Band Saw

MEP PH 211-1 HB

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping Fodpfsilk H Tex Afnofu - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: new, Year of construction: 2024, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Ffedpfxjgculvs Afnju Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath Ffedpfx Ajlb I Daofnju - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm Ffsdshpktvopfx Afnju band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° R: 230 mm square 45° R: 220 x 220 mm flat 45° R: 230 x 150 mm round 60° R: 140 mm square 60° R: 140 x 140 mm round 45° L: 200 mm square 45° L: 175 x 175 mm flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double mitre saw with swivel saw arm from left -45° to right +60° - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration work - With 2 saw blade speeds for optimum adaptation to the workpiece - Hydraulic lowering cylinder - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results Ffodpfx Aoiqt Rlsfneu - CE/IEC, German documentation and German service Scope of delivery: - BiMetal band saw blade 2925 x 27 x 0.9 mm - Band tension adjustable via pressure gauge - Carbide guides - Quick-clamping vice - Material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system Fodoxta N Aopfx Afnsfu - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: new, The SBS 255, part of the Horizontal Mitre Cutting Bandsaws category and the Semi-Auto Bandsaw group, is a compact, robust machine designed for efficient machining of small batches. This universal workshop band saw features a one-piece cast-iron saw frame that is torsion-proof and swivels 60° to the right and 45° to the left, allowing for versatile cutting options. With a rigid vise equipped with lateral slide and long guideways in the movable jaw segments, users can achieve precise cuts on various workpiece sizes, thanks to the combination of carbide jaws and adjustable ball bearing guides. The SBS 255 operates quietly, ensuring short machining times and easy handling, which leads to increased productivity. Additionally, it is powered by a strong motor for continuous operation and comes with a high-capacity coolant system. Included with the saw are essential tools like a saw blade, base, pressure gauge, and operator instructions. KNUTH provides the quality assurance you expect, so order online today to enhance your workshop with the SBS 255 Horizontal Mitre Cutting Bandsaw. Ffjdeuyiqdspfx Afnou

Condition: used, Year of construction: 2011, cutting diameter 260 mm saw band length 3340 x 27 x 0,9 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 380 x 260 mm band speed 37 / 74 m/min sawing motor 1,5 kW weight of the machine ca. 0,62 t Ffjdpewkvq Hsfx Afneu dimensions of the machine ca. 1,7 x 1,4 x 1,3 m Miter band saw - Semi-automatic - Double miter - Material detection during lowering - incl. 7 saw blades

Condition: new, Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting area round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting area round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m / min Motor power: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Fsdpeilk E Dofx Afnjfu Weight approx.: 85 kg Features: - Saw arm can be tilted up to 60 - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low-noise due to stable design - Micro limit switch switches off at the end of the cut - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Incl. base frame Scope of delivery: - Bi-metal saw blade 1735 x 13 x 0.65 mm, 6/10 tpi - Quick-clamping vice - Material stop - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe

Condition: new, Year of construction: 2026, The CORMAK ZS-40B industrial geared pillar drill is a solid tool with great potential. Equipped with a height-adjustable swivel head, automatic threading device and a precision handwheel, it ensures flexibility and accuracy in work. The powerful engine guarantees high drilling efficiency, and the solid construction and hardened oil gear wheels ensure stability and durability. The drill comes with a set of threading holders, extending the capabilities of this professional tool. Additionally equipped with autofeed and cooling. Machine characteristics Very high work flexibility thanks to the swivel, height-adjustable head Cooling system L/R rotation, automatic threading device Precision handwheel with depth scale Hardened oil gear wheels Ffjdpfx Afsridv Sjnsu High stability and quality of processed elements thanks to a solid base. Powerful motor ensuring good drilling performance. Rigid, thickened column with a polished surface Large turntable with height adjustment Possibility to set a vice Technical data DRILLING DIAMETER (CAST IRON/STEEL) 40/32mm THREADING (CAST IRON/STEEL) M32/M24 COLUMN DIAMETER 115mm SPINDLE DISTANCE FROM THE COLUMN AXIS 260mm MAX. DISTANCE OF THE SPINDLE END TO THE WORK TABLE 754mm MAX. DISTANCE OF SPINDLE TIP TO BASE 1270 mm SPINDLE TAPER MK4 SPINDLE SPEED 50 - 2520 rpm. NUMBER OF GEARS 6 FEED RANGES 0.12; 0.18; 0.25 mm/rev DIMENSIONS OF THE WORKTABLE SURFACE 354x575mm OVERALL HEIGHT 2120mm ENGINE POWER 1.5 kW POWER 400V/50Hz WEIGHT U 350kg