DCC measuring machine

Mitutoyo BHN706

Condition: used, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Equipment: type plate available, Mitutoyo Crysta Apex C7106 coordinate measuring machine Temperature compensation on all axes Active vibration isolation system from BILZ X-axis measuring range = 700 mm Gedpowhb A Nofx Afkjbn Y-axis measuring range = 1000 mm Z-axis measuring range = 600 mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Renishaw PH10MQ probe head Renishaw SCR200 interchangeable rack Renishaw TP200 sensor Renishaw TP200 modules = 6 units MCosmos measuring software WIN10 PC system, 27" monitor Reference sphere / calibration sphere Optional software upgrade Optional hardware upgrade Full service available upon request

Condition: refurbished (used), Measuring Range X/Y/Z = 900 x 1200 x 850mm Accuracy 4,0 + 4,5L/1000 (origin setup, now better after Retrofit) Completely refurbished 2018 with new Pantec Eagle Pro Controller Gbsdpfxjdpak Ro Afksn Probesystem is Renishaw PH10MQ and SP25M Software Inspect3D Inca Premium actual version Computer is a HP z240 Option : Laserscanner (e.g. Kreon) Probe changer

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Godpfx Afjxm Sxvjkjbn Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: used, Year of construction: 2023, Lathes Travel distance X: 495 mm Travel distance Y :125 mm Travel distance Z: 1560 mm Gedpfey Nxc Aex Afkebn turning length: 1540 mm max. turning diameter: 660 mm max. circulation diameter: 660 mm spindle boring: 65 mm range of revolutions till: 5000 rpm powered tools B-axis: ±120° Tool spindle speed: 12,000 rpm Tool magazine: 38 tools Machine weight: 18,800 kg Condition: rarely used, like new

Condition: excellent (used), Year of construction: 2011, HURCO TMX8MYS H-TS8034 Gbjdpfx Afexg D A Hjkon Year of manufacture: 2011

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller Gsdpfoy Sfx Nsx Afkebn − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Year of construction: 2025, condition: new, New single head saw with up-feed blade Ø 300mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO - Tungsten carbide saw blade Ø 300mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices Gbsdpof Nwxwsfx Afkon - Set up for the extraction of chips and fumes

Condition: new, saw blade diameter 300 mm capacity 90 degrees: round 102 mm capacity 90 degrees: square 90 mm capacity 90 degrees: flat 120x80 mm capacity 45 degrees: round 90/80 mm capacity 45 degrees: square 80/70 mm capacity 60 degrees: flat 90x70/85x70 mm Gbsdpefg Rlaefx Afkjn total power requirement 1,5/2,0 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,5 x 1,05 x 1,0 m The versatile professional metal circular saw. Convincing in performance and price. · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Spindle vice with double clamping arm for low-burr cuts · Cone safety clutch to protect the saw blades. · 2 speeds 33 + 66 rpm · Automatic cooling directly on the saw blade · Double bearing for saw head · 24 V safety switch in the handle with restart lock · Length stop, assembly tool · Closed cast, solid cast superstructures · Miter adjustment on operator side machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 93 / EUR 123)

Condition: new, Bernardo manual metal circular saw CS 315 H Technical specifications Saw blade diameter of 315 x 40 mm Speed 19 / 38 U/min Vice opened Max 150 mm Working height 920 mm S1 motor power output 100% 0,75 / 1,5 kW Motor power S6 40% 1.0 / 2,1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight 235 kg Round solid material 90°: 80 mm 45°: 70 mm Round tube 90°: 80 mm 45°: 70 mm Square shaped tube 90°: 80 x 80 mm 45: 70 x 70 mm Solid material square 90°: 80 x 80 mm 45: 70 x 70 mm Square tube rectangular 90°: 90 x 80 mm 45: 80 x 70 mm Gbedjd Id Ugspfx Afken Rectangular solid material 90°: 90 x 80 mm 45: 80 x 70 mm Properties Gear head for slot working left and right 90 ° swiveling Removable coolant tank in the robust base integriergt Gearbox with hardened and ground Auger and bronze worm wheel Security guard opens automatically when the cutting Precise, 4 guided, self-centering double clamping vise Ergonomically shaped handle with push button for fatigue-free cutting Low speed of the saw blade (19 / 38 RPM) optimal for cutting of full materials Reduction gear low noise running in an oil bath Scope of delivery Coolant system with filter Self centering Vice Base

Year of construction: 2016, condition: excellent (used), 1 used short bar loader make Breuning type ILS RBL 80/12 Year 2016 clamping range 5-80 mm diameter Length 100-1200 mm Gbsdpfeht Rl Eox Afkjn