Other

MERCEDES-BENZ Unimog 417/20 U 1150 L U 900 406 LBW Seilwinde

Condition: used, mileage: 54,780 km, power: 81 kW (110.13 HP), first registration: 06/1993, fuel type: diesel, color: blue, Equipment: all wheel drive, tail-lift, * Our internal no.: 1127 * MB Unimog 417/20 * First registered: France - Utility company, in Germany since 2021 and inspected by MB. * Tail lift Rodpfswvd D Esx Aa Ujp * Winch - Manufacturer: Werner u. Co. Maschinenfabrik GmbH Seilwindenbau * Very good tires * Battery replaced new at MB, 05/2025 * Year of manufacture: 1992 - First registration: 06/1993 * NEW trailer couplings (2 pieces) included loose. * Driver's door trim included loose, as well as a cover for the cockpit. * etc. * Chassis: clean * Engine: clean / dry * Very good overall condition * All information without guarantee * Subject to prior sale * Please refer to our General Terms and Conditions

Condition: used, mileage: 29,232 km, power: 110 kW (149.56 HP), first registration: 10/2000, fuel type: diesel, overall weight: 7,490 kg, color: green, gearing type: mechanical, emission class: euro2, number of seats: 3, Year of construction: 2000, Equipment: all wheel drive, 1106. GW22W194650 Redeqml Arjpfx Aa Usp Flatbed large roof hatch all-wheel drive with locks passenger double seat braked trailer load 8000KG vehicle weight (G) 4660 KG... and much more ---- The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: new, Year of construction: 2026, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 65 mm 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Extraction connector 100/25 mm Worktable dimensions 635×420 mm Expanded worktable dimensions 635×1500mm Motor power 2.2 kW (S1) 400V / 3.1 kW (S6) Weight 110 kg Redpevxhi Ejfx Aa Ujp Dimensions 1450×1000×1100 mm Manufacturer: Cormak

Condition: new, Year of construction: 2025, Seam welding Rjdoh Nu A Njpfx Aa Uop

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 163341, Country of manufacture: UK Voltage: 400V 3-phase AC 50/60Hz, max 58A Dimensions: 200x260x250 cm Net machine weight: 5010 kg Redpfxew T Tp Re Aa Ujp TECHNICAL SPECIFICATIONS Capacities Table dimensions: length 900 mm / depth 410 mm X-axis: 560 mm Y-axis: 410 mm Z-axis: 510 mm Distance from spindle nose to table surface: min. 150 mm, max. 660 mm Distance from spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power: 7.5 kW Feed Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900x410 mm T-slot size (ISO R299): 18 mm / Number: 3 / Spacing: 125 mm Permissible load: 500 kg Distance from floor to table surface: 780 mm ATC Tool Magazine Number of tools: 30 pcs Tool selection: free choice of station number; automatic bi-directional search Tool holder: MAS BT-40 Max. tool diameter in magazine: Ø 80 mm (without adjacent tool: Ø 125 mm) Max. tool weight: 8 kg Max. magazine load: 120 kg Max. tool length: 350 mm Tool change time: 2.9 s (chip-to-chip) Lubricant tank: 1.8 L Feed lubricant tank: 260 cm³ Spindle coolant tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant tank: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min Subject to errors or omissions, all technical specifications are provided without guarantee.

Condition: used, machine/vehicle number: 1383A, mileage: 152 km, power: 127 kW (172.67 HP), first registration: 07/1993, fuel type: diesel, overall weight: 9,716 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, trailer coupling, TUV is NEW!!! truck registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M109A4 is equipped with: Tire pressure regulation system, with which the tire pressure can be changed while driving (ideal for soft terrain, sand, mud.....), four-wheel drive, 6 cylinder Caterpillar diesel engine with turbo and 6598cm? displacement (Pump-Duse without electronics), 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering, air-assisted brakes, 3 front seats, cab has a soft-top and can be driven open, the body has the dimensions L/W/He L/W/H 3660 / 2290 / 1950mm inside, airing, electrical installation with sockets, interior lighting, trunk door at the rear, 3 windows on each side, the km indication are miles, there are several M109 in stock with a speedometer reading of 79 miles to 2155 miles, year of construction 1989 to 1993, driving license class 2 (truck) Perhaps with a little slimming down to 7.49T, tire size 14.5R20 (very good).e 14.5R20(very good condition) Tubeless , Highest speed 90 km / h , 24Volt power supply , The M109A4 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Rsdpfx Aeqx Sxdea Uop

Condition: used, Edge sanding machine Gartner FLK 4 - used - including mitre fence ----- Technical Data ----- Sanding belt width: 200 mm, sanding belt length: 2,350 mm, worktable dimensions: 870 x 400 mm, belt speeds: 4, extraction nozzle Ø: 80 mm, motor: 3 kW Rodpfx Aaexd U Uhe Uop

Year of construction: 2015, condition: excellent (used), Machine for electro-chemical deburring incl. automation, washing system for removing the electrolyte from the parts surface and filtration unit. Rodolgzbnepfx Aa Uop SALE IN EU / SWITZERLAND / UK ONLY.

Condition: used, mileage: 83,000 km, power: 127 kW (172.67 HP), first registration: 09/1985, fuel type: diesel, overall weight: 12,200 kg, color: green, Equipment: all wheel drive, Used vehicle Redpfx Ajlxllpsa Usp * Vehicle no.: - * All-wheel drive 4x4 * Flatbed 5.1m x 2.4m x 0.6m * Leaf suspension * 5-speed manual transmission * 3 seats * Tires 10 R 22.5 * Reduction gearbox * Differential lock * Excellent condition ---- -> Please note that viewing is only possible by prior appointment. Thank you for your understanding. -> Sale only to businesses or for export. The above-mentioned data, photos and equipment list serve solely for the general identification of the vehicle and do not constitute a guaranteed characteristic in the legal sense of sales law! All details and equipment information are supplied WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! The equipment list does not form part of the contract and must be checked on-site in detail by every interested party before conclusion of purchase. Later complaints will not be accepted.

Year of construction: 2023, condition: used, _____Mercedes Benz Unimog demonstration vehicle from 2023 with approx. 200 operating hours and approx. 5000 kilometers.Equipment: 4 cylinder engine with 190 hp, Euro 6, wheelbase 2800 mm, front mounting plate size 3, air conditioning, automatic shift EAS, tilt cylinder, 4-cell hydraulics, snow plow relief, VDO tachograph, heated windshield, front PTO, flatbed 2200x2075x400, registration as a tractor, reversing camera, comfort steering, trailer socket 12 V-13 pin, ABS trailer socket 24V- 7 pin, front socket 24V-7 pin, device socket 32 pin, Jotha body CombiCon 4015U.Further details are available on request.,Storage location: 93095 Hagelstadt Redpfxovz R T Ss Aa Uep