: 910x1232x1663 Weight: 940kg Maximum workpiece weight on the glass plate: 30kg Includes camera with 2-stage zoom Includes measuring laser Includes LED ring light Accuracy: Length measurement deviation: according to VDI/VDE 2617-6.1 MPEE1: 1.4µm+L/200mm MPEE2: 1.5µm+L/150mm Includes 19" CNC real-time controller based on Windows 10 (32-bit) upgrade kit Includes Renishaw PI200 probe interface Includes Renishaw TP200 probe body Includes Renishaw probe holder Includes various probes & heads Includes OptiChek3D software If you have any questions or need further information, please feel free to send us a message.

Condition: used, measuring range X-axis: 3,300 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 1,300 mm, workpiece weight (max.): 8,000 kg, Pantec control and stand Renishaw PHMQ10 head Probes Dedpfx Aeym Uuzocwour Option for scanning with Kreon Zephyr II

Condition: ready for operation (used), Year of construction: 2010, Measuring length: 500mm, measuring diameter: 160mm, max. workpiece weight: 15kg, axes: 4, measuring mode: optical/laser/fiber probe. Including hydraulic chuck and fiber insert for Werth Fiber Probe. Documentation available. On-site inspection is possible. Dujdpfjwligqjx Acwjr