Used Weiss Temperature Shock Test Chamber for sale (17,791)

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! Bledpfozii A Rsx Aqtji The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Bedpfxjzh D N As Aqtoli Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without... approx. 1820 mm, with... approx. 1850 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), RS Simulators Type: ST2K320/45 Water-cooled shock testing system Operating climate range Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 850 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Bledpfx Aqozgbumjtei Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here, we offer a temperature shock test chamber with a 100-liter usable volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design Bledpozfg Upsfx Aqtji 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Type: TSD-100 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Water-Cooled Specification: Blsdpszd Ulgsfx Aqtsi Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Bledpfx Aqezd Sfdotei Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Water-Cooled Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Switching time, hot/cold chamber: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without... approx. 1820 mm, with... approx. 1850 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /18.7 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a temperature shock testing chamber. Weiss temperature shock testing chamber, air-cooled Specification: Temperature range, warm chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Changeover time, warm/cold chamber: 10 s Bledpfx Aezd Sd Hjqtoi Temperature stability: ±1 K Dimensions and other data: External dimensions: height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lifting platform (test chamber): height 450 mm, width 500 mm, depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without... approx. 1820 mm, with... approx. 1915 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Bsdpfx Aqezd Sdyjtjli Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS temperature shock test chamber for temperature change and shock testing in industry, research, and development. Technical data: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Changeover time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection class: IP 22 Refrigerant: R404A: 2.3 kg / R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Further data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male Equipment: Two-chamber system (hot / cold chamber) Digital CTS control Display / control panel Program operation Operating hour counter Observation window Interior lighting Temperature limiter Test specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick start guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Optical condition see pictures Scope of supply as shown in the pictures Inspection possible by appointment. Loading can be organized. Blodpfx Aoy I Ntcjqtji Commercial sale (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Espec Bledpfxsxugq As Aqtji Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 Environmental Test Chamber is designed for laboratory applications that require testing of materials and components in a known environment. With its versatile capabilities and easy-to-use controls, this programmable unit can be used to simulate a variety of environmental conditions for scientific studies, product testing and process control. Data for temperature tests in single chamber operation Hot chamber: Temperature shock test chamber Test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation in space ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber Test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation in time in the middle of the usable space ± 1 K Temperature deviation in space 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air) Heating 1.5 K/min Cooling 4K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10 % , 50 Hz Rated power: 30 kW Rated power: 50 A Refrigerant: R-404a /R-23 Chiller: Water-cooled Weight: approx. 940 kg Year of construction. 1998 Test room dimensions: Width 770 mm x depth 650 mm x height 610 mm Bedpfx Aqswbdv Soteli Housing dimensions: Width 1200 mm x depth 1800 mm x height 2050 mm TS 05 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Bjdpfxox Exmts Aqtoli Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Bsdpfx Aeziizyeqteli Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Vötsch Model: VTS 7018-5 Water-cooled Temperature Test Chamber System retrofitted with R-452A Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10.0 kW, Rated current: 21 A Main fuse (on-site): 32 A slow-blow Sound level at 1m distance (free-field measurement): < 69dB (A) Side port: 50 mm / 125 mm Chamber is water-cooled Refrigerants: R-452A and R 23 Weight approx. 460 kg For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Blodpfx Asziixxoqtoi Condition: used Scope of delivery: (See picture) (Technical data may be subject to change or error!) If you have any further questions, we will be happy to answer them by phone.

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Blodpfxjziiw Is Aqtei Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-cooled Two-chamber design Hot Chamber: The temperature range of the hot chamber extends from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold Chamber: The cold chamber temperature range is from -80°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Bledsziiwzjpfx Aqtei Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Hot chamber temperature range: +50°C to +220°C Cold chamber temperature range: -80°C to +70°C Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Port diameter: ∅ 67 mm Voltage: 3/N/PE AC 400V +10% 50 Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R452-A / R23 Weight: 1,000 kg Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg Blsdpfx Aezh Htwoqtoi For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Bsdpfx Ajzh D S Rsqtoli Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Bedpfx Aozh D E Roqteli Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch temperature testing chamber, water-cooled Performance data: With a temperature change rate of 25 K/min Test chamber dimensions: height 750 mm, width 580 mm, depth 615 mm External dimensions: height 1775 mm, width 780 mm, depth 1895 mm Temperature range: -72°C to +180°C Temperature deviation (over time): ± 0.1 to ± 0.5 Temperature homogeneity (spatial): ± 0.5 to ± 2.0 Temperature change rate (cooling): 25 K/min Temperature change rate (heating): 25 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test volume: 270 liters 2x side ports, diameter 125 cm 1x side port, diameter 50 cm Chamber is water-cooled Test chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Rated current: 44 A Refrigerant: R-452A and R-23 Weight: approx. 980 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See image) (Changes and errors in the technical data and specifications are reserved!) Blsdpfszg Eygjx Aqtoi We will gladly answer any further questions you may have by phone.

Condition: excellent (used), ESPEC PL-2KPH Climate Test Chamber Manufacturer: ESPEC CORP. Type: PL-2KPH Machine Type: Temperature and Climate Test Chamber Test Chamber Volume: 225 l For sale is a used ESPEC climate test chamber, type PL-2KPH. The unit is suitable for temperature and climate tests, environmental simulations, material and electronics testing, as well as applications in research, development, and quality assurance. Technical Data Temperature Range: -40 °C to +180 °C Humidity Range: approx. 10 to 98 % RH Humidity Fluctuation: ±2.5 % RH over time / ±3.0 % RH Heating Rate: approx. 3.5 K/min Cooling Rate: approx. 1.1 K/min Internal Dimensions (W × H × D): 500 × 750 × 600 mm External Dimensions (W × H × D): 910 × 1,590 × 973 mm Power Supply: 400 V AC / 3~ / 50 Hz Connection: CEE 16 A Max. Current Consumption: 11 A Refrigerant: R404A Weight: approx. 300 kg Equipment Programmable Microprocessor Control Control Panel Timer Function Error Code Display Audible and Visual Alarm Over-temperature Protection Bledpfx Aqjzg D Rqjtji Test Specimen Protection Test Chamber Lighting Operating Hour Counter Application Areas Temperature Testing Climate Testing Environmental Simulation Material Testing Electronics Testing Automotive Battery Testing Quality Assurance Research and Development Condition Used Visual condition as shown in the pictures. Scope of Delivery ESPEC PL-2KPH Climate Test Chamber Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), RS Simulators Type: ST2K320/45 K Shock test system, water-cooled Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Humidity levels in the upper test chamber Climate temperature range: +40 °C to +90 °C Humidity range: 20% to 98% (± 2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Bjdozgbutepfx Aqtjli Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Total power: 13 kVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here, we offer a Weiss temperature chamber. Weiss temperature test chamber with S!MCON / 32 control, air-cooled (Refrigerant converted to R-452A) Control panel »Touchpanel« On the »Touchpanel« control panel, all control and operating commands can be triggered by simply touching the function symbols. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine part, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and test equipment to be placed in the test chamber. Feedthrough installed as standard R1: 125 mm L1: 50 mm Test chamber volume: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W Data for operation: Test chamber lighting: halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse, to be provided by the customer: 16 A, slow-blow Sound pressure level approx. measured at a distance of 1m from the front, 1m height: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone. Bljdpfxozga Hus Aqtji

Condition: excellent (used), CTS TS-70/200-5/S Temperature Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Machine Type: Temperature Testing Chamber / Stress-Screening Testing Chamber Test Chamber Volume: approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 8 K/min Temperature Change Rate (Cooling): approx. 6 K/min Max. Heat Radiation at +20 °C: approx. 3500 W Test Chamber Dimensions (approx.): 650 x 400 x 750 mm (W x D x H) Housing Dimensions (approx.): 920 x 1345 x 1800 mm (W x D x H) Weight (approx.): 550 kg Power Connection: 400 V 3/N / 50 Hz Power Consumption: 10.9 kW Rated Current: 15.7 A Protection Class: IP22 Refrigerant, Pre-cooling Stage: R404A Refrigerant Quantity, Pre-cooling Stage: 2.5 kg Refrigerant, Cooling Stage: R23 Refrigerant Quantity, Cooling Stage: 0.6 kg / 15 bar Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side openings as shown in the pictures Shelves / test chamber equipment as shown in the pictures Over-temperature test specimen protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Areas of Application Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery 1x CTS TS-70/200-5/S Temperature Testing Chamber Shelves / test chamber equipment Existing documentation / documents Accessories as shown in the pictures Bodpfx Aqozf Hi Hstjli Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: excellent (used), Vötsch VC 4060 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4060 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 600 liters Control System: S!MCON / 32 Cooling: water-cooled Refrigerant: R452A For sale is a used climate testing chamber from Vötsch. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical Data Test Chamber Dimensions: approx. 800 x 800 x 950 mm (W x D x H) Housing Dimensions: approx. 1090 x 1960 x 1995 mm (W x D x H) Weight: approx. 600 kg net Temperature Range: -40 °C to +180 °C Temperature Change Rate (Heating): approx. 4.0 K/min Temperature Change Rate (Cooling): approx. 3.0 K/min Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Deviation (Spatial): ±0.5 to ±2 K Temperature Gradient: approx. 1 to 4 K Climate Range (Temperature): -10 °C to +95 °C Humidity Range: 10 % to 98 % RH Humidity Deviation: ±0.1 to ±3 % RH Temperature Deviation (Climate Operation, Time): ±0.1 to ±0.3 K Temperature Deviation (Climate Operation, Spatial): ±0.5 to ±1.0 K Temperature Gradient (Climate Operation): approx. 1 to 2 K Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 7.8 kW Rated Current: 15.0 A Fuse: 16 A slow-blow, on-site 1 cable entry Ø 50 mm installed on the left 1 cable entry Ø 125 mm installed on the right Test chamber made of stainless steel Touch panel operation Bedpfszf E E Tsx Aqteli Equipment S!MCON / 32 control system Touch panel operation Interior made of stainless steel Test chamber lighting Side cable entries Ø 50 mm and Ø 125 mm Shelving / test chamber equipment as shown in the pictures Water-cooled system Documentation / operating manual Accessories as shown in the pictures Application Areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Supply 1x Vötsch VC 4060 Climate Testing Chamber Documentation / operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Note: The unit has been converted to use R452A refrigerant. Scope of supply as pictured. Subject to changes and errors in the technical data, as well as prior sale.