Malvern Archimedes Particle Metrology plus PC

Malvern Archimedes Particle Metrology

Condition: ready for operation (used), functionality: fully functional, color: grey, Year of construction: 1988, Aeroplex fluidised bed counterjet mill 400 AFG The plant is fully functional and can be inspected on site. Trial milling can be carried out in advance depending on the material. In 2005, the plant was modernised and converted to load cells. Electrical control system: Simatic S7-300 The plant consists of the following units: 1. Mill Kedpex T Ar Nofx Aqgodl 2. Raw material filling unit 3. Air filter 4. Electrical switchgear

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter Kdjdjx Ac Rbepfx Aqgsl

Condition: used, functionality: fully functional, OlympusIX70-S8F Inverted Fluorescence Phase Contrast Microscope. This Olympus IX70 microscope is capable of phase contrast, DIC, and fluorescence. It comes with an ergonomic tilting binocular head with 10x eyepieces. The microscope has a front and side photo port for adding a camera. The 0.5 N.A. condenser has DP10 and DP20 DIC prisms and Ph1, PhC phase annuli installed with the IX-LWPO polarizer. The 5 position fluorescence turret contains WIBA, and NU fluorescence filters. Also included is the IX-AN analyzer and U-DICT DIC prism. The microscope has a built in 1.0x / 1.5x mag changer. Kdodpfx Asuax T Soqgol Good working condition. Please check out our other listings as well.

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Pin speed (frame side) : 16 500 rpm Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2 Kdsdpjx R Avvefx Aqgol   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Handling trolley  

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Kdodpfxexv A T Nj Aqgol Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: used, Stereomicroscope, projection enlarger, microscope, projector MOTIC type SL-41 Series Year of manufacture: approx. 1995 Magnification lens W10X/20 Power supply 230 Volts, 50Hz - Table stand with power supply for reflected light - Height-adjustable objective head - Round column stand with large outreach, inclinable extension arm - Light source for incident light 12 Volts, 10 Watts Space requirement (L x W x H): 500 x 140 x 350 mm Weight approx. 10 kg Kdjdpfxoxtq Aae Aqgol Good condition

Condition: used, his listing is for the BIOCHROM WPA Biowave II UV/Visible Spectrophotometer The unit is in full working condition and is ready for immediate use BIOCHROM WPA Biowave II UV/Visible Spectrophotometer The Biochrom WPA Biowave II is a compact, high-performance UV/Visible spectrophotometer tailored specifically for life science laboratories. It integrates advanced optics, user-friendly design, and flexible analytical capabilities, making it a go-to instrument for researchers performing nucleic acid and protein quantification, among other applications. Key Features and Benefits Wavelength Range: 190–1100 nm (UV and visible spectrum) Optical Design: Monochromator with holographic grating — novel optics with no lid or moving parts Detector: High-resolution 1024-element CCD array Light Source: Long-life Xenon lamp for energy efficiency and extended performance Display: Graphical backlit LCD for easy visualization of wavelength scans, kinetic assays (with slope calculation), and standard curves Sample Volume: As low as 10 µL with quartz cells (ideal for precious or limited samples) Cell Compartment: Designed for 10 µL volume, compatible with quartz cuvettes Data Export Options: USB interface (CSV format), integrated graphical thermal printer, or PC via Print Via Computer (PVC) software (included) Pre-Defined Methods: Nucleic acids (DNA, RNA, oligonucleotides), proteins (BCA, Biuret, Bradford, Lowry), and cell culture (cell density) Measurement Modes: Fixed wavelength (Abs/%T) Absorbance ratio Concentration (standard curve, factor) Multi-wavelength Kinetics Life science methods Kedpfjxl Eyqjx Aqgedl Cell density Scientific Applications Nucleic Acid Quantification & Purity Checking: Visual scans reveal impurities (e.g., 230 nm region for RNA) Protein Assays: BCA, Biuret, Bradford, Lowry Cell Density Measurements Kinetic Studies: Real-time monitoring of reaction rates Low Volume Samples: Ideal for precious or limited biological materials

Condition: repair required (used), Mill for recycling waste and plastics. Manufacturer: ALPINE AUGSBURG Type: RO 63/50 Motor power: 50 kW Feed hopper dimensions: 400 x 500 mm Included: 16 interchangeable screens with mesh sizes from 1 to 50 mm Machine dimensions: 3000 x 2000 mm Height with conveyor: 4200 mm Kedpfx Aew E Nw Noqgedl Weight: 7000 kg Technical condition: used machine, no electrical installation.

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, For sale: Siemens ADVIA Centaur CP immunology analyzer, used only 6–7 months. The device is in excellent technical and visual condition, fully functional, with no defects. The analyzer is suitable for medical and clinical laboratories seeking high-precision and reliable immunological diagnostics. Key features: Manufacturer: Siemens Model: ADVIA Centaur CP Type: Immunology analyzer Condition: Used – like new (6–7 months in operation) Application: High-accuracy immunology testing Operation: Automated analysis delivering fast and reliable results Advantages: - High sensitivity and precision - Suitable for medium and large laboratories - Proven, well-established technology - Stable performance under heavy workload Reason for sale: The device was purchased for a laboratory that ceased operations about 6 months after acquisition; therefore, the analyzer is no longer in use and is offered for sale. Additional information: Upon serious inquiry, the following can be provided: Kdjdpfoyhfl Hsx Aqgol - Additional photos - Technical documentation - Serial information

Condition: used, This listing is for 1 of 4 Watson Marlow 323 Peristaltic Laboratory Pumps Kdjdpfx Aqeygmdhsgol Each unit is in full working condition and is ready for immediate use The Watson-Marlow 323 is a peristaltic laboratory and process pump designed for precise, controlled fluid movement, dosing and metering of liquids in scientific, pharmaceutical, biotechnological and industrial environments. It works by mechanically squeezing a flexible tube in a circular “rolling” action — this moves the liquid without it ever contacting internal pump parts, which reduces contamination and wea