Cylindrical grinding machine

MSF Gleitlager Gesellschaft S45B

Condition: refurbished (used), Completely overhauled Studer cylindrical grinding machine Gedpfxjxxy A Te Ai Njuc Centre distance: 650 mm Technical data and accessories as per photos and PDF.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Guedpfx Asxdalfei Nec

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Guedpfx Aevca Izei Nec Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm cross travel: 245 mm longitudinal feed: 830 mm Gedpfx Aisu Ng Dgj Nsuc table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW weight of the machine ca.: 2,2 t dimensions of machine: 2,2x2,05x1,6 m Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 - tailstock tapper MK 3 equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. *

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Gedjuyx Hzspfx Ai Neuc

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Guedpeq A Um Refx Ai Njc Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 10,000 rpm, Vices are not included in the scope of delivery! Gujdpfx Aisxb Dyho Noc

Condition: used, Year of construction: 2013, A 4-axis CNC machining center Spinner is available. Travel X/Y/Z: 1600mm/810mm/700mm, rapid traverse X/Y: 18m/min, rapid traverse Z: 15m/min, table dimensions X/Y: 1800mm/810mm, max. table load: 2000kg, spindle speed: 10000rpm, power: 22kW, tool holder: SK40, tool positions: 24, weight: approx. 8000kg. Documentation available. On-site inspection is possible. Godpowqd R Usfx Ai Nsuc

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of turrets : 1 - Number of axes : 6 MAIN SPINDLE - Spindle nose : A2-8 - Max. bar diameter : 80 [mm] - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 x 795 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] COUNTER-SPINDLE - Spindle nose : A2-5 - Max. bar diameter : 51 [mm] - Max. turning diameter : 190 [mm] - Spindle power : 11 [kW] - Spindle speeds : 6.000 [rpm] - C axis indexing precision : 0,001 [°] - Travel : 760 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 42 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.414 x 2.370 [mm] - Machine height : 2.115 [mm] - Machine weight : 6.200 [kg] MACHINE HOURS - Number of hours under power : 15525 [h] - Number of working hours : 12865 [h] EQUIPMENT - CNC : Mitsubishi MSX-850II - Interactive programming : MAPPS III Gedox Tvkrepfx Ai Nouc - Interface : USB / PCMCIA / RJ45 - Tool probe : Renishaw - 3 colors status lamp - Tailstock function - Coolant tank - Chips conveyor : Droite - Spindle cooling unit - Parts catcher - Bar loader : LNS Quick LoadSERVO 80 - Parts conveying strip - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Chuck 3 jaws

Year of construction: 1940, condition: used, Automatic universal hobbing machine for the production of spur gears worm gears Largest milling diameter 120 mm Smallest milling diameter 5 mm Smallest tooth pitch module 0,30 Gusdpfskw T Rmex Ai Njc Largest tooth pitch 2 mm largest milling length 100 mm with all accessories