Used Vlastuin Ob-18-30-Bk Tridec Besturing 2 Assen for sale (92,795)

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 03/2022, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 1,250 mm, suspension: air, tire size: 385/55 R22,5, Year of construction: 2022, = Additional Options and Equipment = - Alloy wheels - Air suspension - SAF axles - Warning lights - Toolbox = Notes = 1st and 2nd axle with Tridec turntable steering Bwedpfx Aaezrl Hqs Iou Toolbox Lashing rings Stake pockets Hardwood floor All-round warning lights Work lights Length: 1,360 cm Width: 255 cm Floor height: 125 cm Front wall height: 255 cm Center of king pin to rear: 1,200 cm = Further Information = General Information Model year: 2026 Registration number: OT-46-GD Axle Configuration Tire size: 385/55 R22.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 10,000 kg; Steerable; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Max. axle load: 10,000 kg; Steerable; Tire tread left: 70%; Tire tread right: 70% Weights Unladen weight: 9,300 kg Payload: 28,700 kg Gross vehicle weight: 38,000 kg Maintenance APK (MOT/Technical Inspection): valid until 04.2027 Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Year of construction: 2020, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 25140, Equipment: CE marking, Secondary screen with two decks, 1200 x 2500 [mm], surface area 3.0 [m2], weight 1400 [kg], polyurethane mesh, square mesh sizes of 65 and 5 [mm]. Side tensioning, speed 900 [min-1], inclination 7°, 5.5 [kW] electric motor, pulley, V-belt, protective housing on the drive side and opposite bearing, compression springs. Machine sold without a chassis. Upon request, we can manufacture a custom chassis with the included chutes. Bwedpfxsz Dkxye Aa Iju

Condition: like new (used), JBT Double D 2 rack rotary oven. Takes 2 x 18 x 30 racks. Very clean and tidy. For bakery use. Bwedehyuchspfx Aa Isu

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Bwodpfx Asy Hmfyoa Ieu Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. Bwsdpezxzagefx Aa Iju The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: good (used), Year of construction: 1997, operating hours: 20,000 h, Kuka KR 30/2 6-Axis Industrial Robot Manufacturer: KUKA Model: KR30-2 Rated total load: 30 kg Reach: 2000 mm Repeatability: ± 0.15 mm Controller: KUKA KR C1 (01-051-810) Kuka Teach Pendant KR C1 Bwodpfx Aajxgqmlj Ieu Weight: 867 kg Year of manufacture: 1997 Operating hours: Approx. 20,000 Robot Applications Loading and unloading of parts Machining Handling of parts Polishing Arc welding Palletizing Robot movement speed: Axis 1: 140º/s Axis 2: 126º/s Axis 3: 140º/s Axis 4: 260º/s Axis 5: 245º/s Axis 6: 322º/s Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1990, functionality: fully functional, ORMA Hydraulic Frame Presses DE 30/18 Manufacturer: Orma Machine Italy Year of manufacture: 1990 Bwsdpev Iv Sgefx Aa Iou Maximum working dimensions: 3000 x 1800 mm Maximum working depth: 90 mm Vertical pistons: 2 Maximum piston pressure: 2000 kg Horizontal pistons: 2 Motor: 0.55 kW Width = 850 mm Length = 3700 mm Height = 2310 mm Features: Robust frame Easy adjustment and adjustment of the orthogonality and parallelism of the cross members Working accuracy Easy locking and control of the double-acting pistons Installation for small workshops and for assembling and aligning various components such as doors, windows, louvre doors and windows, simple frames, etc. The pistons are oil-driven.

Year of construction: 2007, condition: ready for operation (used), A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026. Bwjdexfbczepfx Aa Iou

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Bwodpfxsz Hxpfo Aa Iju Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: like new (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 300 kW (407.89 HP), The temperature control unit from Technotrans is available for sale. It has been checked in the workshop for its functionality. A short description of the unit can be provided upon request. Medium: Water Heating capacity: 18 kW Operating temperature: max 95°C Direct cooling capacity: 364 kW Bwodpfxoxy Nx Tj Aa Iju Pump capacity: 165 l/min Max. pump pressure: 5.1 bar VA tank Interface: TTY 0-20mA with cable

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1478, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, travel distance Y-axis: 1,790 mm, travel distance Z-axis: 430 mm, workpiece height (max.): 120 mm, number of slots in tool magazine: 10, overall weight: 3,300 kg, Equipment: CE marking, Lightly used CNC machine from Cosmec in very good condition. Vacuum pump 100 m³ Automatic central lubrication Bwedoy Ihkgspfx Aa Iju Cooling 8 support beams Main motor with HSK63F Drilling unit with vertical, horizontal spindles + slot saw Safety mat at the front Safety fencing 2 control stations at the front Operator console Remote control Immediately available from Barneveld (from photo 2 onward)

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 stator knives: 2 Drive: 7,5 kW Double diagonal cut With roller feeder, electric control unit and sound insulation box Bjdpfx Aaoz Hxmdo Iewu

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Bwjdpfsz Hxlysx Aa Isu Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: ready for operation (used), Year of construction: 2015, A KUKA robot is offered. Axes: 6, control: KUKA KR C4, payload: 16kg, reach: 3102mm, repeat accuracy: +/-0.07mm, net weight: approx. 700kg, operating hours: approx. 44.000h. Documentation available. An on-site inspection is possible by appointment. Bwjdpfoxnz U Ajx Aa Isu

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Bwjdpfxjy Ur Hle Aa Iju Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: excellent (used), Year of construction: 2014, Clamping force: 180 t Screw diameter: 35 mm Screw diameter 2: 18 mm Shot volume: 35 cm3 Injection pressure: 1943 bar Distance between tie bars: 630 x 630 mm Platten dimensions: 890 x 890 mm Bwodpfozypnzjx Aa Iou Type: Multicomponent Drive: Electric

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Bjdpfx Asyf Uy Uoa Iswu Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: used, Kuka robot KR 30 L16-2, KRC 2 ED 05, KRC 2, KCP2 industrial robot. Bjdpfx Aajznkmhe Ijwu

Condition: used, empty load weight: 6,300 kg, maximum load weight: 11,700 kg, overall weight: 18,000 kg, first registration: 04/2008, total length: 9,400 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, wheelbase: 5,000 mm, Equipment: ABS, EBS, cooling unit, electronic stability program (ESP), tail-lift, Key Features Internal Reference: 26288M Chassis Number: VAH XXX 2PE 7PR S03 14 Serial Number: 422.393.523 Vehicle Model: 2 PEL 18 Refrigerated Box Trailer / HB / Swiss-Vehicle Vehicle Make: Hangler Product Category: Refrigerated Box Trailer Used / New / Demo: Used Date of First Registration: 04/30/2008 Last Periodic Technical Inspection (PTI) or TÜV: 10/10/2024 Overall Vehicle Condition: 6 Suspension: Air-Air Cab Vehicle Equipment: ABS, EBS, ESP Axles & Tires Axle 1: 445/45 R 19.5 /13mm, Disc brakes, Air suspension Axle 2: 445/45 R 19.5/13mm, Disc brakes, Air suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 18000 Payload: 11700 Unladen Weight: 6300 Vehicle Wheelbase: 5000 Vehicle Height: 3900 Vehicle Length: 9400 Vehicle Width: 2550 mm Body Body Manufacturer: Hangler Body Model: 2 PEL 18 Body Internal Dimensions L x W x H: 7250/2490/2700 Body Year of Manufacture: 2008 Tail Lift Tail Lift Brand: TRÖSCH Tail Lift Platform Length: 1800 Tail Lift Payload: 2000 Tail Lift Year of Manufacture: 2007 Refrigeration Unit Refrigeration Unit Brand: THERMO KING Bsdpfx Aasz Hq I Hj Iswu Refrigeration Capacity (Temperature): 30 Monitoring: Yes Zones: 1-Zone

Condition: like new (used), Year of construction: 2008, operating hours: 4,322 h, functionality: fully functional, FANUC ROBODRILL α-T21iF | 4,322 hours | 24,000 rpm | BT30 FANUC ROBODRILL α-T21iF – High-Speed CNC Machining Center A very well-maintained FANUC ROBODRILL with very low operating hours – approximately 4,322 run hours. The machine was manufactured in Japan in December 2008 and is equipped with a FANUC Series 31i-Model A5 CNC control, a high-speed 24,000 rpm spindle, and fast axis movements of up to 54 m/min. The machine is in very good technical and visual condition and can be inspected and demonstrated under power by prior arrangement. Approximately 50 pcs. of BT30 tool holders of various types and sizes are included in the price. Technical specifications Manufacturer: FANUC Model: ROBODRILL α-T21iF Type: A04B-0099-B112#BM Year of manufacture: 12/2008 Country of origin: Japan CNC control: FANUC Series 31i-Model A5 Run time: approximately 4,322 hours X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Rapid traverse X/Y/Z: up to 54 m/min Maximum spindle speed: 24,000 rpm Spindle taper: BT30 Automatic tool changer: 21 positions Maximum table load: 300 kg Bedpez Diqbjfx Aa Iewu Machine weight: approximately 2,100 kg Power requirement: 10 kVA Power supply: 3-phase, 200/220 V, 50/60 Hz CE marked: Yes Included in the price Approximately 50 pcs. of BT30 tool holders / clamping holders of various types and sizes. IMPORTANT The rotary table / 4th axis shown installed in the machine in the photographs is NOT included in the sale. The machine is available for inspection and demonstration under power by prior appointment.

Condition: good (used), Year of construction: 1985, Offer 26046 Technical data: - 2 motor-driven rollers - Manual adjustment of the top roller - Shaft diameter: 30 mm - Shaft rotation: 6 rpm - Roller diameter: 88 – 108 mm - Bending capacity approx.: – flat steel 50 x 8 mm – square profile 20 mm – round pipe 42 mm Bjdpfx Aaoyh I Afs Iowu - Drive: 380 V / 0.55 kW - with: – right / left operation - Tube roller set approx. 16 mm - Weight approx. 150 kg - Space requirement approx. W 650 x H 1300 x D 950 mm

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 07/2017, total length: 7,980 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, color: red, Year of construction: 2017, - Central lubrication system Axle configuration Suspension: Air suspension Front axle: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle: Twin tires; Max. axle load: 10,000 kg Weights Unladen weight: 4,360 kg Payload: 13,640 kg GVW: 18,000 kg Functional Body brand: LANGEFELD LPA 18 TL 6300 Loading platform height: 100 cm Condition Technical condition: very good Optical condition: very good # OFFER ## Langefeld LPA 18 TL 6300 – 18-ton tandem trailer – Extendable loading platform – Air-suspended ### General data Manufacturer: Langefeld Bwodpfx Aaszh Upyj Iou Type: LPA 18 TL 6300 Year of manufacture: 19.07.2017 Axle configuration: 2-axle tandem trailer Permissible total weight: 18,000 kg Axles: SAF 10-ton axles Suspension: Fully air-suspended Braking system: WABCO EBS with FleetBoard system This high-quality Langefeld LPA 18 TL 6300 is a professional machine and construction equipment transport trailer, characterized by its robust construction, excellent driving characteristics and high reliability. Thanks to the extendable loading platform, the extensive load securing system and the air-suspended SAF axles, this trailer is ideally suited for daily professional use. The trailer is in very good, fully original and excellently maintained condition. ## Dimensions Loading platform length: 630 cm Extendable rear: 155 cm Maximum loading platform length: 785 cm Loading platform width: 254 cm Overall width: 255 cm Loading platform height: 100 cm Overall length (retracted): 798 cm The extendable loading platform allows even particularly long machines, containers and components to be easily transported. ## Equipment The trailer is equipped with: * Fully air-suspended chassis * SAF 10-ton axles * WABCO FleetBoard system * Central lubrication system * Extendable loading platform * Twistlocks for container transport * Stake pockets * Stake boxes * Several heavy-duty lashing and tie-down points * Adjustable widening elements * Storage space for ramps * 4 stainless steel toolboxes * Robust, galvanized chassis for professional continuous use ## Technical advantages The air suspension in combination with the high-quality SAF axles ensures excellent driving comfort, optimal road handling and low maintenance costs. Thanks to the numerous lashing options and twistlocks, this trailer is suitable for the transport of both machines and containers. The central lubrication system significantly reduces maintenance effort and extends the life of all moving components. ## Ideally suited for the transport of * Construction machinery * Excavators * Wheel loaders * Telescopic handlers * Forklifts * Work platforms * Agricultural machinery * Containers * Steel structures * Long materials * Heavy machinery and vehicles of all kinds ## Tires * Tire tread approx. 70% * Ready for immediate use ## Condition This Langefeld LPA 18 TL 6300 is in very good technical and optical condition.

Condition: good (used), Year of construction: 2011, Industrial robot Manufacturer: Kuka Type: KR30L16-2 (SafeRobot) Year of manufacture: 2011 Bodpsn Uv S Aefx Aa Iswu Reach: 3102 mm Weight: 700 kg Payload: 16 kg Kuka controller KRC2ed05 (SafeRobot) Weight: 185 kg Processor: 2 GHz Operating system: WinXP Software version: V5.6.6 Kuka teach pendant KCP2 Kuka connection cables 7m/15m 28926

Condition: used, Year of construction: 2016, operating hours: 3,165 h, Equipment: all wheel drive, * enclosed cab * dozer blade * 2 buckets * additional hydraulics ----Vehicle number: 12485----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.----We would be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: ----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Bodpfxsz E Uifo Aa Ijwu Arrangement of financing Application for export registration plates Vehicle transport Vehicle registration Recovery and vehicle transport ?YOUR VTS TEAM

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 1354.18, functionality: fully functional, operating hours: 8,000 h, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 300 mm, operating speed: 60 mm/s, table width: 550 mm, table length: 400 mm, total height: 20,000 mm, overall weight: 2,500 kg, installation height: 500 mm, Technical data: Pressing force 30 t Stroke 300 mm Installation height 500 mm Fold-through hole in table 120 mm Front passage 550 mm Usable table depth 400 mm Usable table width 550 mm Speed from 60 mm/sec. Speed up to 180 mm/sec. Hydraulic oil tank capacity 400 l Drive power 7.5 kW External dimensions L x W x D 1200 x 2000 x 2600 mm Weight 2.5 t With - 2-hand release - light barrier - safety cage - Infinitely variable pressure control, preselection with digital display Bwodpfx Aajtrd Ube Isu - Infinitely variable speed control - 8000 switch-on hours - CE marking - complies with UVV