Truck mounted crane

MAN 26.360 TGS Pritsche + PK 16502 Kran 6x2

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 15 h, load capacity: 6,000 kg, lifting height: 26,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating Telescopic Handler Mast type: Telescopic Transmission: Hydrostatic Speed Category: 20 Condition: New machine Technical Condition: New Front Tyre Type: Pneumatic Front Tyre Size: 18 - 22 Front Tyre Condition: 80 - 100% Rear Tyre Type: Pneumatic Rear Tyre Size: 18 - 22 Cedpewbw Hkofx Abbeaa Rear Tyre Condition: 80 - 100% Description: Thanks to its 3-in-1 design (telescopic handler, crane, and aerial work platform), the MRT 2660 is a highly versatile solution for your handling operations. The MRT 2660 boasts a maximum lifting capacity of up to 6 tonnes and, thanks to its pentagonal boom cross-section and outstanding 360° visibility, ensures precise control of your loads. The 360° continuous rotation enables you to perform various tasks without repositioning the machine. It can be operated on wheels or stabilisers, providing a larger footprint for safe working conditions. Intelligent, ergonomic, and comfortable, the MRT 2660 is ideally suited for construction and industrial applications. This is a powerful and precise tool you won't want to do without! Various attachments including a personnel basket, winch, or bucket are available for this telescopic forklift. 3rd hydraulic circuit, heater, full cab, air-conditioning system, Remote control for both work and drive operations.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed Caodpfx Absiyya Ajboa 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: good (used), Year of construction: 2010, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm Csdpogl Duzefx Abbeaa -Weight: 127 kg / piece

Condition: new, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #307 MAN TGS 35.510 8x4-4 BL Kroll K 1,0-18,0 /36PESP, suction cup superstructure * KROLL * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tanker K 1.0-18.0 /36PESP * 18,000 liter tank size (air volume) * 15,000 liters sludge volume I 3,000 liters emulsion chamber * 1,000 liters rinsing water volume (unpressurized) * Emptying with discharge piston Chassis* MAN TGS 35.510 8x4-4 * 8x4-4 BL * TipMatic Caodpfx Ajvh H Hbobboa * 510PS/375KW * 2600 Nm * EURO 6 * Fuel volume 400l * Chassis color RAL 9010 pure white * Color cab RAL 9010 pure white * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning * Cool box Vacuum system* CVS VacuStar W1600 approx. 1,550cmb/h at 400mbar * Approx. 30m suction hose DN80 on the tank lid with announcements High pressure system* Speck P52/100-150 100l/min at 400mbar * Small hydraulic HP hose reel for 60m DN 13 hydraulic * Approx. 60m DN 13 flushing hose Special features* ADR version L4BH type class FL incl. EX/II, EX/III and AT * Suction connection pre-piston chamber DN100 remote-controlled. * Manhole FN500 on the left side * HP gun * Noise protection cladding in front of the pumps left and right * Removable and swiveling halogen work lights * LED ambient lighting * Radio remote control with two batteries * Tiltable scrap box * Rear view camera * Ladder with bracket and anchor points * Advertising panel on the left and right of the container Technical data* GGW 32,000KG * Length 10,700mm * Height 3,800mm * Width 2,550mm * Wheelbase 3,900mm For more detailed information and/or pictures please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty. For further detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting Caodoxd U Saspfx Abbea - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: ready for operation (used), Year of construction: 2019, Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available. Casdpstlucnsfx Abbsa

Condition: good (used), machine/vehicle number: 98260075, one used profile steel shear WMW Punching capacity 420kN(42Tons) throat of the punch 320mm flat steel shear shears 100x18mm bar shear shears solid material round/square 36/30mm Cajdpfxjb Ilbfj Abbea Further technical data on request.

Condition: used, The Horizon APC-T61 is a high-performance hydraulic guillotine designed for precision cutting, ideal for small and medium-sized printers and binderies. This machine is practically new, fully operational, and ready for immediate production. Key features of the APC-T61 include its ability to save programs to memory, an electronic digital display with an accuracy of 1/10 mm, and easy program initiation with a Zollstart Zoll button. The knife beam and hydraulic pressure drive ensure precise and efficient cutting. Technical specifications of the APC-T61 are as follows: Cutting length: 610 mm Batch depth: 620 mm Pile height: 100 mm Power supply: 380V / 50Hz Power: 3 kW Weight: 700 kg The machine comes with a comprehensive set of accessories, including a spare knife, shaft, operating tools, tapping block, and manual. Currently in stock and located in Germany, the Horizon APC-T61 Hydraulic Guillotine is a reliable and efficient solution for your cutting needs. Format: 610 mm Equipment: Horizon APC-T61 Hydraulic guillotineThe machine is practically new, fully operational, ready for h-performance, precise hydraulic cutter ??? for small and medium-sized printers, bindery Control:Ability to save programs to memoryelectronic digital display with an accuracy of 1/10 mmstarting the program with the Zollstart Zoll buttonKnife beam and hydraulic pressure drivecutting linepre Cjdpsw Irlgsfx Abboaa Technical data:Cutting length 610 mm 620 mm batch depth Pile height 100 mmPower supply 380V / 50Hz3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manu

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch Caedpfx Aecc Ubuobbsa -Pressure force: 40 to -Punching -Scissors -to cut -notch -mechanical release -Foot switch: 1 -div. Punches and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Condition: used, Year of construction: 2002, Roundpilefeeder RD.2-78 1 station TD-78 6 pockets 2. station TD-66 4 pockets Delivery SBP-M 86.D Glueing device Rear -and front-mounted slitter shafts Gate-fold unit Caedpfx Aboud U D Ijbea Available: at short term