Car carrier truck

MAN TGM 15.290 Maschinentransporter

Condition: excellent (used), functionality: fully functional, mileage: 180,264 km, fuel type: diesel, color: yellow, empty load weight: 23,500 kg, axle configuration: 2 axles, number of seats: 2, first registration: 07/1998, next inspection (TÜV): 07/2026, Year of construction: 1998, operating hours: 18,712 h, For sale: Liebherr 1030-2 truck crane with a lifting capacity of 30 tonnes. Technical condition: fully operational. Njdsxava Repfx Ad Eocn The crane was overhauled in 2025. Details to be discussed during on-site inspection. The crane holds a valid technical inspection until 23/07/2026 and a current UDT operational permit valid until 31/07/2026. The vehicle has a valid third-party liability insurance policy. The vehicle is registered in Poland. The crane has been operated by the current owner since 2014. Purchase directly from the actual user! We are not intermediaries or traders. On-site inspection and machine testing possible at the facility in Brodnica (87-300), Poland. The machine is ready for work.

Condition: new, machine/vehicle number: 1, empty load weight: 7,500 kg, maximum load weight: 22,500 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 10,070 mm, loading space width: 252 mm, loading space height: 85 mm, suspension: air, tire size: 245.70 r 17,5, color: yellow, Year of construction: 2022, Equipment: ABS, tail-lift, 10.70m new ceylan 2-axle truck 2 axles, 1st liftable and 2nd steerable, ebs, air suspension, 8 ton side rud hooks cad1, pier seats and slots in dock x belt anchorage, 4.0m total electro hydraulic double ramps, h.from ground platform 85cm, platform length 7.0m, WARRANTY and READY FOR DELIVERY SAFETY, INTERDRIVE SRL-PARMA CONCESSIONARIA Ncsdpoh Utdlefx Ad Esn

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h Legal Gross vehicle weight: 49,500 kg / 31,500 kg Fifth-wheel load: 18,000 kg Axle load: 31,500 kg / 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm King pin trailing radius (rearwards) approx.: 2,100 mm Saddle height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross vehicle weight depending on fifth-wheel load: Yes Special permit is required for exceeding country-specific regulations. Technical Description Gooseneck: Gooseneck in SNT Design for optimized loading platform length, length approx. 3,900 mm, rear with chamfer approx. 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Loading platform: Loading platform, length approx. 9,600 mm with rear chamfer approx. 900 mm x 6°. Loading platform behind the gooseneck hydraulically raisable and lowerable, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-part AXS steel ramps approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps can be hydraulically shifted individually by approx. 235 mm outwards and approx. 365 mm inwards. Maximum load capacity and approach angle per technical data sheet: C470319 Maximum ramp angle with lowered loading platform: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lift/lower valve. Axle tool kit. Tyres: 235/75 R 17.5 3PMSF twin tyres. Manufacturer of our choice Load index 143/141J (144/144F) Braking system: WABCO EBS-E braking system according to EU regulations. Without connecting cable to tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" version as per EU regulations. (ASS 3) Metalizing: Complete HRM metalizing (High Resistance Metallisation) Complete steel structure shot blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). Painting 6K final treatment: Complete steel structure shot blasted after welding. 1 coat zinc-based primer, 1 coat bonding primer. Final painting with 2 coats 2K (acrylic) single-colour in RAL shades of your choice, then cavity sealing with special wax. Rims in silver. Multi-colour and special painting at extra cost. Steel construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG welding process to EN ISO 4063. Protective gas M21 per EN ISO 14175 Front wall of steel, plug-in, approx. 400 mm high Connection board for supply lines to the tractor unit at the height of the outer frame profile. ASPÖCK-UNIBOX at the front plug connection board with sockets 24N, 24S & 15-pin. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 Njdpsizu Ntefx Ad Ejcn If your pin configuration deviates from the ISO standard, please inform us. “Anderson” socket at the front connection board. Rema 78051-00 & Amp. 150 V. Cable for supply to electro-hydraulic unit and/or electric winch (35 mm²,

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-axle stepped saddle plateau with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross beams made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate with all necessary chassis reinforcements and cross connections Axles 2 BPW axles with a load capacity of 10,000 kg each with 17.5" drum brakes ABS: 1 axle sensing Wheelbase: 1,810 mm Tires 8-wheel type 235/75 R17.5 Rims Aluminum rims, 10-hole, centered, ET= 122 mm Lighting system 24V lighting system in accordance with EU directives 76/756/EEC ff. with: 2x2 three-chamber LED lights 1x reversing light LED 1x LED fog light LED side marker lights Lane departure lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket connected according to EU standard Floor Galvanized grating covering on drop deck Steel tear plate in the axle area Load securing Outer frame with lashing hole profile D030 mm in the slope 2x12 lashing points 8,000 daN in the outer frame 3x combi row of stanchion pockets for 80x80 mm stanchions in the drop deck Accessories 2x wheel chocks with holder Spare wheel holder Winch 2x storage box with drawer (chain storage) Surface protection Steel construction: blasted and primed Ncjdpfon Hrtgox Ad Een Coloring Chassis/frame/floor frame: single color in RAL 3020 (traffic red) Axle hubs: single-colored in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminum Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beam 360 ° working range approx. 90 % to the front For further information please do not hesitate to contact us

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,900 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater Nsdpfxjxqkayo Ad Eecn - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Innovative wet blasting technology for perfect surfaces – Efficient. Environmentally friendly. Safe. The future of surface finishing begins here: With wet blasting solutions from Proton Maschinenbau GmbH, you can rely on uncompromising quality, maximum occupational safety, and state-of-the-art technology. Whether manual or fully automated, our systems guarantee precise cleaning, effective deburring, and optimal preparation for coatings, painting, or further processing. Our wet blasting systems combine water, compressed air, and a suitable blasting media to create a highly effective cleaning process that offers clear advantages over conventional dry blasting: ✔ 100% dust-free operation thanks to the integrated jet pulse filter system ✔ Homogeneous, contamination-free surfaces – no chemical additives ✔ Gentle processing of sensitive materials without embedding blasting media ✔ Optimal results for degreasing, paint stripping, structuring, and cleaning ✔ Energy- and resource-efficient process, suitable for numerous blasting media ✔ Ideal for demanding industries such as aviation, medical technology, the automotive industry, or toolmaking Our portfolio includes, among others: 🔹 ST1 & ST5 – Compact manual wet blasting cabinets with precise foot pedal control 🔹 ST6 – Specialized machine for rim processing up to 26 inches 🔹 ST12 – Fully automatic drum system with recipe management and intelligent control 🔹 ST17 – Ergonomic system with rotating platform, wash basin, and transport trolley All machines feature: 🔧 Stainless steel housing with laser seam 🖥️ Intuitive PLC touch panel with programming and maintenance instructions 💡 LED interior lighting, safety features, and automated media return Areas of application: Cleaning aluminum or plastic molds, deburring precision parts, preparing implants or prototypes from additive manufacturing – we offer the right solution for every application. Proton stands for: 2-year warranty on manufacturing quality, 10-year spare parts availability, personalized consulting, and robust systems "Made in Germany." Ncjdpfxewdpq He Ad Eon 👉 Discover the advantages of wet blasting technology now – and reach a new level of surface finishing.

Condition: new, 0 199,5 x 67,5 x 64 mm operating pressure 2,5 - 8,0 bar air consumption at 6 bar 350 l/min weight of the machine ca. 0,23 t dimensions 2,10 x 1,30 x 0,88 m Duo blast cabinet 10 PET sheets to protect the windows Ncedpfx Adsupxfze Ejn 10 PET sheets to protect the fluorescent lighting 2 foot pedals 2 jet guns 6 ceramic nozzle inserts (6 mm diameter)

Condition: used, color: other, Year of construction: 2018, operating hours: 2,427 h, Power internal combustion engine: 47 HP (35 kW) GVW: 4.790 kg Make of engine: Perkins CE mark: yes Serial number: 1921562 Machines for Sale Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Njdpfx Aeryv Hzsd Escn Discover our wide range of reliable machines. 

Condition: used, mileage: 528,000 km, power: 213 kW (289.60 HP), first registration: 06/2015, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, parking heater, * Multifunction steering wheel * Air conditioning * Auxiliary heating * Leaf/air suspension * Cruise control Ncedpfxswcvups Ad Ejn * Tail lift * Engine brake * Wheelbase: 5125 mm -----Internal vehicle number: 10910----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to message us conveniently via WhatsApp.

Condition: used, mileage: 109,000 km, power: 206 kW (280.08 HP), first registration: 04/2015, fuel type: diesel, empty load weight: 9,200 kg, maximum load weight: 16,800 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,500 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,300 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, soot filter, Scania P280 6X2*4 chassis First registered: 04/2015 Only 109,900 km with documentation Euro 6 Short cab Automatic transmission Retarder Air conditioning Lane departure warning system Adaptive cruise control Air suspension front and rear Nsdpfexqqw Eox Ad Ejcn 3rd axle liftable and steerable Weight variant 28,000 kg Axle loads 9,000 kg / 11,500 kg / 7,500 kg Wheelbase 4,500 mm Frame length 6,300 mm Tyres 385/65 R22.5 profile approx. 50% Tyres 215/80 R22.5 profile approx. 50% Unladen weight 9,200 kg The vehicle is from first owner and is in well-maintained condition. Export/net price: 22,900 euros. All information without guarantee, errors excepted.